Makita DTW701RTJ Handleiding

Makita Schroefmachine DTW701RTJ

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DTW701RTJ (16 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

INSTRUCTION MANUAL

Cordless Impact Wrench

DTW700

DTW701

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DTW700 DTW701

Fastening capacities Standard bolt M10 - M24

High tensile bolt M10 - M16

Square drive 12.7 mm

No load speed Max impact mode (4) 0 - 2,200 min

-1

Hard impact mode (3) 0 - 1,900 min

-1

Medium impact mode (2) 0 - 1,200 min

-1

Soft impact mode (1) 0 - 500 min

-1

Impacts per minute Max impact mode (4) 0 - 2,700 min

-1

Hard impact mode (3) 0 - 2,400 min

-1

Medium impact mode (2) 0 - 1,700 min

-1

Soft impact mode (1) 0 - 1,000 min

-1

Overall length 170 mm

Rated voltage D.C. 18 V

Net weight 2.3 - 2.7 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingsshowthesymbolswhichmaybeused

fortheequipment.Besurethatyouunderstandtheir

meaning before use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Do not dispose of electric equipment or

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

Intended use

The tool is intended for fastening bolts and nuts.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-1:

Model DTW700

Sound pressure level (L

pA) : 94 dB(A)

Sound power level (L

WA) : 105 dB (A)

Uncertainty(K):3dB(A)

Model DTW701

Sound pressure level (L

pA) : 94 dB(A)

Sound power level (L

WA) : 105 dB (A)

Uncertainty(K):3dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE: The declared noise emission value(s)

mayalsobeusedinapreliminaryassessmentof

exposure.

3 ENGLISH

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched o and when

it is running idle in addition to the trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-1:

Model DTW700

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 19.0 m/s2

Uncertainty(K):2.0m/s

Model DTW701

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 19.0 m/s2

Uncertainty(K):2.0m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalso

beusedinapreliminaryassessmentofexposure.

WARNING:

The vibration emission during actual

use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched o and when

it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

youtolosecontrol.

Electrical safety

Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodiedplugsand

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However, users of pacemakers and other similar

medical devices should contact the maker of their

device and/or doctor for advice before operating

this power tool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection. Protective equipment such

asadustmask,non-skidsafetyshoes,hardhator

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the o-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.Carryingpowertoolswith

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

Product specificaties

Merk:	Makita
Categorie:	Schroefmachine
Model:	DTW701RTJ
Kleur van het product:	Black, Blue
Gewicht:	1980 g
Breedte:	81 mm
Diepte:	170 mm
Hoogte:	276 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Soft grip:	Ja
Inactieve snelheid (1ste versnelling):	500 RPM
Inactieve snelheid (2e versnelling):	1200 RPM
Stationair toerental (max):	1000 RPM
Maximum koppel:	200 Nm
Geluidsdrukniveau:	105 dB
Reverse:	Ja
Boorhouder:	Kop met quick-release
Ingebouwd licht:	Ja
Maximale koppel (zachte applicaties):	320 Nm
Maximale koppel (harde applicaties):	700 Nm
Inclusief acculader:	Ja
Inclusief batterij:	Ja
Geluidsniveau onzekerheid:	3 dB
Moment (min):	150 Nm
Boorkopdiameter:	1/2"
Handgreepvorm:	Pistoolhandgreep
Aantal inbegrepen batterijen:	1 stuk(s)
Type product:	Slagmoersleutel
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Type motor:	Borstelloos
Geluidsvermogensniveau:	94 dB
Inactieve snelheid (3e versnelling):	1900 RPM
Inactieve snelheid (4e versnelling):	1900 RPM