LOG Professional Beta Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor LOG Professional Beta (13 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
Operating Manual
BETA
Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logprofessional.com
BETA
Operating Manual
Digitally Optimized, Active High-End Studio Monitor
Congratulations on your purchase of a high-quality studio monitor from LOG Professional, manufactured under strict
quality and environmental standards. In order to make optimal use of all performance features, please read these
operating instructions carefully. We advise you to keep this manual for future reference.
Content
Delivered Items 1
Installation 1
Front 2
Back 2
Connecting Audio Sources 3
LED Indicator 4
DIP-Switch-Settings 4
Live-Mode 5
Digital Room Correction 5
Auto-Sleep-Mode 5
Positioning in the Room and Sound Optimization 6
Safety Instructions 7
Repair 7
Maintenance 7
Guarantee and Warranty 7
Disposal 8
Troubleshooting 8
Symbol Denition 9
Technical Data 10
Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logprofessinoal.com
BETA
Operating Manual
Delivered Items
1 x BETA studio monitor
1 x Power cord
Installation
- Before unpacking, make sure that you do not touch the loudspeaker chassis when carefully removing the
loudspeaker from the packaging.
- Before placing the BETA on a stand, table or mixer, make sure it can support the speaker‘s weight (approx. 7 kg).
Also make sure that the oor is sufciently large to prevent it from tipping over. It is important to pay attention to
the center of gravity.
- As an active studio monitor, the BETA requires its own power supply. To do this, connect your BETA studio monitor
to your power outlet using the supplied power plug. The power supply unit of the BETA accepts mains voltages
between 110 V and 230 V AC and mains frequencies between 50 and 60 Hz. There is no difference in the power
output of the amplier between 110 V and 230 V mains voltage. Make sure that the speaker is only switched on
after it has been connected to the power supply.
Important note: Only connect the loudspeaker to a socket with an earth connection!
Important note: The I/O switch serves as a separation point to de-energize the device.
- Do not place the speaker in direct sunlight or near/over a radiator (or other heat source).
- Leave at least 10 cm of space around the device to ensure adequate air circulation.
- Do not place objects lled with liquids or open ame sources on the device.
- The ambient conditions for this device are +5 to +40 °C with a relative humidity of up to 80%.


Product specificaties

Merk: LOG Professional
Categorie: Speaker
Model: Beta

Heb je hulp nodig?

Als je hulp nodig hebt met LOG Professional Beta stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker LOG Professional

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Creative

Creative Muvo 1C Handleiding

24 December 2024
Savio

Savio BS-03 Handleiding

24 December 2024
Adam

Adam S3V Handleiding

23 December 2024
Adam

Adam S5V Handleiding

23 December 2024
Adam

Adam S2V Handleiding

23 December 2024
Adam

Adam S3H Handleiding

23 December 2024
Adam

Adam S5H Handleiding

23 December 2024
Adam

Adam T5V Handleiding

23 December 2024
Adam

Adam F7 Handleiding

23 December 2024