Lorus YM92 Handleiding

Lorus Horloge YM92

Lees hieronder de 📖 handleiding in het Nederlandse voor Lorus YM92 (2 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
St opwat c h minute h and
1. Press buttonAfor 2 seconds to select the
stopwatch hand(s) to be adjusted. T he
selection of the hand(s) to be ajusted is
made in the following order by pressing
button A for 2 seconds.
* The selected hand(s) turn(s) a full circle.
2. Pre ss button B repeat edly to set the
selected stopwatch hand(s) to the 0
position.
* The hand moves quickly if button B is
kept pressed.
3. After all the adjustments are completed,
push the crown back in t o the normal
position in accordance with a time signal,
checking that the hour and minute hands
for time display indicate the current time.
S E T T I N G T H E D AT E
1. Pull out the crown to the first click.
2. Turn the crown clockwise until the desired
date appears.
3. Push t he crown back in to the normal
position.
Note: Do not set the date between 9:00 p.m.
and 1:00 a.m. Otherwise, the date may
not change properly.
Before setting the date, be sure to set the
time.
It is necessary to adjust the date at the end
of February and 30-day months.
Dat e
B
The stopwatch can measure up to 12 hours
in 1/20 second increments.
The measured time is indicated by the four
stopwatch hands that move independently
of the hands for time display.
When the measurement reaches 12 hours,
t he s t o p w a t c h a u t o m a t i c a l l y s t o p s
counting.
S T O P WAT C H
A: St ar t / St op
B: S pl it /
Spl i t r eleas e/
R es e t
S t opw at c h
1 /2 0 - s ec o nd
hand
S t opw at c h
s econd hand
St o pwat c h h ou r
hand
S t opw at c h
minu t e hand
[ Ex.: 2 hours, 30 minutes and 10.85 seconds ]
NREYM92C 8-2010
CAL. YM92,7T92 (RF8 SERIES)
C H A R A C T E R I S T I C S
1. Time: Indicated by the hour, minute and
small second hands.
2. Date: Displayed in numerals.
3. Stopwatch:
Measures up to 12 hours in
1/20 second increments.
Split time measurement
D I S P L AY A N D C R O W N O P E R AT I ON
a. N or mal posi t ion : Fr ee
b. Fir s t c l i c k : Dat e s e t t ing
c.Second clic k : T i me s et t i ng
Adjusting the stopwatch
hand p os i t i on
C r ow n
Ho u r h and
Smal l
s e co nd
hand
SETTING THE TIME AND ADJUSTING
T H E S T O P WAT C H H A N D P O S I T I O N
This watch is so designed that
1) time setting and
2) stopwatch hand position adjustment
are both made wit h t he crown at t he
second click position. Once the crown is
pulled out to the second click, be sure to
make the above adjustments at the same
time.
A
B
a b c
Dat e
St opwat c h h our h a nd
S t opw at c h
1/20-s ec ond hand
Minut e h and
C r ow n
S t opw at c h
s econd hand
Minut e h and
Ho u r h and
1) Time setting
Smal l
s econd hand
1. Pull out the crown to the second click when
the small second hand is at the 12 oclock
position.
* If the stopwatch is measuring or stopped,
it is automatically reset to 0.
2. Turn the crown to set the hour and minute
hands.
* It is recommended that the hands be set
to the time a few minutes ahead of the
current time, taking into consideration
t h e t i m e r e q u i r e d t o a d j u s t t h e
stopwatch hand position if necessary.
If the stopwatch hands are not in the 0
position, follow the procedure below to set
them to the 0 position.
S t opw at c h
1/20-s ec ond h and
A
B
S t opw at c h
s econd hand
S t opw at c h
hour h a nd St o pwat ch minu t e
hand
Notes:
1. When setting the hour hand, be sure to
check that AM/PM is correctly set. T he
wa t ch is so de si g ne d th at t he da t e
changes once in 24 hours.
2. W h e n s e t t i n g t h e m i n u t e ha nd , f i r s t
advance it 4 to 5 minutes ahead of the
desired time and then turn it back to the
exact minute.
2) Stopwatch hand position adjustment
S t opw at c h
hour and
min u t e hand s
S t opw at c h
1 /2 0 - s ec o nd
hand
Stopwatch
s e co nd
hand
S t ar t
ABAB B
F in i s h
t i me of
1 s t
competit or
2nd
competitor
f i ni s h es
F in i s h
t i me
of 2nd
comepetitor
Movement of the stopwatch 1/20-second
hand
A f t e r t h e s t o p w a t ch i s s t a r t e d, t he
stopwatch 1/20-second hand moves for
about 10 minutes and automatically stops
at the 0 position.
When the measurement is stopped or split
time is measured, it moves to indicate the
elapsed 1/20 seconds.
After the measurement is restarted or split
time is re le ased, the stopwat ch 1/20-
second hand moves for about 10 minutes
and stops automatically.
In the same manner, if the stopwatch is
stopped and restarted repeatedly or split
time is measured and released repeatedly,
the stopwatch 1/20-second hand moves
f o r a b o u t 1 0 m i n u t e s a n d s t o p s
automatically.
Battery life indicator
When the battery nears its end, the small
se c o n d ha n d m o v e s a t t wo -s e c o nd
intervals instead of normal one-second
intervals. In that case, have the battery
replaced wit h a ne w one as soon as
possible.
The watch remains accurate, however,
while the small second hand is moving at
two-second intervals.
Before using the stopwatch, be sure to
check that the crown is set at the normal
position and that the stopwatch hands are
reset to the 0 position.
* If the hands do not return to the 0
p o s i t io n , f o l l o w t h e pr o c e du r e i n
SETTING THE TIME AND ADJUSTING THE
STOPWATCH HAND POSITION.
Stopwatch operation
St ar t St op Reset
* R e s t a r t a n d s t o p o f
stopwatch can be repeated
by pressing button A.
S t ar t
* Measurement and release of
split time can be repeated
by pressing button B.
Standard measurement
A BA
Accumulated elapsed time measurement
Split time measurement
Split Split
R el e as e S t op
Sta rt S t op R est art Stop Res et
AB
R es e t
L U M I B R I T E WAT C H
If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are
made of environmentally friendly material,
and therefore, are harmless to human beings
and the environment.
Wit h a f u l l c ha r g e , L OR U S L U M IB RI T E
watches glow in the dark hours longer than
conventional luminous watches of this type.
If exposed to a light of more than 500 lux
(i.e., the brightness of a typical office) for
approximately 10 minutes, or direct sunlight
for 2 minutes, they will glow for hours.
Since LORUS LUMIBRITE watches emit the
light they store, the brightness will decrease
gradually over time. The length of time they
will glow may also differ slightly depending
on such factors as the brightness of and
distance from t he light source used to
charge the watch.
B AT T ER Y C H A N G E
The battery SEIKO SR927SW, Maxell SR927SW,
SONY SR927SW or EVEREADY 395, which powers
your watch, should last approximately 3 years.
However, because it is inserted at the factory,
the actual life of the battery once in your
possession may be less than the specified
period.
Be sure to replace the battery to prevent any
possible malfunction as soon as it runs down.
To replace the battery, we recommend taking
the watch to a local watch repair shop.
Note:
1. If the stopwatch is used for more than 3
hours a day, the battery life may be less
than the specified period.
2. After the battery is replaced with a new
one, set the time/calendar and adjust the
stopwatch hand position.
C A R E O F Y O U R L O R U S WAT C H
• BATTERY
CAUTION
Do not expose the old battery to fire
or recharge it. Keep it at a place
beyond the reach of children. If a
child swallows it, consult a doctor
immediately.
Measurement of two competitors
R es e t
WATER RESISTANT
* If your watch is 200 M/20 BAR, 100 M/10 BAR
or 50 M/5 BAR wat er re sist ant , it is so
indicated on the dial/case back.
Do not press or turn the crown when the
watch is wet.
If the watch is exposed to salt water, rinse
it in fresh water and then wipe it thoroughly
dry.
NO NO N O
YE S
YE S
YE S NO NO
YE S YE S NO
Condition
of u se
A c c i d e n t a l
c o n t a c t
wi t h w a t e r ,
su c h a s
s p l a s h es
a n d r a i n
S wi m m i n g
a n d t a ki n g
a s h owe r
S ki n
d i v i n g S cu b a
d i v i n g
Indication
on the dial/
case back
No
I nd ic a t i on
NO N O NO
YE S
W AT E R
R E SI S T A N T
W AT E R
R E SI S T A N T
(5 0 M / 5 BAR
)
W AT E R
R E SI S T A N T
10 0M / 10 BAR
or ab ove
(
NO
(
Caution:
Leather straps are not water resistant except
so indicated, even if the watch head is water
resistant.
ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly.
If not, shirt sleeves may be stained and those
with delicate skin may develop a rash. Please
wear the watch with some play to avoid any
possible allergic reaction. If you develop a
rash on your wrist, stop wearing and consult a
physician.
• MAGNETISM
Your watch will be adversely affected by
strong magnetism.Keep it away from close
contact with magnetic objects.
SHOCKS AND VIBRATIONS
Your watch may be worn for normal sports
activities, However, be careful not to drop it
or hit it on hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
a c c u r a c y m a y b e i n s u r e d a t n o r m a l
temperature.
S E R V I C E
When your LORUS watch requires repair or
sevicing, please see the enclosed WARRANTY/
GUARANTEE.
A B BA B
AA A
Pr int e d i n C hi na


Product specificaties

Merk: Lorus
Categorie: Horloge
Model: YM92

Heb je hulp nodig?

Als je hulp nodig hebt met Lorus YM92 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Lorus

Handleiding Horloge

Nieuwste handleidingen voor Horloge