Makita 6411 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Makita 6411 (28 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
GB
Drill Instruction Manual
F
Perceuse Manuel d’instructions
D
Bohrmaschine Betriebsanleitung
I
Trapano Istruzioni per l’uso
NL
Boormachine Gebruiksaanwijzing
E
Taladro Manual de instrucciones
P
Berbequim Manual de instruções
DK
Boremaskine Brugsanvisning
GR Τρυπάνι Οδηγίες χρήσεως
6411
6412
6413
2
1 2
3 4
6
A
B
4
5
2
3
1
3
ENGLISH
Explanation of general view
1 Chuck key
2 Ring
3 Sleeve
4 Switch trigger
5 Lock button
6 Reversing switch lever
SPECIFICATIONS
Model 6411 6412 6413
Capacities
Steel .........................................................................................10 mm 10 mm 10 mm
Wood ........................................................................................25 mm 25 mm 25 mm
No load speed (min1) .................................................................3,000 0 – 3,000 0 – 3,000
Overall length ..............................................................................228 mm 228 mm 234 mm
Net weight ....................................................................................1.3 kg 1.3 kg 1.3 kg
Safety class .................................................................................. /II /II /II
Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling in wood, metal and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
GEB001-6
DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tools by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool live”
and could give the operator an electric shock.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the drill bit or the workpiece imme-
diately after operation; they may be extremely
hot and could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
OPERATING INSTRUCTIONS
Installing or removing drill bit
CAUTION:
Always be sure that the tool is switched off and
unplugged before installing or removing the bit.
For 6411, 6412 (Fig. 1)
To install the bit, place it in the chuck as far as it will go.
Tighten the chuck by hand. Place the chuck key in each
of the three holes and tighten clockwise. Be sure to
tighten all three chuck holes evenly.
To remove the bit, turn the chuck key counterclockwise in
just one hole, then loosen the chuck by hand.
For 6413 (Fig. 2)
Hold the ring and turn the sleeve counterclockwise to
open the chuck jaws. Place the bit in the chuck as far as
it will go. Hold the ring firmly and turn the sleeve clock-
wise to tighten the chuck.
To remove the bit, hold the ring and turn the sleeve coun-
terclockwise.
Switch action (Fig. 3)
CAUTION:
Before plugging in the tool, always check to see the
switch trigger actuates properly and returns to the
“OFF” position when released.
For 6411
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For 6412, 6413
To start the tool, simply pull the switch trigger. Tool speed
is increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.


Product specificaties

Merk: Makita
Categorie: Schroefmachine
Model: 6411

Heb je hulp nodig?

Als je hulp nodig hebt met Makita 6411 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Schroefmachine Makita

Handleiding Schroefmachine

Nieuwste handleidingen voor Schroefmachine