Magellan RoadMate 2240T-LM Handleiding

Magellan Navigator RoadMate 2240T-LM

Lees hieronder de 📖 handleiding in het Nederlandse voor Magellan RoadMate 2240T-LM (33 pagina's) in de categorie Navigator. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/33

User Manual

Magellan® RoadMate®

MiTAC Digital Corporation 471 El Camino Real, Santa Clara, CA 95050 USA www.magellanGPS.com

IMPORTANT SAFETY WARNINGS

Keep the Magellan RoadMate receiver safe

from extreme temperature conditions. For

example, do not leave it exposed to direct

sunlight for an extended period of time.

Take care when mounting the Magellan

RoadMate receiver in your vehicle, whether

using the windshield mount or other mounts,

that it does not obstruct the driver’s view of

the road, interfere with the operation of the

vehicle’s safety devices such as air bags, or

present a hazard to occupants of the vehicle

should the receiver be dislodged while driving.

It is your responsibility to assess the risks

associated with damage to your vehicle or

vehicle occupants as the result of your choices

in mounting the Magellan RoadMate receiver.

Temperature

The maximum operating temperature is 140°F

(60°C).

Battery

The battery in the Magellan RoadMate receiver

is rechargeable and should not be removed. In

the event that it should need to be replaced,

please contact Magellan Technical Support.

Charging the Magellan RoadMate

An optional AC adapter is available as an

accessory for your Magellan RoadMate. Use

of another type of AC adapter can result in

malfunction and/or possible fire hazard due to

battery overheating.

Only use the car charger approved for/

supplied with your Magellan RoadMate

receiver. Use of another type of car charger

will result in fire or electric shock.

For safety reasons, the battery in your

Magellan RoadMate receiver will stop charging

when the ambient temperature is less than

32°F (0°C) or more than 113°F (45°C).

It will take approximately 4 hours of charging

the Magellan RoadMate receiver through

the vehicle power adapter or optional AC

adapter to obtain a full battery charge. It is

The Magellan RoadMate receiver is a vehicle-

navigation aid designed to assist you in

arriving at your selected destinations. When

using the Magellan RoadMate receiver, these

safety rules must be followed to prevent

accidents that can result in injury or death to

yourself or others:

Please check the applicable regulations in your

state regarding windshield mounting. Certain

states prohibit the mounting of any items on

your windshield. Go to www.magellanGPS.

com for alternative mounting solutions.

When driving, the need to view the display is

minimal. Voice prompts will guide you to your

destination. The driver should enter data or

program the Magellan RoadMate receiver only

when the vehicle is stationary. Only a vehicle

passenger should enter data or program the

Magellan RoadMate receiver while the vehicle

is moving. Do not become distracted by the

receiver while driving, and always be fully

aware of all driving conditions.

It is your responsibility to comply with all traffic

laws and to use the Magellan RoadMate and

mounting options in such a manner that the

user is in compliance with applicable laws.

Roads, points of interest (POIs), business

and service locations may change over

time. As a result the database may contain

inaccuracy. Also, the database does not

include, analyse, process, consider, or reflect

any of the following: legal restrictions (such

as vehicle type, weight, height, width, load

and speed restrictions); road slope or gradient;

bridge height, width, weight or other limits;

population density; neighborhood quality

or safety; availability or proximity of police,

emergency rescue, medical or other assistance;

construction work zones or hazards; road or

lane closures; road, traffic or traffic facilities’

safety or condition; weather conditions;

pavement characteristics or conditions;

special events; traffic congestion. It is your

responsibility to disregard any unsafe,

hazardous or illegal route suggestions.

recommended that you charge the battery

initially for at least 2 hours.

Use only the charger approved for your

Magellan RoadMate receiver.

Estimated usage of the Magellan RoadMate on

battery power is approximately 2 hours.

Federal Communication Commission

Interference Statement

This equipment has been tested and found

to comply with the limits for class B digital

devices, in accordance with part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

FCC Caution:

Any changes or modifications

not expressly approved by the party

responsible for compliance could void the

user’s authority to operate this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. End users must follow the

specific operating instructions for satisfying RF

exposure compliance.

This transmitter must not be co-located or

operating in conjunction with any other

antenna or transmitter.

In order to maintain compliance with FCC

regulations, shielded cables must be used

with this equipment. Operation with non-

approved equipment or unshielded cables is

likely to result in interference to radio and TV

reception. The user is cautioned that changes

and modifications made to the equipment

without the approval of manufacturer could

void the user’s authority to operate this

equipment.

The Magellan RoadMate receiver must be

installed and operated at a distance no closer

then 8 inches (20 cm) from the user.

This Class B digital apparatus meets all

requirements of the Canadian Interference-

Causing Equipment Regulations.

IC statement

Operation is subject to the following two

conditions:

1. This device may not cause interference

and

2. This device must accept any interference,

including interference that may cause

undesired operation of the device.

IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC radiation

exposure limits established for an uncontrolled

environment. End users must follow the

specific operating instructions for satisfying RF

exposure compliance.

This transmitter must not be co-located or

operated in conjunction with any other

antenna or transmitter.

One or more claims of the following patents

may cover this product: U.S. patent No.

5,544,060, U.S. patent No. 5,654,892, U.S.

patent No. 5,832,408 and U.S. patent No.

5,987,375

The information provided in this document

is subject to change without notice.

Improvements and enhancements to the

product may occur without any formal

notification. Check the Magellan website

(www.magellanGPS.com/support) for product

updates and additional information.

are registered trademarks of MiTAC International Corporation. SmartDetour and OneTouch are

trademarks of MiTAC International Corporation and are used under license by MiTAC International

rights reserved.

protection and other intellectual property rights owned or licensed to Tele Atlas. Tele Atlas is an

authorized distributor of selected Statistics Canada computer files under Agreement number 6776.

The product includes information copied with permission from Canadian authorities, including

Geography Division, Statistics Canada, 2006 Road Network File (RNF), 92-500-XWE/XWF. The

incorporation of data sources from Statistics Canada within this product shall not be construed

as constituting an endorsement by Statistics Canada of such product. The use of this material is

subject to the terms of a License Agreement. You will be held liable for any unauthorized copying

or disclosure of this material.

All other products and brand names are trademarks of their respective holders.

No part of this user manual may be reproduced or transmitted in any form or by any means,

electronic or mechanical, including photocopying and recording, for any purpose other than the

purchaser’s personal use, without the prior written permission of MiTAC International Corporation.

The information provided in this document are correct at the time that it is created. MiTAC

International Corporation assumes no responsibility or liability for any errors or inaccuracies that

may appear in the contents of this User Manual.

112-0039-001 A

Contents

1 Magellan RoadMate GPS Receiver 1 ...........................................

Reset 2 .....................................................................................................................

2 Fundamentals ...........................................................................3

Powering on the Magellan RoadMate receiver 3 .................................................

Turning the Magellan RoadMate receiver On 3 ............................................

Turning the Magellan RoadMate receiver Off 3 ............................................

Battery Levels 3 .......................................................................................................

Viewing the Battery Level Indicator 3 ............................................................

Speaker Volume 3 ...................................................................................................

Changing the Volume from the Map Screen 3 ...............................................

Changing the Volume from Settings 3 ...........................................................

Setting Button Sounds On or Off 3 .................................................................

Setting Smart Volume On or Off 4 ..................................................................

Brightness 4 ............................................................................................................

Accessing the Brightness Control 4 ................................................................

Main Menu 4 ............................................................................................................

Accessing the Main Menu 4 ............................................................................

Keypad 5 ..................................................................................................................

Selecting From List 5 ........................................................................................

Selecting QWERTY or ABC Keyboard 5 ..........................................................

Notes on Entering Data 5 .......................................................................................

QuickSpell 6 .............................................................................................................

Smart City Search 6 .................................................................................................

3 Map Screen 7 ................................................................................

Setting the Map Options 8 ...............................................................................

Setting the Map Modes (2D or 3D) 8 ...............................................................

Setting Zoom Levels 8 ......................................................................................

Panning on the Map 8 ......................................................................................

Routing to a Panned Position 8 ......................................................................

Current Location Screen 9 ......................................................................................

Accessing the Current Location Screen 9 .......................................................

Saving Your Current Location to Your Address Book 9 ................................

Maneuver List (Itinerary).....................................................................................9

Accessing the Maneuver List 9 ........................................................................

Avoiding a Maneuver 9 ....................................................................................

Changing Route Options 10 ............................................................................

Volume 10 ................................................................................................................

Changing the Volume from the Map Screen 10 .............................................

4 OneTouch Menu 11 .....................................................................

Accessing the OneTouch Menu 11 ..................................................................

The Home Button 11 ...............................................................................................

Saving an Address to a OneTouch Icon 11 .....................................................

Changing the Address or Search of a OneTouch Icon 11 .............................

Saving a POI Search Criteria to a OneTouch Icon 12 .....................................

Setting a Route to a OneTouch Icon 12 ..........................................................

5 Selecting a Destination 13 ..........................................................

Creating a Destination to an Address 13 .......................................................

Tips on Entering Addresses Quickly 14 ................................................................

Intersections 14 .......................................................................................................

Creating a Destination to an Intersection 14 ................................................

City Centers 15 ........................................................................................................

Creating a Destination to a City Center 15 ....................................................

Previous Destinations 15 ........................................................................................

Routing to a Previous Destination 15 .............................................................

Clearing the list of Previous Destinations 15 .................................................

iii

Address Book 15 .....................................................................................................

Saving a Destination to Your Address Book 15 .............................................

Accessing an Address in Your Address Book 16 ............................................

Routing to an Address in Your Address Book 16 ..........................................

6 Points of Interest (POI) 17 ...........................................................

Creating a Route to a POI by Category 17 ......................................................

Creating a Route to a POI by Name 17 ...........................................................

Creating a Route to a Highway Exit POI 18 ...................................................

7 Traveling on a Route 19 ..............................................................

Map Screen 19 .........................................................................................................

Maneuver List 19 .....................................................................................................

Accessing the Maneuver List 19 ......................................................................

Excluding a Maneuver 19 ................................................................................

Types of Routes 19 ..................................................................................................

Changing the Routing Method 19 ..................................................................

To Change the Default Routing Method 20 ..................................................

Special Routing Functions 20 ................................................................................

Cancelling a Route 20 ......................................................................................

Detouring off a Route 20 .................................................................................

8 Settings ....................................................................................21

Accessing System Settings 21 ..........................................................................

Map Options 21 .......................................................................................................

Setting Auto Night Map Display 21 ................................................................

Setting Heading Up or North Up in 2D Mode 21 ...........................................

Assigning Visible POIs 21 ................................................................................

Setting Auto Zoom on Turns 21 ......................................................................

Setting Highway Lane Assist......................................................................21

Sound 22 ..................................................................................................................

Setting Volume from Settings 22 ....................................................................

Auto Power Off 24 ..................................................................................................

Setting Auto Power Off 24 ..............................................................................

Default System Settings 24 ....................................................................................

Restoring All Default System Settings 24 .......................................................

Product Information 24 ..........................................................................................

Viewing Product Information 24 ....................................................................

Magellan RoadMate GPS Receiver 1

The Magellan® RoadMate® receiver is a vehicle

navigation product that utilizes GPS signals

from satellites to calculate your precise location

and compute navigational information that

can be used to guide you to your destination.

Knowing its position and movement, it can

then overlay this information on detailed maps

to provide a visual representation of your

location.

With the Magellan RoadMate receiver you can:

•Save searches and addresses under the

OneTouch™ menu for fast, convenient

access to favorite destinations and searches.

•Store your home address and quickly get

routing details to your home.

•Enter and save addresses in your address

book that can be accessed at any time and

get routing information to that address.

•Route to an address that you enter using

the QuickSpell™ and Smart City search for

easy, errorless address entry.

•Route to any point of interest (POI) that

has been preloaded into your Magellan

RoadMate receiver.

•Create a route with multiple destinations.

Handy for business people who need

routing information to many destinations.

•Access the AAA TourBook® providing

ratings and descriptions on AAA-approved

places to stay, play, dine, and save.

•Access AAA Member Roadside Assistance™

information from the OneTouch menu.

•View POIs that are near exits ahead of

you on the highway. The Highway Exit

POIs function provides you with a list of

gas stations, restaurants, hotels and auto

repair shops located nearby exits you

are approaching while travelling on the

interstate.

•Customize your Magellan RoadMate

receiver to meet your needs using the

Settings menu.

The user interface for the Magellan RoadMate

receiver is easy and simple to follow once you

understand the basics. You may never need

to refer to this manual, but if you do, we have

tried to present it in a form that makes it easy

for you to access the function you are trying to

use and follow the steps provided.

The Magellan RoadMate receiver has a built-in

battery so, in most cases, you will be able to

follow these instructions while reading them

on your computer screen without plugging

the Magellan RoadMate receiver to the AC

power using an optional AC power adapter.

Note that a fully charged Magellan RoadMate

only has about 2 hours of battery life. You

should note that while indoors you may not

get strong enough satellite signals to compute

your location, so your location information

may not be updated. However, the power

of the GPS chipset installed in the Magellan

RoadMate receiver will pick up satellite signals

in some very demanding locations. You may

find that the Magellan RoadMate receiver is

computing a position, even indoors. Even

with the improved GPS chipset, the receiver

may not be able to always compute a fix

indoors. This is especially important to note

if you are in a garage or other overhanging

structure. If you find you are not getting strong

enough satellite signals while in a garage or

other structure, move to a location where

there is a clear view of the sky and you should

immediately see an improvement in signal

strength.

The Magellan RoadMate receiver includes

Voice Alerts (both prerecorded and Text-to-

Speech) for driving instructions.

This document is set up to be printed on 8.5” x 11” paper should you desire a printed version for

your reference.

3. Tap Sound.

4. Tap the check box for Button Sounds.

Check to have button sounds played,

unchecked to turn them off.

Setting Smart Volume On or Off

Smart Volume is a feature of the receiver that

changes the volume automatically as your

speed changes, compensating for road noise.

1. Access the Main Menu.

2. Tap the Settings icon .

3. Tap Sound.

4. Tap the check box for Smart Volume.

When checked, Smart Volume is on.

Brightness

Accessing the Brightness Control

1. Access the Main Menu.

2. Tap the Settings icon .

3. Tap System.

4. Tap Brightness.

5. Tap inside the brightness adjust bar to set

the desired brightness.

Note: On the Brightness Setting screen there

is a “Dim on Battery Power” option. When

checked, the Magellan RoadMate receiver

will reduce the brightness when operating

exclusively on battery power and you have not

used the touch screen for a few seconds. This

prolongs the battery life between charges.

Main Menu

The Main Menu screen is the center for all

available functions of the Magellan RoadMate

receiver. The Main Menu contains large, easy

to access icons for all the major functions.

Accessing the Main Menu

1. From the Map screen tap Menu.

Functions Available from the Main Menu

Address Enter an address as

a destination for you

route.

Points of

Interest

Select a Point of Interest

(POI) from the list of

preloaded locations as

a destination.

Previous List of the most resent

destinations that you

have gone to before

allowing you to quickly

select one to route to

again.

Intersection Create a route to the

intersection of two

streets.

City Center Create a route to the

geographical center of

a city.

Current

Location

Displays information

about your position

including the street

name, names of streets

forward and behind

you as well as the Lat/

Long information for

your position.

Back Access the Map screen.

•The more characters you enter, the smaller

the list of possible options is from which to

choose.

•When entering a street or city name it is

not necessary to use accented letters. You

can enter city and streets names using only

standard characters.

QuickSpell

Another feature the Magellan RoadMate

receiver uses to make entering cities and

streets easier is a feature known as QuickSpell.

As letters are entered for a city or street the

Quickspell feature checks the database for

cities or streets that begin with the letters

entered. Any letters that could not be used to

spell a city or street name are greyed out. This

provides quick and error-free city and street

name entry.

Smart City Search

The Magellan RoadMate receiver utilizes a

feature known as “Smart City Search”. Smart

City Search attempts to predict the city you are

looking for. This prediction is based upon two

factors; your position and cities you’ve gone to

before.

Whenever entering or searching on an

address the first screen displayed is the Enter

City Name keyboard.

As letters are entered, Quickspell checks the

database for cities beginning with the letters

entered. Keys that don’t spell a city in the

database are greyed out and Smart City Search

displays a suggested city in the text field.

If the city is correct, tap the button to

continue.

The button can be tapped to display

the list of cities that begin with the letters

entered.

Quickspell and Smart City Search makes

entering an address quick and easy with little

chance for errors.

Setting the Map Options

How your map is displayed can be customized

in Settings to your preferences.

1. From the Map screen, tap the MENU

button.

2. Tap the Settings Icon.

3. Tap Map button.

4. Use the Map Options screen to customize

what and how your map is to be

displayed.

Setting the Map Modes (2D or 3D)

The map is normally displayed in 3D mode

(perspective view) but you can set the map to

2D mode (top down view) if so desired.

1. From the Map screen, tap anywhere on

the map. Additional controls appear.

2. Tap 2D to switch the map to 2D mode

from 3D mode, or tap 3D to switch the

map to 3D mode from 2D mode.

3. Tap .

Setting Zoom Levels

Select the zoom level that best suits your

needs. Note that zoom levels are limited in 3D

mode. As you zoom out in 3D, the display will

switch to 2D at higher zoom levels.

1. Tap the ‘+’ or ‘-’ zoom level buttons at

the bottom of the Map screen to set the

desired zoom level.

Panning on the Map

1. While viewing the Map screen, slide your

finger or a stylus across the map.

2. The map screen changes to Pan mode.

3. When finished, tap and the map

returns to your current position.

Routing to a Panned Position

1. Pan the map until the location you wish

to route to is displayed.

2. Tap on the map at the point you want to

go to. A red push pin will be displayed

along with information about the point

chosen at the top of the screen.

3. Tap the GO button in the top left corner.

4. If an active route already exists, you will

need to define what to do with this new

route point:

Replace Destination:

the next destination

is cleared and replaced with the one

selected from the Pan screen.

Go There Now:

the selected location is

inserted in the route as an intermediate

destination before the next destination.

Changing Route Options

The options for how a route is computed can

be changed to Fastest Time, Shortest Distance,

Mostly Freeways, Least Use of Freeways.

1. Access the Maneuver List.

2. Tap on Route Options.

3. The four types of routes are displayed

with the computed time. A indicates

that the route will use a toll road.

4. Tap on the desired route option.

5. The GO screen is displayed. Tap GO to

begin routing.

Volume

The volume can be adjusted or muted from

the Map screen. (The volume can also be

adjusted from Settings > Sound.)

Changing the Volume from the Map

Screen

1. Tap the speaker icon . Additional controls

appear.

2. Tap on the Speaker button to mute

the volume, or tap the ‘+’ or ‘-’ icons to

change the volume levels.

3. Tap .

When muted the speaker icon on the

Map screen will appear with a red

diagonal line through it. Tap on the

speaker icon again ut unmute the

volume.

Product specificaties

Merk:	Magellan
Categorie:	Navigator
Model:	RoadMate 2240T-LM
Kleur van het product:	Zwart
Gewicht:	142 g
Breedte:	125 mm
Diepte:	14.8 mm
Hoogte:	77.4 mm
Gebruikershandleiding:	Ja
Bluetooth:	Nee
Beeldschermdiagonaal:	4.3 "
Touchscreen:	Ja
Vormfactor:	Vast
Ondersteuning voor plaatsing:	Horizontaal/Verticaal
Type stroombron:	Batterij/Accu
Compatibele geheugenkaarten:	MicroSD (TransFlash), SD
Aantal USB 2.0-poorten:	1
Ingebouwde luidsprekers:	Ja
Levensduur accu/batterij:	2 uur
Opslagmedia-type:	Flash
Ingebouwde camera:	Nee
Ondersteunt Windows:	Ja
Ondersteunt Mac-besturingssysteem:	Ja
Ondersteunde talen:	Engels
Antenne:	Ja
Bedrijfstemperatuur (T-T):	-10 - 70 °C
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Display met achtergrondverlichting:	Ja
Widescreen:	Ja
Water:	Nee
Sport (fitness, hardlopen):	Nee
Outdoor:	Nee
Geocaching:	Nee
Auto:	Ja
Vliegen:	Nee
Fiets:	Nee
Motorfiets:	Nee
Truck:	Nee
Camper/caravan:	Nee
Golf:	Nee
Snelheidslimiet:	Ja
Rijbaanbegeleiding:	Ja
Herkenningspunten in 3D:	Ja
Inclusief mappen:	Ja
Kaart dekking:	Canada, Puerto Rico, USA
Lifetime kaart updates:	Ja
Traffic Message Channel (TMC):	Ja
Live Traffic Message Channel (TMC):	Ja
Live service:	Ja
Auto re-route:	Ja
Gesproken straatnamen:	Ja
Adresingave:	City, Street
GPS-nauwkeurigheid - plaats:	5 m
Aantal nuttige plaatsen:	7000000