Makita DTWA140Z Handleiding

Makita Schroefmachine DTWA140Z

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DTWA140Z (16 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

INSTRUCTION MANUAL

Cordless Impact Wrench

DTWA070

DTWA100

DTWA140

DTWA190

ENGLISH: Original instructions

IMPORTANT: Read Before Using.

2 ENGLISH

SPECIFICATIONS

Model: DTWA070 DTWA100 DTWA140 DTWA190

Fastening capacities Standard bolt M5 - M12 M6 - M16 M8 - M16

High tensile bolt M5 - M10 M6 - M12 M8- M14

Maximum fastening torque 65 N•m 95 N•m 140 N•m 185 N•m

Torque range Approx.

5 - 40 N•m

Approx.

6 - 65 N•m

Approx.

18 - 80 N•m

Approx.

25 - 125 N•m

Square drive 9.5 mm 12.7 mm

No load speed (RPM) 0 - 2,500 min-1 0 - 2,700 min-1 0 - 2,600 min-1

Impacts per minute 0 - 3,700 min-1 0 - 3,300 min-1 0 - 3,000 min-1

Overall length 144 mm 151 mm 158 mm

Rated voltage D.C. 14.4 V

Net weight 1.1 - 1.4 kg 1.2 - 1.4 kg 1.2 - 1.5 kg 1.3 - 1.6 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 /

BL1460A / BL1460B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingsshowthesymbolsusedfortheequip-

ment.Besurethatyouunderstandtheirmeaningbefore

use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Do not dispose of electric equipment or

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

Intended use

The tool is intended for fastening bolts and nuts.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-2:

Model DTWA070

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty(K):3dB(A)

Model DTWA100

Sound pressure level (L

pA) : 93 dB(A)

Sound power level (L

WA) : 104 dB (A)

Uncertainty(K):3dB(A)

Model DTWA140

Sound pressure level (L

pA) : 96 dB(A)

Sound power level (L

WA) : 107 dB (A)

Uncertainty(K):3dB(A)

Model DTWA190

Sound pressure level (L

pA) : 95 dB(A)

Sound power level (L

WA) : 106 dB (A)

Uncertainty(K):3dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE: The declared noise emission value(s)

mayalsobeusedinapreliminaryassessmentof

exposure.

3 ENGLISH

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-2:

Model DTWA070

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 9.0 m/s2

Uncertainty(K):1.5m/s

Model DTWA100

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 8.5 m/s2

Uncertainty(K):1.5m/s

Model DTWA140

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 10.0 m/s2

Uncertainty(K):1.5m/s

Model DTWA190

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 10.5 m/s2

Uncertainty(K):1.5m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalso

beusedinapreliminaryassessmentofexposure.

WARNING: The vibration emission during

actual use of the power tool can differ from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

youtolosecontrol.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical

devices should contact the maker of their device and/

or doctor for advice before operating this power tool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

Product specificaties

Merk:	Makita
Categorie:	Schroefmachine
Model:	DTWA140Z

Heb je hulp nodig?

Als je hulp nodig hebt met Makita DTWA140Z stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Schroefmachine Makita

Makita DDA350Y1J Handleiding

23 November 2024

Makita DDF446RTJ Handleiding

23 November 2024

Makita DDF448Y1J Handleiding

23 November 2024

Makita 6407 Handleiding

21 Juni 2023

Makita TD022DSE Handleiding

20 Juni 2023

Makita 6905B Handleiding

19 Juni 2023

Makita 6842J Handleiding

19 Juni 2023

Makita DTW285RTJ Handleiding

18 Juni 2023

Makita 6805BV Handleiding

15 Juni 2023

Makita DTS130 Handleiding

12 Juni 2023

Handleiding Schroefmachine

Nieuwste handleidingen voor Schroefmachine

Gude MS 4.0-150-17 4in1 Akku-Schrauber inkl. Koffer + Akku 1.5Ah + Zub Handleiding

16 December 2024

Total TCKLI2006 Handleiding

16 December 2024

Total TAT40122 Handleiding

16 December 2024

Total TAT40342 Handleiding

16 December 2024

Hilti SID 2‑A12 Handleiding

9 December 2024

Black Decker 2038 Handleiding

8 December 2024

Silverline 248250 Handleiding

5 December 2024

Bavaria BSD 3,6/1 Li Handleiding

5 December 2024

Hilti HRD-H Handleiding

5 December 2024

Einhell RT-SD 4,8 Handleiding

4 December 2024