Makita DP2011 Handleiding

Makita Schroefmachine DP2011

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DP2011 (40 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 86 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

DP2010

DP2011

EN High Speed Drill INSTRUCTION MANUAL 3

FR Perceuse à Haute Vitesse MANUEL D’INSTRUCTIONS 6

DE Hochgeschwindigkeits-

Bohrmaschine BETRIEBSANLEITUNG 10

IT Trapano ad alta velocità ISTRUZIONI PER L’USO 14

NL Hoge-snelheid boormachine GEBRUIKSAANWIJZING 18

ES Taladro de Alta Velocidad MANUAL DE

INSTRUCCIONES 22

PT Furadeira de Alta Velocidade MANUAL DE INSTRUÇÕES 26

DA Højhastighedsboremaskine BRUGSANVISNING 30

EL Τρυπάνι υψηλής ταχύτητας ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓΙΩΝ 33

TR Yüksek Hızlı Matkap KULLANMA KILAVUZU 37

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

3 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: DP2010 DP2011

Drilling capacities 6.5 mmSteel

Wood 15 mm

No load speed 0 - 4,200 min-1

Overall length 209 mm 222 mm

Net weight 1.0 kg 1.1 kg

Safety class /II

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may di󰀨er from country to country.

• Weight according to EPTA-Procedure 01/2014

Intended use

The tool is intended for drilling in wood, metal and

plastic.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-1:

Sound pressure level (LpA) : 77 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can di󰀨er from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o󰀨 and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-1:

Work mode: drilling into metal

Vibration emission (a

h,D) : 3.1 m/s2

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during actual

use of the power tool can di󰀨er from the declared val-

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched o󰀨 and when

it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listed below may result in electric shock, re and/or

serious injury.

Product specificaties

Merk:	Makita
Categorie:	Schroefmachine
Model:	DP2011
Kleur van het product:	Black, Blue
Gewicht:	1100 g
Breedte:	64 mm
Diepte:	222 mm
Hoogte:	175 mm
Snoerlengte:	2.5 m
Stroombron:	AC
Input vermogen:	370 W
Inactieve snelheid (1ste versnelling):	4200 RPM
Stationair toerental (max):	4200 RPM
Boor diameter in staal (max):	6.5 mm
Boor diameter in hout (max):	15 mm
Aantal versnellingen:	1
Boorhouder:	Zonder sleutel
Boorstift inbegrepen:	Ja