M-Audio Studiophile CX5 Handleiding

M-Audio Niet gecategoriseerd Studiophile CX5

Lees hieronder de šŸ“– handleiding in het Nederlandse voor M-Audio Studiophile CX5 (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
Studiophileā„¢
CX5
User Guide
English
1
English
Studiophile
TM
CX5 User Guide
1. Introduction
Thank you for choosing the M-Audio CX5 bi-ampliļ¬ed studio monitors. The CX line of
loudspeakers build on M-Audioā€™s legacy of high performance studio monitors and provide
accurate, high-resolution playback that is free of audible distortion and coloration. This
allows you to hear everything that is in your source recordings so that you can create better
mixes.
Even if you are experienced with recording and mixing, please take a moment to read
through this guide. It will give you valuable information about how to set up your CX
monitors and will help you get the most out of your new purchase.
2. Whatā€™s in the Box?
This package contains:
ļ€¼ Pair of CX5 studio monitors
ļ€¼ Pair of IEC power cables
ļ€¼ Printed acoustic frequency response plot for each speaker
ļ€¼ This User Guide
3. About CX Studio Monitors
Typical mass-market loudspeakers sound pleasing because their designs incorporate a
deliberately uneven, non-linear frequency response that artiļ¬cially enhances certain bass
and treble frequencies. While it may be quite enjoyable to hear ļ¬nished albums on such
speakers, actually mixing on this type of monitor is not recommended since such speakers
tend to ā€œsmooth overā€ problem areas and do not reveal everything that should be ļ¬xed
during a mix.
Unlike typical mass-market speakers, M-Audioā€™s CX line of bi-ampliļ¬ed studio monitors
have been designed to provide accurate, highly detailed, reliable playback that is free of
distortion or coloration. This is done by having a tightly integrated system in which the CX
drivers, internal electronics (ampliļ¬ers, crossover, etc.), and enclosure all work together
to provide accurate bass, smooth high-frequency transient response, and a highly linear
frequency response through the entire audible range of the speaker. This allows you to
hear everything in your recorded tracksā€”the good and the bad thingsā€”so that you can spot
and ļ¬x problems and ultimately create great mixes that ā€œtranslateā€ well to other speakers
and audio playback systems.
English
2
Note that the placement and
orientation of the CX monitors
within your studio is important
and correctly placed speakers will
result in improved imaging, clarity,
and overall performance. This
topic is covered in detail in the
ā€œSetting up CX Monitorsā€ section
of this guide.
Also note that the CX monitors
feature several switches that
help you contour the speaker
to your speciļ¬c studio. When
these switches are left in their
default positions, the CX monitor
will exhibit the response characteristics found on the printed acoustic frequency
response plot that ships with each speaker. These anechoic* measurements represent
performance of the speaker in an ā€œidealā€ environment similar to that found in a
high-end recording studio with carefully tuned acoustics. In the real world, however, the
acoustics of your speciļ¬c studio (or the placement of your speakers within the studio)
may cause your monitors to exhibit too little (or too much) bass, midrange, or treble.
To help compensate for this, the rear-panel switches contour the frequency response
of the speaker speciļ¬cally to your studio. These switches are covered in detail in the
ā€œAbout the Rear-Panel EQ Contour Switchesā€ section of this guide.
*About anechoic chambers:
An anechoic chamber is a room in which the
ļ¬‚oor, ceiling, and all walls are covered with
sound-absorbent acoustical wedges. These
wedges prevent sounds created within the room
from reļ¬‚ecting back and inļ¬‚uencing the acoustic
measurement of the loudspeaker.
Anechoic chambers are considered to be
acoustically ā€œneutralā€ spaces since the room itself
does not impart any kind of sound to an acoustical
source contained within the room. Because of
this, loudspeakers (including CX monitors) are
commonly measured and tuned in such rooms.
Itā€™s in the details:
Did you know the shape and materials of a speaker cabinet can greatly affect the overall
sound of a speaker?
Your CX monitors feature thick walls and a carefully placed internal brace to prevent the
speaker from resonating at low frequencies. This means that the speaker cabinet itself will
not ring along with the low frequency sounds in your mix (such as a kick drum or a bass).
This translates into more accurate bass response.
Furthermore, the rounded (ā€œradiusedā€) edges and contoured waveguide surrounding the
tweeter are not just cosmetic touches intended to improve the appearance of the speaker.
These features help spread high frequencies evenly around the room and widen the ā€œsweet
spotā€ between the two speakers.


Product specificaties

Merk: M-Audio
Categorie: Niet gecategoriseerd
Model: Studiophile CX5

Heb je hulp nodig?

Als je hulp nodig hebt met M-Audio Studiophile CX5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd M-Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd