Makita DRT50ZJX2 Handleiding
Makita
Freesmachine
DRT50ZJX2
Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DRT50ZJX2 (24 pagina's) in de categorie Freesmachine. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/24
INSTRUCTION MANUAL
Cordless Trimmer
DRT50
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DRT50
Collet chuck capacity 6 mm, 8 mm, 1/4", or 3/8"
No load speed 10,000 - 30,000 min
-1
Overall length 226 mm
Rated voltage D.C. 18 V
Standard battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Net weight 1.8 - 2.1 kg
without notice.
-
Symbols
-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
and their implementation in accordance
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
wood, plastic and similar materials.
Noise
-
ing to EN60745:
WARNING: Wear ear protection.
Vibration
-
mined according to EN60745:
Work mode: rotation without load
h2 or less
2
Work mode: cutting grooves in MDF
h2
2
NOTE:
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:
may also be used in a preliminary assessment of
WARNING:
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
EC Declaration of Conformity
For European countries only
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
with this power tool. Failure to follow all instructions
-
tions for future reference.
3 ENGLISH
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. -
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
reduce risk of electric shock.
2.
surfaces, such as pipes, radiators, ranges and
refrigerators.-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4.
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
-
ication.
2.
wear eye protection.
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
3.
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
that have the switch on invites accidents.
4.
turning the power tool on.
attached to a rotating part of the power tool may
5.
balance at all times.
6. Dress properly. Do not wear loose clothing or
long hair can be caught in moving parts.
7.
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.
9.
must comply with ANSI Z87.1 in the USA, EN 166 in
Europe, or AS/NZS 1336 in Australia/New Zealand. In
Australia/New Zealand, it is legally required to wear
a face shield to protect your face, too.
It is an employer's responsibility to enforce
-
ments by the tool operators and by other per-
sons in the immediate working area.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application.
rate for which it was designed.
2.
Do not use the power tool if the switch does not turn
it on and off.
with the switch is dangerous and must be repaired.
3. Disconnect the plug from the power source
-
ments, changing accessories, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
5.
Maintain power tools and accessories. Check for
-
age of parts and any other condition that may
the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
Product specificaties
Merk: | Makita |
Categorie: | Freesmachine |
Model: | DRT50ZJX2 |
Kleur van het product: | Black, Blue, Silver |
Gewicht: | 2100 g |
Breedte: | 89 mm |
Diepte: | 226 mm |
Hoogte: | 134 mm |
Stroombron: | Batterij/Accu |
Input vermogen: | - W |
Stationair toerental (max): | 30000 RPM |
Spantang diameter: | 35 mm |
Geluidsvermogensniveau: | 78 dB |
Totale lengte: | 226 mm |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita DRT50ZJX2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Freesmachine Makita
21 Februari 2024
21 Februari 2024
9 Juli 2023
18 Juni 2023
10 Mei 2023
3 Mei 2023
30 April 2023
12 April 2023
8 April 2023
19 Maart 2023
Handleiding Freesmachine
- Freesmachine Bosch
- Freesmachine DeWalt
- Freesmachine Al-ko
- Freesmachine Alpina
- Freesmachine Bort
- Freesmachine Bruder Mannesmann
- Freesmachine Duro
- Freesmachine Einhell
- Freesmachine Elu
- Freesmachine Felisatti
- Freesmachine Ferm
- Freesmachine Festool
- Freesmachine Flex
- Freesmachine Fuxtec
- Freesmachine Gamma
- Freesmachine Gardena
- Freesmachine Grizzly
- Freesmachine Gude
- Freesmachine Hitachi
- Freesmachine Holzmann
- Freesmachine Kinzo
- Freesmachine Maktec
- Freesmachine Parkside
- Freesmachine Powerplus
- Freesmachine Protool
- Freesmachine Rupes
- Freesmachine Scheppach
- Freesmachine Skil
- Freesmachine Stanley
- Freesmachine Stomer
- Freesmachine Texas
- Freesmachine Toledo
- Freesmachine Topcraft
- Freesmachine Triton
- Freesmachine Trotec
- Freesmachine Vonroc
- Freesmachine Westfalia
- Freesmachine Worx
- Freesmachine Ozito
- Freesmachine Black And Decker
- Freesmachine Meec Tools
- Freesmachine Carat
- Freesmachine Eibenstock
- Freesmachine Power Craft
- Freesmachine Truper
- Freesmachine Mafell
- Freesmachine Rikon
- Freesmachine Yato
- Freesmachine Trend
- Freesmachine CMT Orange Tools
Nieuwste handleidingen voor Freesmachine
18 November 2024
29 Augustus 2024
29 Augustus 2024
26 Augustus 2024
26 Juni 2024
9 Juni 2024
20 Maart 2024
12 Maart 2024
12 Maart 2024
20 Februari 2024