Makita HM1812 Handleiding

Makita Breekhamers HM1812

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita HM1812 (32 pagina's) in de categorie Breekhamers. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

GB Electric Breaker Instruction Manual

F Marteau-Piqueur Manuel d’instructions

D Stemmhammer Betriebsanleitung

I Demolitore elettrico Istruzioni per l’uso

NL Elektrische breekhamer Gebruiksaanwijzing

E Demoledor Eléctrico Manual de instrucciones

P Martelo Demolidor Manual de instruções

DK Opbrydningshammer Brugsanvisning

GR Ηλεκτρικό πιστολέτο κατεδαφίσεων Οδηγίες χρήσεως

TR Elektrkli Kırıcı Kullanma kılavuzu

HM1802

HM1812

1015520 2015521

3015522 4015619

910

5015523 6015524

7015525 8015606

ENGLISH (Original instructions)

Explanation of general view

• Due to our continuing program of research and

development, the specications herein are subject to

change without notice.

• Specications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE046-1

Intended use

The tool is intended for heavy chiselling and demolition

work as well as for driving and compacting with

appropriate accessories.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, re and/or

serious injury.

Save all warnings and instructions for

futurereference.

GEB004-6

HAMMER SAFETY WARNINGS

1. Wear ear protectors. Exposure to noise can cause

hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

4. Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses

are NOT safety glasses. It is also highly

recommended that you wear a dust mask and

thickly padded gloves.

1 Switch lever

2 Power-ON indicator lamp

(green)

3 Service indicator lamp (red)

4 Soft grip

5 Bolt

6 Triangle alignment mark

7 Bit with collar

8 Bit without collar

9 Bit

10 Tool retainer

11 Tool holder

12 Notched portion of the bit

SPECIFICATIONS

Model HM1802 HM1812

Blows per minute 870

Dimensions 843 x 210 x 608 mm

Net weight 29.4 kg 31.3 kg

Safety class /II

5. Be sure the bit is secured in place before

operation.

6. Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

7. In cold weather or when the tool has not been

used for a long time, let the tool warm up for

a while by operating it under no load. This will

loosen up the lubrication. Without proper warm-

up, hammering operation is difcult.

8. Always be sure you have a rm footing.

Be sure no one is below when using the tool in

high locations.

9. Hold the tool rmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12. Do not point the tool at any one in the area

when operating. The bit could y out and injure

someone seriously.

13. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

14. Do not operate the tool at no-load unnecessarily.

15. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE

or failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

Product specificaties

Merk:	Makita
Categorie:	Breekhamers
Model:	HM1812
Kleur van het product:	Black,Blue
Breedte:	843 mm
Diepte:	210 mm
Hoogte:	608 mm
Soft grip:	Ja
Input vermogen:	2000 W
Aantal slagen:	870 bpm
Aanslag-energie:	72.8 J
Trillingsniveau (beitelen):	6.5 m/s²
Gereedschapshouder:	- mm