Lorus Y719 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Lorus Y719 (4 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
■ CHARACTE R I S T ICS
1 . T i m e a n d c a l e n d a r :
•Hour, minutes, seconds, year, month, date
and day of the week.
• Fully automatic calendar: The calendar
adjusts automatically for odd and even
months including February of leap years.
•Tim e in d ic at ion : Changeover between
12- and 24-hour indications is possible.
2. S to p wa t c h : Measures up to 99 hours, 59
minutes and 59 seconds in 1 100 second⁄
in crements for the first hour and in 1-
second increments thereafter.
•S p l i t t i m e m e a s u r e m e n t
3 . Co u n t d ow n t i m e r : Up to 99 hours and
59 minutes can be set in minute increments.
•
After the set time is up, the timer counts
up the time up to 59 minutes and 59 seconds.
• The set time can be used repeatedly unless
canceled.
4 . D a i l y a l a r m : The alarm can be set to
ring on a 24-hour basis.
•
H ou rl y t im e s ig n a l: Can be set to ring
every hour on the hour with a single beep.
5 . Du a l t im e : The time of a different time
zone can be displayed.
6. Il l umina ting lig ht: The light illuminates
the display for easy viewing in the dark.
■ BU T T O NS AND D I S P L AY S
I MNSTRUCTION ANUAL
CAL. Y717 (RYZ SERIES)
CAL. Y718 (RCP SERIES)
CAL. Y719 (RE2 SERIES) CAL. Y737 (RZM SERIES)
NREY737C 05-00
*The design of the liquid crystal panel differs
depending on the calibre. The functions
and method of operation, however, are the
same for all the four calibres.
Day
PM
mark
SecondsHour Minutes
C
D
B
A
Date
AD
Day Date
B C
Hour Minutes
Seconds
PM
mark
With each press of button “A”, the selection of
the mode can be made in the following order:
STOPWATCH
m o d e
T IM E /C A L EN D A R
m o d e ➡
➡
➡
➡➡
A
➡
➡
➡
➡
➡
➡
➡
➡
➡
➡
AA
T I M E R
m o d e
D U A L T I M E
m o d e
➡
➡
➡
➡
➡
➡
➡
➡
➡
➡
A
A
A L A R M m od e
■ TIME /CAL E N DAR MODE
DateDay
C
D
B
A
Minutes SecondsHour
1. Press button “A” to show the TIME/CALENDAR
mode.
2. Pr ess button “A” for 2 to 3 sec on d s to
show the time/calendar setting display.
The second digits start flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “C”.
Seconds
→
Minutes
→
Hour
→
Year
↓
↑
Month
←
Date
←
12- or 24-hour indication
4. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button “D” pressed.
●S e c o n d s s e t t i n g
Press button “D” in accordance with a
time signal. The seconds are reset to
“00” and start immediately.
When the seconds count any number
from “30” to “59” and button “D” is pressed,
one minute is added and the seconds
are reset to “00”.
5. After all the adjustments are completed,
press button “A” to return to the TIME/
CALENDAR mode.
N o t e s :
1. When setting the hour digits in the 12-
hour indication, check that AM/PM is set
properly. Only “PM” mark is displayed.
For the AM setting, there is no indication.
In the 24-hour indication, “24” is displayed.
2. Once the year, month and date have been
set, the day of the week is set automatically.
3. If the watch is left untouched in the time/
ca lendar setting display w ith the digits
flashing, it will automatic a lly retu r n to
the TIME/CALENDAR mode in 2 to 3 minutes.
Sh ow in g th e ca l e n d ar d i sp l ay
•Press and hold button “C” in the TIME/
CALENDAR mode. While the button is
kept pressed, the year, month and date are
displayed.
C
Year
Date
Month
Sto p wa tch o p e ra tio n
■STOP WATCH M OD E
• The stopwatch can measure up to 99 hours,
59 minutes and 59 seconds.
•It measures in 1⁄100 second increments for
the first hour and in 1-second increments
thereafter.
Press button “A” to show the STOPWATCH
mode. “Chrono” is displayed first, and then
the STOPWATCH mode appears.
PM mark
C
D
B
A
Standard measurement
C
S t a r t
C
S t o p
D
R e s e t
Accumulated elapsed time measurement
** Restart and stop of the stopwatch can be
repeated by pressing button “C”.
C
S t a r t
C
S t o p
C
R e s t a r t
** C
S t o p
D
R e s e t
S p l i t t i m e m e a s u r e m e n t
C
D
B
A
Split time
Accumulated
elapsed time
C
S t a r t
D
S p l i t 1
D
S p l i t 2
** C
S t o p
D
R e s e t
** Split time can be measured repeatedly by
pressing button “D”.
■TIMER M ODE
• Up to 99 hours and 59 minutes can be set in
minute increments.
• After the set time is up, the timer counts
up the time up to 59 minutes and 59 seconds.
• The set time can be used repeatedly unless
canceled.
Press button “A” to show the TIMER mode.
“TIMER” is displayed first, and then the TIMER
mode appears.
C
D
B
A
Current
time
Ti me r s e t tin g
1. Pr ess button “A” for 2 to 3 sec on d s to
show the timer setting display. The hour
digits start flashing.
2. Press button “C” to select the digits to be
adjusted (flashing).
Minutes
→
Hour
3. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits move quickly by keeping
button “D” pressed.
4.
After all the adjustments are completed, press
button “A” to return to the TIMER mode
.
* If the watch is left untouched in the timer
setting display with the digits flashing,
it will automatically return to the TIMER
mode in 2 to 3 minutes.
↑
Set time
C
S t a r t
C
S t o p
C
R e s t a r t
Time-up
* Warning
sound
beeps.
**
C
S t o p
** Restart and stop of the timer
can be repeated by pressing button
“C”.
* When the set time is up, a warning
sound beeps for 20 seconds. To
stop it manually, press any of
the buttons.
Ti me r o p e ra t io n
Press the buttons in the following order.
D
R e s e t
N o t e s :
1. Afte r th e se t time is up, th e
timer counts up the time up to
59 minutes and 59 seconds.
2. Once the timer is set, the set
time is retained and can be used
repeatedly unless it is readjusted.
Set
alarm time
C
DA
Alarm
mark
Hourly time
signal mark
Current time
1. Press button “A” to show the ALARM mode.
“ALARM” is displayed first, and then the
ALARM mode appears.
2. Pr ess button “A” for 2 to 3 sec on d s to
show the alarm setting display. The hour
digits (and “AM”/“PM” mark if the time is
set in the 12-hour indication) start flashing.
3. Press button “C” to select the digits to be
adjusted (flashing).
Minutes
→
Hour
↑
4. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits move quickly by keeping
button “D” pressed.
5.
After all the adjustments are completed, press
button “A” to return to the ALARM mode.
■ AL AR M MO D E
•The alarm can be set to ring on a 24-hour
basis.
N o t e s :
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. In the 24-hour indication, there is no
indication.
3. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the ALARM
mode in 2 to 3 minutes.
Engag ement/disengagement o f the alarm
& turning on/off of the hourly time signal
•
With each press of button “C” in the ALARM
mode, the alarm and hourly time signal are
engaged and disengaged in the following order.
Alarm engaged
Hourly time signal engaged
Both engaged
Neither engaged
•At the designated time, the alarm rings for
20 seconds and stop. To stop it manually,
press any of the buttons.
• The alarm can be tested by keeping button
“C” pressed in the ALARM mode.
Ch e ck in g th e se t a la rm tim e
•Press and hold button “D” in the TIME/
CA L ENDA R mode. While the button is
kept pressed, the alarm time that has been
set is displayed.
N o t e :
When the alarm is disengaged, the set alarm
time will not be displayed.
■ DUAL TIME M ODE
•The time of a different time zone can be
displayed.
C
D
B
A
Main time
Dual time
1. Press button “A” to show the DUAL TIME
mode. “dUAL” is displayed first, and then
the DUAL TIME mode appears.
2. Pr ess button “A” for 2 to 3 sec on d s to
show the dual time setting display. The
hour digits (and “AM”/“PM” mark if the
time is set in the 12-hour indication) start
flashing.
3. Press button “C” to select the digits to be
adjusted (flashing).
Minutes
→
Hour
↑
4. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits move quickly by keeping
button “D” pressed.
5. After all the adjustments are completed,
press button “A” to return to the DUAL
TIME mode.
N o t e s :
1. When the time function is displayed in the
24-hour indication, the dual time is also
displayed in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. In the 24-hour indication, there is no
indication.
3. If the watch is left untouched in the dual
time setting display with the digits flashing,
it will automatically return to the DUAL
TIME mode in 2 to 3 minutes.
■NOTE ON UN USUA L D I S P L A Y
While in the time/calendar setting display
with the digits flashing, the display as shown
below will appear if both buttons “C” and “D”
are pressed successively in a short time. This
is not a malfunction. Press button “A”, “C” or
“D” to return to the TIME/CALENDAR mode,
and then set the time/calendar again.
C
DA
■LUMIBRIT E W A T C H
(dial, hands, buttons, case, bezel, strap, etc.)
✩If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are
made of environmentally friendly material,
and therefore, are harmless to human beings
and the environment.
• With a full charg e, LORUS LU MIBRITE
watches glow in the dark hours longer than
conventional luminous watches of this type.
If exposed to a light of more than 500 lux
(i.e., the brightness of a typical office) for
approximately 10 minutes, or direct sunlight
for 2 minutes, they will glow for hours.
• Since LORUS LUMIBRITE watches emit
the light they store, the brightness w ill
decrease gradually over time. The length
of time they will glow may also differ slightly
depending on such factors as the brightness
of and distance from the light source used
to charge the watch.
Product specificaties
Merk: | Lorus |
Categorie: | Horloge |
Model: | Y719 |
Heb je hulp nodig?
Als je hulp nodig hebt met Lorus Y719 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Horloge Lorus
19 Maart 2023
19 Maart 2023
8 Juli 2023
19 Maart 2023
6 Juli 2023
2 Juli 2023
1 Juli 2023
1 Juli 2023
29 Juni 2023
29 Juni 2023
Handleiding Horloge
- Horloge Braun
- Horloge IKEA
- Horloge Casio
- Horloge Epson
- Horloge Huawei
- Horloge Garmin
- Horloge Medion
- Horloge Topcom
- Horloge Ade
- Horloge Adidas
- Horloge Alessi
- Horloge Alpina
- Horloge Armani
- Horloge Ascot
- Horloge Asics
- Horloge Auriol
- Horloge Beper
- Horloge BML
- Horloge Boss
- Horloge Bruno Sohnle
- Horloge Bulova
- Horloge Bushnell
- Horloge Dakota
- Horloge Danish Design
- Horloge Davis
- Horloge Detomaso
- Horloge Diesel
- Horloge Digi-tech
- Horloge Easypix
- Horloge Ebel
- Horloge Edox
- Horloge ELYSEE
- Horloge ESQ
- Horloge ETA
- Horloge Eurochron
- Horloge Ferrari
- Horloge Festina
- Horloge Fila
- Horloge Fitbit
- Horloge Fossil
- Horloge Freestyle
- Horloge GC Watches
- Horloge Geemarc
- Horloge Guess
- Horloge Habitat
- Horloge Haffstreuner
- Horloge Hamilton
- Horloge Hugo Boss
- Horloge ICE Watch
- Horloge Inter-Quartz
- Horloge Invicta
- Horloge Irox
- Horloge Kalenji
- Horloge Karlsson
- Horloge Kogan
- Horloge Krontaler
- Horloge La Crosse
- Horloge Lacoste
- Horloge Lambretta
- Horloge Longines
- Horloge Lotus
- Horloge Lynx
- Horloge Marc Jacobs
- Horloge Marquant
- Horloge Meister Anker
- Horloge Michael Kors
- Horloge Misfit
- Horloge Mitsubishi
- Horloge Mondaine
- Horloge Movado
- Horloge Naitica
- Horloge Naviforce
- Horloge Nedis
- Horloge Nike
- Horloge Polar
- Horloge Pulsar
- Horloge Pyle
- Horloge QQ
- Horloge Rado
- Horloge Renkforce
- Horloge Rodania
- Horloge Rolex
- Horloge Ronda
- Horloge Seiko
- Horloge Sempre
- Horloge Sinn
- Horloge Skmei
- Horloge Slazenger
- Horloge Speedo
- Horloge Spinnaker
- Horloge Stuhrling
- Horloge Suunto
- Horloge Swatch
- Horloge Tauchmeister
- Horloge TCM
- Horloge Technaxx
- Horloge TFA
- Horloge Ticwatch
- Horloge Timer
- Horloge TimeStyle
- Horloge Timex
- Horloge Tissot
- Horloge Tommy Hilfiger
- Horloge TomTom
- Horloge Torgoen
- Horloge TW Steel
- Horloge Uri Minkoff
- Horloge Velleman
- Horloge Westfalia
- Horloge World Timer Chronograph
- Horloge Xonix
- Horloge Jaguar
- Horloge Junghans
- Horloge Just
- Horloge Olivia Burton
- Horloge Omega
- Horloge Oregon Scientific
- Horloge Orient
- Horloge Clas Ohlson
- Horloge Crivit
- Horloge Zenith
- Horloge Citizen
- Horloge Prologue
- Horloge Swiza
- Horloge Victorinox
- Horloge Bering
- Horloge Breitling
- Horloge Breo
- Horloge Brera
- Horloge Calypso
- Horloge Certina
- Horloge Christiaan Van Der Klaauw
- Horloge Christopher Ward
- Horloge Cover
- Horloge Daniel Steiger
- Horloge DMC
- Horloge Dugena
- Horloge Executive
- Horloge Fromanteel
- Horloge Gant
- Horloge Gc
- Horloge Girard-Perregaux
- Horloge Holzkern
- Horloge Hublot
- Horloge HYT
- Horloge IWC
- Horloge Jacques Lemans
- Horloge Klaus Kobec
- Horloge Lars Larsen
- Horloge Lucien Picard
- Horloge Luminox
- Horloge Maurice Lacroix
- Horloge Nautica
- Horloge Obaku
- Horloge Philip Watch
- Horloge Pilgrim
- Horloge Puma
- Horloge Shinola
- Horloge Skagen
- Horloge So & Co
- Horloge Tikkers
- Horloge Timberland
- Horloge TMI
- Horloge Triwa
- Horloge Tudor
- Horloge Versace
- Horloge WoodWatch
- Horloge Leff
- Horloge ETT
- Horloge Emporio Armani
- Horloge La Crosse Technology
- Horloge Spin Master
- Horloge Raketa
- Horloge Balmain
- Horloge Audemars Piguet
- Horloge Wonky Monkey
- Horloge Iron Annie
- Horloge Julie Julsen
- Horloge KRAEK
- Horloge X-WATCH
- Horloge PAUL HEWITT
- Horloge MICHELE
- Horloge Radley London
- Horloge PANERAI
- Horloge Zeppelin
- Horloge Hype
- Horloge Grand Seiko
Nieuwste handleidingen voor Horloge
14 December 2024
14 December 2024
14 December 2024
14 December 2024
14 December 2024
14 December 2024
14 December 2024
14 December 2024
14 December 2024
14 December 2024