Lindy 38219 Handleiding

Lindy AV extender 38219

Lees hieronder de 📖 handleiding in het Nederlandse voor Lindy 38219 (20 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

100m C6 HDMI 2.0 18G HDBaseT Extender

User Manual English

Benutzerhandbuch Deutsch

Manuel Utilisateur Français

Manuale Italiano

No. 38219

lindy.com

Tested to Comply with

FCC Standards

For Home and Oﬃce Use!

!!! IMPORTANT !!!

Only use a direct Cat.5e/6/7 cable connection between the

HDBaseT ports. Do not connect these ports to Network or

Ethernet equipment or any active components

!!!! WICHTIG !!!!

Verwenden Sie AUSSCHLIEßLICH eine direkte

Kabelverbindung zwischen den HDBaseT Anschlüssen

aber NIEMALS eine Netzwerkverbindung oder Ethernet

oder irgendwelche aktiven Komponenten

!!! ATTENTION !!!

N'utilisez qu'une connexion par câble Ethernet directe

entre les ports, sans passer par le réseau Ethernet, un

commutateur ou un quelconque périphérique connecté à

votre réseau !

!!! IMPORTANTE !!!

UTILIZZATE UN CAVO DEDICATO PER LA CONNESSIONE

TRA LE DUE UNITA', NON COLLEGATELO AD UNA RETE

ETHERNET O AD ALTRI COMPONENTI ATTIVI

User Manual English

Introduction

Thank you for purchasing the Lindy C6 HDMI 2.0 HDBaseT Extender. This product has been 18G

designed to provide trouble free, reliable operation. It beneﬁts from both a LINDY 2 year warranty and

free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for

future reference.

The C6 Li HDMI 2.0 18G HDBaseT Extender is a cost eﬀective, high performance solution for ndy

sending HDMI 2.0 signals over long distances, helping break the distance barrier for HDMI 2.0. Using a

single low cost Cat.6 cable to make the long distance connection, the HDMI Extender provides full

support for Ultra HD 4K 60Hz resolutions, including support for HDR10 (High Dynamic Range) and

HDCP 2.2, ensuring it meets the demands of contemporary AV installations. Support for the full range of

HDMI 2.0 deﬁned resolutions, which need up to 18Gbps of bandwidth, requires the Extender to use a

visually lossless compression, latency free technology, to enable the extension of signals via HDBaseT

Technology.

For added convenience and to enable discreet installation of the Receiver unit the Extender supports

PoC (Power over Cat.6) allowing a single power supply to be used with either the Transmitter or

Receiver to power both units.

Please Note: The quoted lengths and resolutions are possible with a direct connection between

Transmitter and Receiver using good quality Cat.6 solid core cable. Using a diﬀerent cable type, or

introducing wall plates, couplers or patch panels will result in a reduction of possible distances.

Package Contents

 HDMI 2.0 18G Transmitter

 HDMI 2.0 18G Receiver

 2 x IR Emitter Cables

 2 x IR Receiver Cables

 2 x Phoenix Block for RS232

 Mounting Kit

 24VDC 1A Power Adapter (EU, UK, US, AUS)

 This manual

Speciﬁcation

 HDMI 2.0 Gbps compliantb 18

 Extends HDMI 2.0b, 10/100 Ethernet, RS & Bi directional IR232 -

 Using solid core Cat.6 U/UTP or F/UTP cable supports resolutions up to:

 100m 1080p60 (4:4:4 12bit) / 3D 1080p30 (4:4:4 12bit)

 70m 4K 2160p60 (4:4:4 8bpc) / 1080p120 (4:4:4 8bit) / 1080p60 (4:4:4 16bit)

 Compatible with HDR10

 Support for HDCP 2.2/1.4, CEC and Lip Sync pass through-

 PoC (Power over Cat.6) requires only a single 24V 1A PSU to be attached

 Screw Type 5.5/2.1mm (Outer/inner) DC Socket

 Audio Pass-through of all HDMI audio formats including Dolby Atmos and DTS:X

 Bi-directional control of IR (30 60kHz) equipment via the extender-

 Maximum HDMI Cable length: Up to 4K 30Hz: 5m in/out, 4K 60Hz: 2m in/out

 ESD Protection: ± 8kV (air-gap discharge)

 Human Body Model: ± 4kV (contact discharge)

 Operating Temperature: 0°C - 40°C (32°F - 104°F)

 Storage Temperature: -20°C - 60°C (-4°F - 140°F)

 Relative Humidity: - 90% RH (Non-condensing) 20

 Metal Housing with mounting kit

 Dimensions (WxDxH): 157x90x20mm (6.18x3.54x0.79in) each unit

 Weight: 0.333kg (0.73lb) each unit

HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

Product specificaties

Merk:	Lindy
Categorie:	AV extender
Model:	38219
Kleur van het product:	Zwart
Breedte:	157 mm
Diepte:	90 mm
Hoogte:	20 mm
Gewicht verpakking:	1450 g
Breedte verpakking:	330 mm
Diepte verpakking:	243 mm
Hoogte verpakking:	72 mm
Soort:	AV-zender & ontvanger
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Ondersteunde video-modi:	1080p, 2160p
Maximum resolutie:	4096 x 2160 Pixels
Meegeleverde kabels:	IR
Inclusief AC-adapter:	Ja
Soort serieële aansluiting:	RS-232
Certificering:	REACH, FCC, CE
HDCP:	Ja
Aansluiting voor netstroomadapter:	Ja
3D:	Ja
Materiaal:	Metaal
HDMI versie:	2.0
Remote (IR) ingang:	2
Duurzaamheidscertificaten:	RoHS
Kleurdiepte:	16 Bit
Temperatuur bij opslag:	-20 - 60 °C
Video-ingang:	1
Output current:	1 A
Remote (IR) uitgang:	2
HDMI in:	2
RJ-45 uitgang ports:	1
Montagebeugels meegeleverd:	Ja
Video uit:	1
Bandbreedte:	18 Gbit/s
Aantal HDMI-uitgangen:	1
Receiver afmetingen (B x D x H):	157 x 90 x 20 mm
RJ-45 invoer ports:	1
Seriële poort(en):	1
HDBaseT-poort:	Ja
Maximaal bereik:	100 m
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 90 procent
Consumer Electronics Control (CEC)-ondersteuning:	Ja
Bedrijfsspanning (ontvanger):	24 V
Receiver gewicht:	333 g
Transmitter afmetingen (WxDxH):	157 x 90 x 20 mm
Transmitter gewicht:	333 g
HDCP- & EDID-omzeiling:	Ja
Ondersteundende kabel types:	Cat6
Electrostatic Discharge (ESD) bescherming:	8 kV
Bedrijfsspanning (zender):	24 V