Mackie MDB-1A Handleiding

Mackie Niet gecategoriseerd MDB-1A

Lees hieronder de 📖 handleiding in het Nederlandse voor Mackie MDB-1A (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

O W N E R ’ S M A N U A L

™

INPUT

PAD

0 dB

-15 dB

THRU

PAD PAD

THRU

INPUT

MERGE PAD

THRU

OFF

ON POWER

MDB Series Direct Boxes

Important Safety Instructions

.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers)

that produce heat.

Only use attachments/accessories speciﬁed by the

manufacturer.

10.

Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

11.

This apparatus shall not be exposed to dripping or splashing, and

no object ﬁlled with liquids, such as vases or beer glasses, shall

be placed on the apparatus.

12.

This device complies with Part 5 of the FCC Rules. Operation is

subject to the following two conditions: () this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

NOTE:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and the receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV

technician for help.

CAUTION:

Changes or modiﬁcations to this device not expressly

approved by LOUD Audio LLC could void the user's authority to

operate the equipment under FCC rules.

WARNING — To reduce the risk of ﬁre or electric shock,

do not expose this apparatus to rain or moisture.

3.

This device complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This device should be

installed and operated with minimum distance 20cm between

the radiator & your body.

4.

This apparatus does not exceed the Class A/Class B

(whichever is applicable) limits for radio noise emissions

from digital apparatus as set out in the radio interference

regulations of the Canadian Department of Communications.

ATTENTION

— Le présent appareil numérique n’émet pas de bruits

radioélectriques dépassant las limites applicables aux

appareils numériques de class A/de class B (selon le cas)

prescrites dans le réglement sur le brouillage radioélectrique

édicté par les ministere des communications du Canada.

5.

This device complies with Industry Canada licence-exempt RSS

standard(s).

Operation is subject to the following two conditions:

() this device may not cause interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie

Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes:

() l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

6.

Exposure to extremely high noise levels may cause permanent

hearing loss. Individuals vary considerably in susceptibility to

noise-induced hearing loss, but nearly everyone will lose some

hearing if exposed to suciently intense noise for a period of

time. The U.S. Government’s Occupational Safety and Health

Administration (OSHA) has speciﬁed the permissible noise

level exposures shown in the following chart.

According to OSHA, any exposure in excess of these

permissible limits could result in some hearing loss. To

ensure against potentially dangerous exposure to high sound

pressure levels, it is recommended that all persons exposed

to equipment capable of producing high sound pressure levels

use hearing protectors while the equipment is in operation.

Ear plugs or protectors in the ear canals or over the ears must

be worn when operating the equipment in order to prevent

permanent hearing loss if exposure is in excess of the limits set

forth here:

Duration, per

day in hours Sound Level dBA,

Slow Response Typical Example

8 90 Duo in small club

6 92

4 95 Subway Train

3 97

2 100 Very loud classical music

1.5 102

1 105 Ryan screaming at Troy about deadlines

0.5 110

0.25 or less 115 Loudest parts at a rock concert

Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE

directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and

electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due

to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product

will contribute to the eective usage of natural resources. For more information about where you can drop o your waste equipment for recycling, please

contact your local city oce, waste authority, or your household waste disposal service.

Owner’s Manual

Contents

Part No. SW1224 Rev. A 01/18

Features

MDB-1P Passive Direct Box

• Perfect for guitars, basses, and more for stage and studio

• High-impedance 1/4" input with Thru output

• Balanced male XLR output connector with Ground Lif

• Ultra-low noise and distortion

• -15dB pad ensures distortion-free performance when

connecting to high-output sources

• Built-Like-A-Tank™ construction

MDB-2P Stereo Passive Direct Box

• Perfect for stereo sources like keyboards and media

players

• High-impedance 1/4" inputs with Thru outputs

• Balanced XLR outputs with Ground Lif

• Ultra-low noise and distortion

• -15dB pads ensure distortion-free performance when

connecting to high-output sources

• Built-Like-A-Tank™ construction

MDB-1A Active Direct Box

• Active circuitry oers higher headroom for ultra-low

noise and distortion-free performance

• High-impedance 1/4" input with Thru output

• Balanced XLR output with Ground Lif

• Low Cut and Polarity switches

• Merge switch allows connection of stereo sources which

are then summed to mono at the output, perfect for stereo

sources like keyboards and media players

• -20dB pad ensures distortion-free performance

when connecting to high-level sources

• Powered via 48v Phantom Power

• Built-Like-A-Tank™ construction

Like us

Watch our dang videos

Important Safety Instructions 2 ........................................

Contents 3 ...........................................................................

Features 3 ............................................................................

Introduction 4 .....................................................................

How To Use This Manual 4 .................................................

Getting Started 4 ................................................................

Things To Remember 4 .......................................................

Hookup Diagrams 5 ............................................................

MDB Series Direct Boxes: Front Panel Features 8 ...........

1. Input Jacks 8 ............................................................

2. Thru Jacks 8 ............................................................

3. Pad Switch 8 ............................................................

4. Merge Switch [MDB-1A] 8 ......................................

MBS On / O Switches 8 ............................................

MDB Series Direct Boxes: Rear Panel Features 9 ............

5. XLR Output Jacks 9 ................................................

6. Ground Lif Switch 9 ...............................................

7. Low Cut Switch [MDB-1A] 9 ....................................

8. Polarity Switch [MDB-1A] 9 ...................................

Appendix A: Service Information 10 ..................................

Appendix B: Technical Information 11 ...............................

MDB Series Direct Boxes Dimensions 12 ...................

MDB Series Direct Boxes Block Diagram 13 ..............

Limited Warranty 14 ............................................................

Product specificaties

Merk:	Mackie
Categorie:	Niet gecategoriseerd
Model:	MDB-1A
Kleur van het product:	Zwart
Gewicht:	400 g
Breedte:	86 mm
Diepte:	147 mm
Hoogte:	38 mm
Soort:	Actieve direct box
Aantal:	1
Frequentiebereik:	20 - 20000 Hz
Spanning:	24-48 V
Beste gebruik:	Bass guitar, Guitar, Synthesizer
XLR out:	1
Synchronisatie ingangsimpedantie:	330000 Ohm
Output impedance:	150 Ohm