Makita 6013BR Handleiding

Makita Schroefmachine 6013BR

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita 6013BR (32 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

Drill Instruction Manual

Perceuse Manuel d’Instructions

Bohrmaschine Betriebsanleitung

Trapano Istruzioni d’Uso

Boormachine Gebruiksaanwijzing

Taladro Manual de Instrucciones

Berbequim Manual de Instruço˜ es

Boremaskine Brugsanvisning

Borrmaskin Bruksanvisning

Boremaskin Bruksanvisning

Porakone Käyttöohje

GR ∆Ú˘¿ÓÈ √‰ËÁ›Â˜ ¯Ú‹ÛÂˆ˜

6013B

6013BR

1 2

3 4

5 6

ENGLISH Explanation of general view

1Tighten

2Chuck key

3Sleeve

4Ring

5Switch trigger

6Lock button

7Counterclockwise

8Clockwise

9Limit mark

0Brush holder cap

qScrewdriver

SPECIFICATIONS

Model 6013B 6013BR

Drilling capacities

Steel ...................................................................................................... 13 mm 13 mm

Wood .................................................................................................... 36 mm 36 mm

No load speed (RPM) ............................................................................. 550 550

Overall length .......................................................................................... 340 mm 340 mm

Net weight ............................................................................................... 2.8 kg 2.8 kg

•Due to the continuing program of research and

development, the speciﬁcations herein are subject

to change without prior notice.

•Note: Speciﬁcations may diﬀer from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed Safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Always be sure you have a ﬁrm footing. Be

sure no one is below when using the machine

in high locations.

2. Hold the machine ﬁrmly.

3. Keep hands away from rotating parts.

4. When drilling into walls, ﬂoors or wherever

‘‘live’’ electrical wires may be encountered. DO

NOT TOUCH ANY METAL PARTS OF THE

MACHINE! Hold the machine by the insulated

grasping surfaces to prevent electric shock if

you drill into a ‘‘live’’ wire.

5. Do not leave the machine running. Operate the

machine only when hand-held.

6. Do not touch the drill bit or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing top grip (auxiliary handle) (Fig. 1)

Screw the top grip on the machine securely.

Installing or removing drill bit

Important:

Always be sure that the machine is switched oﬀ and

unplugged before installing or removing the bit.

For machines with standard keyed chuck (Fig. 2)

To install the bit, place it in the chuck as far as it will

go. Tighten the chuck by hand. Place the chuck key in

each of the three holes and tighten clockwise. Be sure

to tighten all three chuck holes evenly.

To remove the bit, turn the chuck key counterclock-

wise in just one hole, then loosen the chuck by hand.

After using the chuck key, be sure to return it to the

original position.

For machines with keyless chuck (Fig. 3)

Hold the ring and turn the sleeve counterclockwise to

open the chuck jaws. Place the bit in the chuck as far

as it will go. Hold the ring ﬁrmly and turn the sleeve

clockwise to tighten the chuck. To remove the bit, hold

the ring and turn the sleeve counterclockwise.

Switch action

CAUTION:

•Before plugging in the machine, always check to

see that the switch trigger actuates properly and

returns to the ‘‘OFF’’ position when released.

•Change the direction of rotation only after the

machine comes to a complete stop. Changing it

before the machine stops may damage the

machine. (Model 6013BR only)

Model 6013B (Fig. 4)

To start the machine, simply pull the trigger. Release

the trigger to stop. For continuous operation, pull the

trigger and then push in the lock button. To stop the

machine from the locked position, pull the trigger fully,

then release it.

Product specificaties

Merk:	Makita
Categorie:	Schroefmachine
Model:	6013BR
Gewicht:	2900 g
Breedte:	80 mm
Diepte:	340 mm
Hoogte:	250 mm
Snoerlengte:	2.5 m
Stroombron:	AC
Input vermogen:	620 W
Stationair toerental (max):	550 RPM
Maximum koppel:	79 Nm
Boor diameter in staal (max):	13 mm
Boor diameter in hout (max):	36 mm
Boorhouder:	Sleutel