Line 6 412VS-T Handleiding

Line 6 Receiver 412VS-T

Lees hieronder de 📖 handleiding in het Nederlandse voor Line 6 412VS-T (29 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/29
40-00-0136 Electrophonic Limited Edition available @ www.line6.com/manuals Rev B
Pilot’s Handbook
Manuel de Pilotage
Pilotenhandbuch
Pilotenhandboek
Manual del Piloto
412VS-T/B
2
Volume Levels
When using your Line 6 cab please be sure to exercise some common sense about volume levels. The Line
6 Spider Valve HD100, Vetta II HD and HD147, for instance, are high-powered heads, and they’ve got enough
juice to fry the speakers of a single 412VS if you really tried. This is especially true in stereo, since the full
power is driving each pair of speakers.
Warning Signs
If you see the speakers practically jump out through the speaker grille and they’re making rude noises, back
off on your amplifier’s master volume a wee bit to get things back into the realm of reasonable operational
levels. Also, understand that Line 6 can not be liable for replacement of speakers damaged by abuse. The
moral of the story is: feel free to crank it up, but do it with a bit of sense.
Care & Feeding
To keep your cabinet looking spanking new, you can use a damp cloth. If it was a particularly dirty gig, a non-
abrasive household cleaner such as Formula 409 or Fantastik should help you wipe away any extreme dirt.
Spray the cleaner onto a cloth and then use the cloth to clean the cabinet. Also, avoid prolonged exposure
to high temperature in direct sunlight (like under the rear windshield of your 1985 Toyota Supra hatchback).
Casters
Your 412VS includes removable casters. If you’re stacking a couple cabs on top of each other, make sure
and turn the casters on the top cab inward so they can fit into the bottom cab’s caster cups. To prevent cabinet
movement, you might also want to remove the casters from the bottom cab. 
Setting Up & Getting Help
See the diagrams on back as well as your amplifier’s User Manual for details on connections and operation.
You can run your cab mono at two different impdedances – 4 ohms or 16 ohms. Be sure you’ve set the switch
correctly and plugged into the correct jack. Also, be sure to use only heavy gauge unshielded cables for
speaker cabling (don’t use guitar cables). And, in the event that you’re mystified by some bit of esoterica we’ve
failed to cover in the written documentation, you can always reach out and touch our helpful Customer Support
staff through any of the following modern messaging means: Telephone (818) 575-3600 weekdays, 8am-5pm
Pacific Time. Surf www.line6.com. Email support@line6.com. Or, shoot us a note at Line 6 Customer Service,
26580 Agoura Road, Calabasas, CA 91302 USA.
3
Mono Head with Single 412VS
Connect cables and set switches as shown.
OR
C
SPEAKER OUTPUTS
USE CLASS 2 WIRING ONLY
16 OHM OUT
Connect speakers
to ONE output only
A, B or C.
NEVER OPERATE
WITHOUT SPEAKERS
CONNECTED.
(Use STANDBY to silence
speakers.)
B A
8 OHM single16 OHM pair OR
OR
OR
OROR
8 OHM OUT – CONNECT
C
4 OHM single8 OHM pair OR
OR
OR
OROR
4 OHM OUT – CONNECT
N222
LE /FT
MO ON
RIGHT
8 PER SIDE STEREO
OR
4 MONO (LEFT ONLY)
240 WAT MAX MONOTS
120 WATTS MAX PER SIDE STEREO
16 MONO (LEFT ONLY)
C
SPEAKER OUTPUTS
USE CLASS 2 WIRING ONLY
16 OHM OUT
Connect speakers
to ONE output only
A, B or C.
NEVER OPERATE
WITHOUT SPEAKERS
CONNECTED.
(Use STANDBY to silence
speakers.)
B A
8 OHM single16 OHM pair OR
OR
OR
OROR
8 OHM OUT – CONNECT
C
4 OHM single8 OHM pair OR
OR
OR
OROR
4 OHM OUT – CONNECT
N222
LE /FT
MONO
RIGHT
8 PER SIDE STEREO
OR
4 MONO (LEFT ONLY)
240 WAT MAX MONOTS 120 WATTS MAX PER SIDE STEREO
16 MONO (LEFT ONLY)
HD SPEAKER OUPUTS
HD SPEAKER OUPUTS


Product specificaties

Merk: Line 6
Categorie: Receiver
Model: 412VS-T

Heb je hulp nodig?

Als je hulp nodig hebt met Line 6 412VS-T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Line 6

Handleiding Receiver

Nieuwste handleidingen voor Receiver