Lorus W110 Handleiding

Lorus Horloge W110

Lees hieronder de 📖 handleiding in het Nederlandse voor Lorus W110 (4 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
1
SPORTS
CHARACTE R I S T ICS
1. Time /c a le n da r disp la y : Hour, minutes,
seconds, month, date and day of the week.
A u t oma t i c ca l e n d a r : Calendar adjusts
automatically for odd and even months
except February of leap years.
T im e indi c a t i on : Changeover between
12- and 24-hour indications is possible.
2 . S t o p w a t c h : Measures up to 30 hours
with 1 1,000 second readout./
Split time measurement is available.
3 . C o u n t d o w n t i m e r : Up to 99 hours and
59 minutes can be set in minutes.
4 . 3 - c h a n n e l a l a r m : The alarm can be set
to ring at three different times a day.
H ou r ly t im e s ign a l: Can be set to ring
every hour on the hour.
5. Du al t im e: Time of a different time zone
can be set and displayed.
6 . Illumin atin g lig ht: The light illuminates
the display in the dark.
HOW TO S E T THE TIME/CALEND AR
1. Press button A to show the time/calendar
display.
2. Press button B to show the time/calendar
setting display. The second digits start
flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button C.
HourSeconds
N o t e s :
1. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. Only P (PM) mark is displayed and
there is no indication for the AM setting.
In the 24-hour indication, 24 (24-hour
indication) mark is displayed.
Se c onds s ettin g
When the seconds digits are flashing, press
button D in accordance with a time signal.
The seconds are reset to “00” and start immediately.
When the seconds coun t any n umber from
30 to 59 and button D is pressed, one
minute is added and the seconds are immediately
reset to 00.
HOW TO USE THE STOPWAT C H
The stopwatch can measure up to 30 hours
in 1 1,000 seconds./
* Even if the stopwatch display is changed
to another while the measurement is in
progress, it continues counting properly.
After the stopwatch is used, however, be
sure to reset it as the battery energy is
consumed enormously to shorten the battery
life.
St opwa tc h O per ati on
S t a r t S t o p
R e s t a r t
S t o p
Accumulated elapsed time measurement
C C C
Press button A to show the stopwatch display.
CD
R e s e t
Accumulate repeatedly by
pressing button C.
2. If the watch is left untouched in the time/
calendar setting display with the digits
flashing, it will automatically return to the
time/calendar display in 2 minutes.
Seconds
MinutesHour
BUTTONS A ND DISPL AYS
Month
B
The selection of the display can be made in
the following order with each press of button
A.
Stopwatch
d i s p l a y
T i m e / c a l e n d a r
d i s p l a y
A
AA
T i m e r
d i s p l a y
AA
A l a r m
d i s p l a y
D u a l t i m e
d i s p l a y
Seconds
MinutesHour
BC
Month
P (PM)
mark
AD
Date
Day
C
D
A
B
Stopwatch
display
indicator
1/1,000 seconds
Hour Minutes Seconds
Hourly time
signal mark
P (PM)
mark Alarm mark
AD
C
Day
4. Press button D to set the flashing digits.
One digit is advanced with each press of
button D. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button D pressed.
5. After all the adjustments are completed,
press button B to return to the time/
calendar display.
12-/24-hour
indication Date Month
Minutes
Date
Display
indicators
Alarm
channel
Display
indicators
I MNSTRUCTION ANUAL
CAL. W110 (RBQ SERIES)
CAL. W111 (RB8 SERIES)
NREW110C 11-99
Measurement between two competitors
Split time measurement
S t a r t
CD C D
S p l it
S p l i t r e l e a s e
S t o p R e s e t
D
Finish (First runner)
CD C D D
Finish (Second runner)
S t a r t
F i n i s h t i m e
of 2 n d
c o m p e t i t o r
R e s e tS t o p
Measurement and release of split time
can be repeated by pressing button D”.
F i n i s h
t i me of 1 s t
c o m p e t i t o r
HOW TO SET THE 3-CHANNEL
ALARM
1. In the alarm display, selection of the alarm
channel or hourly time signal to be engaged
or disengaged is made in the following order
by pressing button C.
E ngag e men t/d i sen g a geme n t o f the
ala rm a nd h our ly t im e sig n al
The alarm can be set to ring at three different
times a day. Set the three alarm channels
one by one to desired alarm times.
1. Press button A to show the alarm display.
2. Selection of the alarm channel to be set is
made in the following order by pressing
button C.
* The alarm cannot be set in the hourly
time signal display.
Channel 1 Channel 2
MinutesHour
3. By pressing button D to set the digits in
the alarm setting display, the alarm mark
is displayed and the alarm is automatically
engaged.
4. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the alarm display
in 2 minutes.
N o t e s :
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that A (AM)/P
(PM) mark is correctly set. In the 24-hour
indication, 24 (24-hour indication) mark
is displayed.
2. [Alarm and hourly time signal engagement/
d i se n g a g e m e n t ]
With each press of button D, the alarm of
the selected channel or hourly time signal
is engaged and disengaged alternately.
* The alarm and hourly time signal can be
engaged and disengaged independently
of each other.
Indication of
the alarm
channel
Alarm/hourly
time signal
engaged
Alarm/hourly
time signal
disengaged
1
2
3
(Hourly time
signal)
The alarm rings at the designated time for
20 seconds and stops. To stop it manually,
press button A, B, C or D.
The alarm can be tested by keeping button
D pressed in the alarm display.
Hour
Hourly time
signal mark
Alarm mark
Alarm display
indicator
Alarm channel
HOW T O SET THE D UAL TIME
Time of a different time zone can be set and
displayed together with the time you have set
in HOW TO SET THE TIME/CALENDAR.
1. Press button A to show the dual time
display.
2. Press button B to show the dual time
setting display.
3. To set the digits, refer to HOW TO SET
THE TIME/CALENDAR.
1
B
AD
C
Minutes A (AM)/P
(PM) mark
A D
BC
Hour Minutes
A (AM)/P
(PM) mark
Dual time
display
indicator
Channel 3
Hourly time
signal display
3. Press button B to show the alarm setting
displa y. The hour digits (an d A/P
mark if the time is set in the 12-hour indication)
start flashing.
4. Press button C to select the digits to be
adjusted (flashing).
5. Press button D to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
6. After all the adjustments are completed,
press button B to return to the alarm
display.
* To set more than one alarm cha nnel,
follow the procedure above starting from
the step 2.
Channel 3
Hourly time
signal display
Channel 1 Channel 2
HOW TO USE THE COUNTDOWN
TIMER
The timer can be set up to 99 hours and 59
minutes in minutes.
LUMIBRIT E W A T C H
(dial, hands, buttons, case, bezel,
s t rap, e tc.)
If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are
made of environmentally friendly material,
and therefore, are harmless to human beings
and the environment.
With a full charge, LORUS LUMIBRITE
watches glow in the dark hours longer than
conventional luminous watches of this type.
If exposed to a light of more than 500 lux
(i.e., the brightness of a typical office) for
approximately 10 minutes, or direct sunlight
for 2 minutes, they will glow for hours.
S ince LORUS LUMIBRITE watches emit
the lig ht they store, the brightness will
decrease gradually over time. The length
of time they will glow may also differ slightly
depending on such factors as the brightness
of and distance from the light source used
to charge the watch.
ILL UM I N A T I N G LI GHT
When buttonD is pressed in th e time /
calendar or dual time display, the light illuminates
the display for easy viewing in the dark.
The remaining time is displayed in 1/10
seconds.
Tim e r s e ttin g
Tim e r o p e ra tio n
Press the button in the following order.
T i m e - u p
S t o p
R e s t a r t
Warning
sound
beeps
S t a r t
Restart and stop of the
timer can be repeated by
pressing button C.
* When the set time is up, a warning sound
beeps for 10 seconds. To stop it manually,
press button A, B, C or D.
CCC
2. Press button B to show the timer setting
display. The hour digits start flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button C.
4. Press button D to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
5. After all the adjustments are completed,
press buttonB to return to the timer
display.
N o t e : If the watch is left untouched in the
timer setting display with the digits
flashing, it will automatically return
to the timer display in 2 minutes.
1. Press button A to show the timer display.
Timer
display
indicator
ViViDiGi
ViViDiGi is a new type of liquid crystal panel
that makes possible various colors and high
contrast.
Excellent light reflection and transmission
make the display bright and clear.
Various color options are available.
Either the whole panel or the displayed
data only can be illuminated.
* Features vary in different models.
BATTERY CHANGE
The miniature lithium battery PANASONIC
CR2025,which powers your watch should last
approximately 5 years. However, because it
is inserted at the factory, the actual life of
the battery once in your possession may be
less than the specified period. Be sure to
replace the battery to prevent any possible
malfunc tion as soon as it runs down . To
replace the battery, w e recommend taking
the watch to a local watch repair shop.
N o t e : If the alarm is used for more than 3
seconds a day, the illuminating light
for more than 4 seconds a day and/or
the timer warning sound for more than
10 seconds a we ek , the battery life
may be less than the specified period.
Minutes SecondsHour
C
AD
B
Set time
Time
measured
1/10
seconds
D
MinutesHour


Product specificaties

Merk: Lorus
Categorie: Horloge
Model: W110

Heb je hulp nodig?

Als je hulp nodig hebt met Lorus W110 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Lorus

Handleiding Horloge

Nieuwste handleidingen voor Horloge