Makita DHR281ZJ Handleiding

Makita Hamer DHR281ZJ

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DHR281ZJ (28 pagina's) in de categorie Hamer. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

INSTRUCTION MANUAL

Cordless Combination Hammer

DHR280

DHR281

DHR282

DHR283

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DHR280 DHR281 DHR282 DHR283

Capacities Concrete 28 mm

Core bit 54 mm

Diamond core bit (dry type) 65 mm

Steel 13 mm

Wood 32 mm

No load speed 0 - 980 min-1

Blows per minute 0 - 5,000 min-1

Overall length 373 mm 404 mm 373 mm 404 mm

Rated voltage D.C. 36 V

Net weight 3.9 - 5.1 kg

Optional accessory

Model: DX08 (For DHR280/DHR282) DX09 (For DHR281/DHR283)

Suction performance 350 l/min

Operating stroke Up to 190 mm

Suitable drill bit Up to 260 mm

Rated voltage D.C. 18 V

Net weight 1.6 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge

BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B

• Some of the battery cartridges listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause

injuryand/orre.

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or battery

pack together with household waste material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone as well as for chiselling work.

It is also suitable for drilling without impact in wood,

metal, ceramic and plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745-2-6:

Model DHR280

Sound pressure level (L

pA) : 93 dB(A)

Sound power level (L

WA) : 104 dB (A)

Uncertainty (K) : 3 dB(A)

Model DHR281

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

Model DHR282

Sound pressure level (L

pA) : 93 dB(A)

Sound power level (L

WA) : 104 dB (A)

Uncertainty (K) : 3 dB(A)

Model DHR283

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

Model DHR280 with DX08

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

3 ENGLISH

Model DHR281 with DX09

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

Model DHR282 with DX08

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

Model DHR283 with DX09

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745-2-6:

Model DHR280

Work mode: hammer drilling into concrete

Vibration emission (a

h, HD): 9.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: hammer drilling into concrete with DX08

Vibration emission (a

h, HD): 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: chiselling function with side grip

Vibration emission (a

h, Cheq

): 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (a

h,D) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model DHR281

Work mode: hammer drilling into concrete

Vibration emission (a

h, HD): 9.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: hammer drilling into concrete with DX09

Vibration emission (a

h, HD): 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: chiselling function with side grip

Vibration emission (a

h, Cheq

): 9.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (a

h,D) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model DHR282

Work mode: hammer drilling into concrete

Vibration emission (a

h, HD): 9.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: hammer drilling into concrete with DX08

Vibration emission (a

h, HD): 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: chiselling function with side grip

Vibration emission (a

h, Cheq

): 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (a

h,D) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model DHR283

Work mode: hammer drilling into concrete

Vibration emission (a

h, HD): 9.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: hammer drilling into concrete with DX09

Vibration emission (a

h, HD): 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: chiselling function with side grip

Vibration emission (a

h, Cheq): 8.5 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: drilling into metal

Vibration emission (a

h,D) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s

NOTE:

The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

NOTE:

The declared vibration emission value may

also be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during actual

use of the power tool can differ from the declared emission

value depending on the ways in which the tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

Product specificaties

Merk:	Makita
Categorie:	Hamer
Model:	DHR281ZJ
Kleur van het product:	Black, Blue
Breedte:	Blablabla mm
Diepte:	404 mm
Hoogte:	232 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Soft grip:	Ja
Boorhouder:	SDS-plus
Ingebouwd licht:	Ja
Boren:	Ja
Klopboren:	Ja
Aanslag-energie:	2.9 J
Beitelen:	Ja
Type motor:	Borstelloze motor