Makita HM002GZ03 Handleiding

Makita Niet gecategoriseerd HM002GZ03

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita HM002GZ03 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/20
INSTRUCTION MANUAL
Cordless Demolition Hammer
HM002G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: HM002G
Blows per minute 950 - 1,900 min-1
Rated voltage D.C. 72 V - 80 V max
Overall length 574 mm
Net weight 12.0 - 13.3 kg
โ€ข๎˜ƒ Due๎˜ƒto๎˜ƒour๎˜ƒcontinuing๎˜ƒprogram๎˜ƒof๎˜ƒresearch๎˜ƒand๎˜ƒdevelopment,๎˜ƒthe๎˜ƒspeci๎šฟcations๎˜ƒherein๎˜ƒare๎˜ƒsubject๎˜ƒto๎˜ƒchange๎˜ƒ
without notice.
โ€ข๎˜ƒ Speci๎šฟcations๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒfrom๎˜ƒcountry๎˜ƒto๎˜ƒcountry.
โ€ข๎˜ƒ The๎˜ƒweight๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒdepending๎˜ƒon๎˜ƒthe๎˜ƒattachment(s),๎˜ƒincluding๎˜ƒthe๎˜ƒbattery๎˜ƒcartridge.๎˜ƒThe๎˜ƒlightest๎˜ƒand๎˜ƒheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎˜ƒcartridge BL4020 / BL4025 / BL4040* / BL4050F*
*๎˜ƒ:๎˜ƒRecommended๎˜ƒbattery
Charger DC40RA / DC40RB / DC40RC
โ€ข๎˜ƒ Some๎˜ƒof๎˜ƒthe๎˜ƒbattery๎˜ƒcartridges๎˜ƒand๎˜ƒchargers๎˜ƒlisted๎˜ƒabove๎˜ƒmay๎˜ƒnot๎˜ƒbe๎˜ƒavailable๎˜ƒdepending๎˜ƒon๎˜ƒyour๎˜ƒregion๎˜ƒof๎˜ƒ
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎˜ƒUse๎˜ƒof๎˜ƒany๎˜ƒother๎˜ƒbattery๎˜ƒcartridges๎˜ƒ
and๎˜ƒchargers๎˜ƒmay๎˜ƒcause๎˜ƒinjury๎˜ƒand/or๎˜ƒ๎šฟre.
Symbols
The๎˜ƒfollowings๎˜ƒshow๎˜ƒthe๎˜ƒsymbols๎˜ƒwhich๎˜ƒmay๎˜ƒbe๎˜ƒused๎˜ƒ
for๎˜ƒthe๎˜ƒequipment.๎˜ƒBe๎˜ƒsure๎˜ƒthat๎˜ƒyou๎˜ƒunderstand๎˜ƒtheir๎˜ƒ
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only๎˜ƒfor๎˜ƒEU๎˜ƒcountries
Do not dispose of electric equipment or
battery๎˜ƒpack๎˜ƒtogether๎˜ƒwith๎˜ƒhousehold๎˜ƒwaste๎˜ƒ
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries๎˜ƒand๎˜ƒbattery๎˜ƒpack(s)๎˜ƒthat๎˜ƒhave๎˜ƒ
reached the end of their life must be col-
lected๎˜ƒseparately๎˜ƒand๎˜ƒreturned๎˜ƒto๎˜ƒan๎˜ƒenvi-
ronmentally๎˜ƒcompatible๎˜ƒrecycling๎˜ƒfacility.
Intended use
The tool is intended for chiselling work in concrete,
brick, stone and asphalt as well as for driving and com-
pacting with appropriate accessories.
Noise
The๎˜ƒtypical๎˜ƒA-weighted๎˜ƒnoise๎˜ƒlevel๎˜ƒdetermined๎˜ƒaccord-
ing to EN60745-2-6:
Sound๎˜ƒpressure๎˜ƒlevel๎˜ƒ(L
PA)๎˜ƒ:๎˜ƒ92๎˜ƒdB(A)
Sound๎˜ƒpower๎˜ƒlevel๎˜ƒ(L
WA)๎˜ƒ:๎˜ƒ103๎˜ƒdB๎˜ƒ(A)
Uncertainty๎˜ƒ(K)๎˜ƒ:๎˜ƒ3๎˜ƒdB(A)
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒnoise๎˜ƒemission๎˜ƒvalue(s)๎˜ƒhas๎˜ƒ
been measured in accordance with a standard test
method๎˜ƒand๎˜ƒmay๎˜ƒbe๎˜ƒused๎˜ƒfor๎˜ƒcomparing๎˜ƒone๎˜ƒtool๎˜ƒwith๎˜ƒ
another.
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒnoise๎˜ƒemission๎˜ƒvalue(s)๎˜ƒ
may๎˜ƒalso๎˜ƒbe๎˜ƒused๎˜ƒin๎˜ƒa๎˜ƒpreliminary๎˜ƒassessment๎˜ƒof๎˜ƒ
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can di๓ฐ€จer from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o๓ฐ€จ and when it is running idle in addition to the
trigger time).
Vibration
The๎˜ƒvibration๎˜ƒtotal๎˜ƒvalue๎˜ƒ(tri-axial๎˜ƒvector๎˜ƒsum)๎˜ƒdeter-
mined according to EN60745-2-6:
Work mode: chiselling function with side handle
Vibration๎˜ƒemission๎˜ƒ(a
h, Cheq):๎˜ƒ8.0๎˜ƒm/s2
Uncertainty๎˜ƒ(K)๎˜ƒ:๎˜ƒ1.5๎˜ƒm/s
2
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒvibration๎˜ƒtotal๎˜ƒvalue(s)๎˜ƒhas๎˜ƒbeen๎˜ƒ
measured in accordance with a standard test method
and๎˜ƒmay๎˜ƒbe๎˜ƒused๎˜ƒfor๎˜ƒcomparing๎˜ƒone๎˜ƒtool๎˜ƒwith๎˜ƒanother.
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒvibration๎˜ƒtotal๎˜ƒvalue(s)๎˜ƒmay๎˜ƒalso๎˜ƒ
be๎˜ƒused๎˜ƒin๎˜ƒa๎˜ƒpreliminary๎˜ƒassessment๎˜ƒof๎˜ƒexposure.
3 ENGLISH
WARNING: The vibration emission during
actual use of the power tool can di๓ฐ€จer from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o๓ฐ€จ and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The๎˜ƒEC๎˜ƒdeclaration๎˜ƒof๎˜ƒconformity๎˜ƒis๎˜ƒincluded๎˜ƒas๎˜ƒAnnex๎˜ƒA๎˜ƒ
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speci๎šฟcations provided
with this power tool. Failure to follow all instructions
listed๎˜ƒbelow๎˜ƒmay๎˜ƒresult๎˜ƒin๎˜ƒelectric๎˜ƒshock,๎˜ƒ๎šฟre๎˜ƒand/or๎˜ƒ
serious๎˜ƒinjury.
Save all warnings and instruc-
tions for future reference.
The๎˜ƒterm๎˜ƒ"power๎˜ƒtool"๎˜ƒin๎˜ƒthe๎˜ƒwarnings๎˜ƒrefers๎˜ƒto๎˜ƒyour๎˜ƒ
mains-operated๎˜ƒ(corded)๎˜ƒpower๎˜ƒtool๎˜ƒor๎˜ƒbattery-operated๎˜ƒ
(cordless)๎˜ƒpower๎˜ƒtool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎›€ammable
liquids, gases or dust. Power tools create sparks
which๎˜ƒmay๎˜ƒignite๎˜ƒthe๎˜ƒdust๎˜ƒor๎˜ƒfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎˜ƒto๎˜ƒlose๎˜ƒcontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎šฟed๎˜ƒplugs๎˜ƒand๎˜ƒmatching๎˜ƒoutlets๎˜ƒwill๎˜ƒ
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎˜ƒshock๎˜ƒif๎˜ƒyour๎˜ƒbody๎˜ƒis๎˜ƒearthed๎˜ƒor๎˜ƒgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
๎šฟelds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎›€uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎˜ƒtools๎˜ƒmay๎˜ƒresult๎˜ƒin๎˜ƒserious๎˜ƒpersonal๎˜ƒinjury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as๎˜ƒa๎˜ƒdust๎˜ƒmask,๎˜ƒnon-skid๎˜ƒsafety๎˜ƒshoes,๎˜ƒhard๎˜ƒhat๎˜ƒor๎˜ƒ
hearing protection used for appropriate conditions
will๎˜ƒreduce๎˜ƒpersonal๎˜ƒinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the o๓ฐ€จ-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.๎˜ƒCarrying๎˜ƒpower๎˜ƒtools๎˜ƒwith๎˜ƒ
your๎˜ƒ๎šฟnger๎˜ƒon๎˜ƒthe๎˜ƒswitch๎˜ƒor๎˜ƒenergising๎˜ƒpower๎˜ƒtools๎˜ƒ
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.๎˜ƒA๎˜ƒwrench๎˜ƒor๎˜ƒa๎˜ƒkey๎˜ƒleft๎˜ƒ
attached๎˜ƒto๎˜ƒa๎˜ƒrotating๎˜ƒpart๎˜ƒof๎˜ƒthe๎˜ƒpower๎˜ƒtool๎˜ƒmay๎˜ƒ
result๎˜ƒin๎˜ƒpersonal๎˜ƒinjury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.๎˜ƒLoose๎˜ƒclothes,๎˜ƒjewellery๎˜ƒor๎˜ƒ
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can๎˜ƒcause๎˜ƒsevere๎˜ƒinjury๎˜ƒwithin๎˜ƒa๎˜ƒfraction๎˜ƒof๎˜ƒa๎˜ƒ
second.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.

Product specificaties

Merk: Makita
Categorie: Niet gecategoriseerd
Model: HM002GZ03

Heb je hulp nodig?

Als je hulp nodig hebt met Makita HM002GZ03 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Makita

Makita

Makita UN001G Handleiding

5 September 2024
Makita

Makita TM001G Handleiding

5 September 2024
Makita

Makita DJS101 Handleiding

28 Mei 2024
Makita

Makita ADP05 Handleiding

7 Mei 2024
Makita

Makita DC4001 Handleiding

7 Mei 2024
Makita

Makita BCV03 Handleiding

7 Mei 2024
Makita

Makita DC18WA Handleiding

7 Mei 2024
Makita

Makita DML803 Handleiding

7 Mei 2024
Makita

Makita DCJ205 Handleiding

7 Mei 2024
Makita

Makita RM350D Handleiding

8 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec

Vitec MGW Diamond-HX OG Handleiding

23 November 2024
Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024