M-Audio Wizoo Darbuka Handleiding

M-Audio Niet gecategoriseerd Wizoo Darbuka

Lees hieronder de 📖 handleiding in het Nederlandse voor M-Audio Wizoo Darbuka (30 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 189 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/30

Darbuka • User Guide 4

English

Welcome to Darbuka

The overwhelming success of our ﬁrst virtual musician - the Virtual Guitarist – proved that there’s a huge

demand for intelligent music tools that put you in the producers’ rather than the musicians’ chair; tools that

produce professional, authentic tracks based on real performances from skilled musicians. Why waste a lot of

time trying to imitate a Darbuka player with a MIDI track and some multisamples? Why not just hire the best

guys for the job?

Thanks to the proprietary FlexGroove engine Wizoo’s Virtual percussionists deliver nothing less than real

performances recorded by real musicians, with you in full control. Everything from the groove, the arrangement,

the timing and the tempo to the mix is in your hands, ready to make your song special.

The grooves of “Darbuka” were performed by Suat Borazan and Mohamed Zaki, two of the best Middle-

Eastern percussion players in the world and deﬁnitely big stars in their countries. Whether you’re into Middle-

Eastern music or just want to add the ﬂavor to your tracks – these guys deliver with cultural credibility and

musical performances like nothing that was affordable for any of us – in the pre-Darbuka era that is.

Best regards,

System Requirements & Installation

System Requirements

< Minimum System Requirements PC

• Pentium® III 500 MHz or AMD7. (Pentium 4 / Athlon 1 GHz or faster recommended).

• 256 MB RAM.

• 2 GB free hard disk space.

• Windows® XP.

• VST 2.0 compatible host software.

• MIDI Interface.

• DVD-ROM drive for installation.

• Internet connection for software certiﬁcation.

< Minimum System Requirements Mac

• Power Macintosh® G3 500 MHz.

(G4 or faster recommended)

• 256 MB RAM.

• 2 GB free hard disk space.

• Mac® OS X Version 10.3.2 or higher.

• VST 2.0, AU or RTAS compatible host software.

• MIDI Interface.

• DVD-ROM drive for installation.

• Internet connection for software activation.

(The actual performance of virtual instruments depends on the performance of the computer you use.)

3 English

To install Darbuka on a PC:

1. Power up your computer and launch Windows XP.

2. Insert the Darbuka DVD into the computer’s DVD drive.

3. The installer should start automatically, simply follow the instructions on the screen.

If the installer does not start automatically, open the Explorer or the Desktop window and double-click the

Darbuka DVD icon.

To uninstall Darbuka on a PC:

1. Open the Control Panel of your windows system.

2. Double Click ‘Add or Remove Programs’.

3. Select ‘Darbuka’ from the list.

4. Click ‘Remove’ and follow the instructions.

To install Darbuka on a Macintosh:

1. Power up your computer launching Mac OS X.

2. Insert the Darbuka DVD into the computer’s DVD drive. If the installer does not start automatically

double-click the Darbuka DVD icon.

3. Double-click the Installer icon and follow the instructions on the screen.

4. If your host platform supports Audio Unit or RTAS formats, then run the appropriate additional installer.

To uninstall Darbuka on a Macintosh:

1. Delete the Darbuka Data folder /Library/Audio/Plug-Ins/VST/Wizoo/Darbuka Data/

If you have installed the Darbuka content somewhere else on your Macintosh and are not sure where, use

the OSX Find feature ([Command][F]) and search for ‘Darbuka Data’

and

2. delete whichever Plug-ins you have installed:

VST/Library/Audio/Plug-Ins/VST/Wizoo/Darbuka.vst•

Audio Unit/Library/Audio/Plug-Ins/Components/Darbuka.component•

RTAS/Library/Application Support/Digidesign/Plug-Ins/Darbuka.rtas•

Product Certiﬁcation

Product Certiﬁcation is a fast and easy process that certiﬁes your purchased Wizoo product for unlimited legal

use on your system. All Wizoo products – demo and full versions – require a certiﬁcation.

The certiﬁcation process is integrated into your Wizoo product and can be executed using a standard web

browser and email client – there is no need to install additional applications or hardware.

To certify your Wizoo product, proceed as follows:

1. Open your Wizoo plug-in in your host application (sequencer).

2. Click the “Setup” button on the user interface.

3. Enter the Product Certiﬁcation Code provided on the card inside the Darbuka box into he ﬁeld labelled

“Product Certiﬁcation”.

Now you have two options. If your music computer is connected to the internet, proceed with “On-line

Certiﬁcation”, if not refer to the “Off-line Certiﬁcation” instructions below.

Darbuka • User Guide 4

English

< On-line Certiﬁcation

1. Make sure you have established an internet connection.

2. Click the button “Certify Online”

3. The plug-in retrieves the Wizoo Certiﬁcation form from the server and opens it in your web browser.

4. Enter the required information into all ﬁelds if possible, at least ﬁll out the ones marked with an asterisk

(*). The #“Product Certiﬁcate”# ﬁeld will automatically get ﬁlled out by the certiﬁcation server.

5. Click the #“Submit”# button to send your certiﬁcation request. Your certiﬁcate will be emailed to the

address you provided.

6. Receive your email and double-click the ﬁle attached to it. Your Wizoo product will be certiﬁed and

enabled for permanent use. As a conﬁrmation, the “Product Certiﬁcation” ﬁeld in the Setup page will

read “Product certiﬁed ...”.

If your email gets received on a computer other than your music workstation, then please transfer the attached

ﬁle to your music computer and double-click it there to complete the certiﬁcation process.

< Off-line Certiﬁcation

If your music computer is not connected to the Internet, you can carry out certiﬁcation on any other computer

with an internet connection – e.g. your ofﬁce or home computer.

1. Click the button “Certify Off-line”.

2. Check your desktop folder for a html ﬁle named after the product. Transfer this ﬁle to your internet-

connected computer.

3. On your internet computer, establish a connection and double-click the html ﬁle. It will be opened in

your web browser and take you to the Certiﬁcation form on the Wizoo server.

4. Fill out all ﬁelds if possible, the ﬁelds marked with an asterisk are obligatory. The #“Product Certiﬁcate”#

ﬁeld will be ﬁlled out automatically.

5. Click the “Submit” button to complete your certiﬁcation request. Your certiﬁcate will be emailed to the

address you provided.

6. Open your email and transfer the attached ﬁle to the computer where the Wizoo product is installed.

7. Here, double-click the ﬁle to complete certiﬁcation. As a conﬁrmation, the “Product Certiﬁcation” ﬁeld in

the Setup page will read “Product certiﬁed ...”.

Demo Licences

Included on your product installer DVD you will ﬁnd other demo versions of our products. A demo version

allows you to test the full product over a period of 30 days.

To activate a Wizoo demo version simply follow the procedure described above but do not enter any Certiﬁcation

code in the Product Certiﬁcation dialog.

General Overview

Darbuka is a very easy to use yet sophisticated virtual percussion instrument that plays real Arabic and Middle

Eastern multi-track percussion recordings at any tempo, and gives you the freedom to edit numerous aspects

of every instrument’s performance and sound.

Let’s take a quick tour of Darbuka and check out the most important general features.

What Is A Style

A Style is a full authentic percussion arrangement, complete with up to fourteen individual Tracks, up to sixty-

one Patterns (or arrangements), ﬁlls, mixer settings and a lot of other important information. When you save

or load a Style you are basically saving or loading every parameter in Darbuka .

Product specificaties

Merk:	M-Audio
Categorie:	Niet gecategoriseerd
Model:	Wizoo Darbuka

Heb je hulp nodig?

Als je hulp nodig hebt met M-Audio Wizoo Darbuka stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd M-Audio

M-Audio Vocal Studio Pro Handleiding

18 November 2024

M-Audio SBX10 Handleiding

21 Juni 2023

M-Audio MidAir Handleiding

20 Juni 2023

M-Audio Delta 44 Handleiding

19 Juni 2023

M-Audio ProKeys 88sx Handleiding

19 Juni 2023

M-Audio Studiophile DX4 Handleiding

18 Juni 2023

M-Audio Solaris Handleiding

18 Juni 2023

M-Audio Firewire 1814 Handleiding

17 Juni 2023

M-Audio Revolution 7.1 Handleiding

17 Juni 2023

M-Audio X-Session UC-17 Handleiding

16 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec MGW Diamond-HX OG Handleiding

23 November 2024

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024