M-Audio Pulsar Handleiding

M-Audio Niet gecategoriseerd Pulsar

Lees hieronder de 📖 handleiding in het Nederlandse voor M-Audio Pulsar (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 229 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

AUDIOPHILE 192 PCI

Pulsar

small-capsule

condenser microphone

care & usage

English

User Guide

English

Introduction

Thank you for purchasing the Pulsar microphone from M-Audio. Please take a few moments to familiarize

yourself with your new microphone by reading this guide.

Features

< Top-address cardioid instrument microphone

< 3/4” diameter 6-micron evaporated-gold diaphragm

< Solid brass body and capsule

< 20Hz-20kHz frequency response

< Class A FET electronics

< 3-pin XLR (phantom-powered)

< Includes soft case, pop ﬁlter, and hard mount

Important: Please ﬁll out and mail your warranty card for the Pulsar so that we may provide you with support

for your microphone.

Unpacking

The container for your microphone was carefully constructed for protection during shipping. Please save this

packaging for storage or traveling with your Pulsar microphone. If your box does not include the following items,

please contact your dealer immediately:

< < (1) M-Audio Pulsar microphone (1) hard mount

< < (1) soft case (1) pop ﬁlter

Connections and Phantom Power

The M-Audio Pulsar microphone outputs a balanced low-impedance signal. It is designed to be connected to the

mic-level inputs of a mixer channel or a dedicated high-quality preamp such as M-Audio’s DMP3 or TAMPA.

As with all condenser microphones, your Pulsar requires power in order to operate. You will need to connect

the Pulsar via XLR connection to a preamp or mixer channel input that supplies +48V phantom power. (Phantom

power shares the same XLR cable as the audio from the microphone). In order to avoid pops and surges that can

damage components like speakers and microphones, always perform the following steps (in the order listed)

when connecting the mic and/or cable:

1. Turn the volume/gain on your preamp and/or mixer all the way down.

2. Make sure that phantom power is turned off.

3. Connect the microphone via a high-quality XLR cable.

4. Turn on phantom power.

5. Slowly turn up the gain on your preamp and/or mixer.

Before disconnecting the mic and/or cable, repeat steps 1 and 2 (in the order listed).

Applications

The Pulsar’s clean electronics combine with an all-brass capsule to produce a smooth tone that makes it a great

instrument-recording microphone. Use it on acoustic instruments, wind instruments, as an overhead drum mic

or room ambience recording mic. When you’re ready to add more pro-quality microphones to your mic locker,

be sure to check out the increased vocal punch of the M-Audio Luna and the multi-pattern recording features of

the M-Audio Solaris microphone.

Cardioid Pattern

Cardioid is the most commonly used polar pattern engineered into microphones.

This design causes the back of the microphone to reject incoming sound, allowing the engineer to isolate the

signal source from other performance elements or background noise by just pointing the mic at the sound

source. The logo side of the microphone is the “live” side.

Pulsar Small-Capsule Condenser Microphone Care and Usage •

English

Care of Your Microphone

Here are a few tips for care of your Pulsar microphone:

< Never subject the Pulsar to physical shock.

< Always use a stand—and always use the included hard mount when securing to a stand.

< Always wipe the Pulsar exterior down with a soft dry cloth and return it to its case after each use to

prevent damage from dust.

< In the event that your Pulsar needs more extensive cleaning, lightly dampen a soft cloth with water or

mild household soap and clean the metal exterior, wiping it completely dry when ﬁnished. Never spray

a cleaning agent on the microphone itself, as the moisture can damage the unit.

< Avoid subjecting the Pulsar to any kind of moisture. In vocal applications, use a windscreen to protect the

diaphragm from breath condensation and saliva build-up.

< Never disassemble the Pulsar microphone. There are no user-serviceable parts inside.

< Always use top-quality cables in order to avoid electrical problems that may damage the microphones

electronics.

< Avoid temperature extremes above 95°F and below 50°F. In order to avoid harmful moisture condensation

on the diaphragm, allow the microphone to acclimate to room temperature before connection when

moving the microphone between outdoor and indoor environments.

Speciﬁcations

< Type: small diaphragm condenser

< Polar Pattern: cardioid

< Frequency Response: 20Hz – 20kHz

< Sensitivity: 13.8 mV/Pa (-37dBV re 1V/Pa)

< Max. SPL for 0.5% THD: 134dB

< Equivalent Noise Level: 17dB A-weighted

< Output Impedance: 200 Ω

< Recommended Load Impedance: > 1,000 Ω

< Preamp Topology: Class A FET, transformerless

< Power Requirement: 48V phantom power

< Connector: 3-pin male XLR

< Dimensions: 22mm (0.87”) dia,, 132 mm (5.20”) long

< Weight: 115 g (4.0 oz)

Warranty Terms and Registration

Warranty Terms

M-Audio warrants products to be free from defects in materials and workmanship, under normal use and

provided that the product is owned by the original, registered user. Visit www.m-audio.com/warranty for terms

and limitations applying to your speciﬁc product.

Warranty Registration

Thank you for registering your new M-Audio product. Doing so immediately both entitles you to full warranty

coverage and helps M-Audio develop and manufacture the ﬁnest quality products available. Register online at

www.m-audio.com/register to receive FREE product updates and for the chance to win FREE M-Audio gear.

• Pulsar Small-Capsule Condenser Microphone Care and Usage

Product specificaties

Merk:	M-Audio
Categorie:	Niet gecategoriseerd
Model:	Pulsar

Heb je hulp nodig?

Als je hulp nodig hebt met M-Audio Pulsar stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd M-Audio

M-Audio Vocal Studio Pro Handleiding

18 November 2024

M-Audio SBX10 Handleiding

21 Juni 2023

M-Audio MidAir Handleiding

20 Juni 2023

M-Audio Delta 44 Handleiding

19 Juni 2023

M-Audio ProKeys 88sx Handleiding

19 Juni 2023

M-Audio Studiophile DX4 Handleiding

18 Juni 2023

M-Audio Solaris Handleiding

18 Juni 2023

M-Audio Firewire 1814 Handleiding

17 Juni 2023

M-Audio Revolution 7.1 Handleiding

17 Juni 2023

M-Audio X-Session UC-17 Handleiding

16 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Kolcraft MLB Chicago Cubs Handleiding

26 November 2024

Kolcraft MLB New York Yankees Handleiding

26 November 2024

Kolcraft MLB San Francisco Giants Handleiding

26 November 2024

Kolcraft MLB St. Louis Cardinals Handleiding

26 November 2024

Nedis POCO106 Handleiding

26 November 2024

Nedis BTSM1GY Handleiding

26 November 2024

Turbosound TPOLEAJ-01 Handleiding

26 November 2024

Turbosound TSTAND-01 Handleiding

26 November 2024

IFM TAD981 Handleiding

26 November 2024

IFM TAD961 Handleiding

26 November 2024