Makita DTD171Z Handleiding

Makita Schroefmachine DTD171Z

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DTD171Z (16 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

INSTRUCTION MANUAL

Cordless Impact Driver

DTD171

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DTD171

Fastening capacities Machine screw 4 mm - 8 mm

Standard bolt 5 mm - 16 mm

High tensile bolt 5 mm - 14 mm

No load speed Max impact mode 0 - 3,600 min

-1

Hard impact mode 0 - 3,200 min

-1

Medium impact mode 0 - 2,100 min

-1

Soft impact mode 0 - 1,100 min

-1

Wood mode 0 - 1,800 min-1

Bolt mode 0 - 3,600 min-1

T mode (1) 0 - 2,900 min-1

T mode (2) 0 - 3,600 min-1

Impacts per minute Max impact mode 0 - 3,800 min

-1

Hard impact mode 0 - 3,600 min

-1

Medium impact mode 0 - 2,600 min

-1

Soft impact mode 0 - 1,100 min

-1

Wood mode 0 - 3,800 min-1

Bolt mode 0 - 3,800 min-1

T mode (1) -

T mode (2) 0 - 2,600 min-1

Rated voltage D.C. 18 V

Overall length 116 mm

Net weight 1.2 - 1.5 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingshowthesymbolsusedfortheequip-

ment.Besurethatyouunderstandtheirmeaningbefore

use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Donotdisposeofelectricequipmentor

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

EquipmentandBatteriesandAccumulators

and Waste Batteries and Accumulators

and their implementation in accordance

withnationallaws,electricequipmentand

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

3 ENGLISH

Intended use

The tool is intended for screw driving in wood, metal

and plastic.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-2:

Sound pressure level (L

pA) : 97 dB(A)

Sound power level (L

WA) : 108 dB (A)

Uncertainty(K):3dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-2:

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 13.5 m/s2

Uncertainty(K):1.5m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE: The declared vibration emission value

mayalsobeusedinapreliminaryassessmentof

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emissionvaluedependingonthewaysinwhichthe

tool is used.

WARNING:Besuretoidentifysafetymeasures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

accountofallpartsoftheoperatingcyclesuchas

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

youtolosecontrol.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical

devices should contact the maker of their device and/

or doctor for advice before operating this power tool.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

asadustmask,non-skidsafetyshoes,hardhator

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.Carryingpowertoolswith

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

Product specificaties

Merk:	Makita
Categorie:	Schroefmachine
Model:	DTD171Z
Kleur van het product:	Black, Blue
Gewicht:	1200 g
Diepte:	116 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Inactieve snelheid (1ste versnelling):	1100 RPM
Inactieve snelheid (2e versnelling):	2100 RPM
Stationair toerental (max):	3600 RPM
Maximum koppel:	180 Nm
Reverse:	Ja
Ingebouwd licht:	Ja
Aanpasbare snelheid:	Ja
Boorkopdiameter:	1/4"
Handgreepvorm:	Pistoolhandgreep
Type product:	Elektrische schroevendraaier
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Geluidsvermogensniveau:	108 dB
Slagsnelheid:	3800 IPM
Inactieve snelheid (3e versnelling):	3200 RPM
Inactieve snelheid (4e versnelling):	3600 RPM
Aantal slagen (min):	1100 IPM