Lindy 38137 Handleiding

Lindy AV extender 38137

Lees hieronder de 📖 handleiding in het Nederlandse voor Lindy 38137 (8 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

HDMI over Ethernet Extender Classic

User Manual English

Benutzerhandbuch Deutsch

Manuel tilisateur Français d’u

Manuale d’uso Italiano

No.38137 Extender (TX & RX)

No.38138 Receiver (RX only )

www.lindy.com

Tested to Comply with

FCC Standards

For Home and Oﬃce Use!

User Manual English

Introduction

Thank you for purchasing the LINDY HDMI over Ethernet Extender Classic. This HDMI Extender allows

you to connect one transmitter to one receiver unit via Cat.5e/6 cable connection or to distribute an HDMI

and IR remote control signal up to 1080p via Ethernet network to one or multiple displays for applications

such as digital signage, public display and large scale video presentations.

These extenders convert the HDMI signal to Ethernet broadcast signals. Network devices can be UPnP

used to distribute the signals. These extenders support 1- -1 1-to and to-many conﬁgurations, with the

requirement of using a separate network supporting UPnP broadcast protocol. Many- -many to

conﬁgurations can be arranged by separated networks.

Features

 HDMI and IR signal extension through Ethernet or direct Cat.5e/6 cable connection

 IR signal extension to control the HDMI source from the receiver side

 Ability to cascade up to 4 layers of network switches

 HDMI with HDCP support 480i up to 1080p60@8bit supported, not 3D capable ,

Package Contents

 No.38137: Extender (TX & RX) with IR TX & RX cables or

No.38138: Additional standalone Receiver (RX) with IR RX cable

 2 1x Multi Country Power Supply with adapters for EURO, US, UK, AUS/CN x/ AC

 This manual

Installation

1. Connect the HDMI display(s) to the Receiver(s) the HDMI source to the Transmitter using and

HDMI cable.

2. If required connect the IR TX cable to the Transmitter and the IR RX cable to the Receiver.

3. Connect the power supplies.

4. Connect your TX and RX Extenders. You may either use a 1- -1 RJ45 cable connection up to to

120m using Cat.6 or 100m using Cat.5e or use a 1-to-1 or 1- -many dedicated Fast Ethernet. to

5. Only use network switches that at least support port based VLAN management functions or use a

dedicated network with no other devices. UPnP broadcast protocol and Jumbo Frames must be

supported as well. IP addresses are not assigned - a DHCP server is not required.

Trouble Shooting

 Please only use HDTV/SDTV resolutions like 1080i/p@50/60Hz, 720p@50/60Hz, 576i/p@50Hz or

480i/p@60Hz. Other resolutions may not work.

 Please make sure all cable connections are seated well.

 Press the small Reset buttons near the RJ45 port.

 Yellow LED on RJ45 port is not lit: Network is not working or RJ45 cable is too long/faulty

 If you are not using a separated network, i.e. via port VLAN conﬁguration, your network may suﬀer

from extremely high traﬃc causing certain other network devices to fail. If this is the case please use

a dedicated network or contact an experienced network technician to set up your network

 If you cannot locate the problem and if it is NOT just a network problem please contact LINDY – –

support team. The worldwide contact information is available from the LINDY website.

Product specificaties

Merk:	Lindy
Categorie:	AV extender
Model:	38137
Kleur van het product:	Zwart
Soort:	AV-zender & ontvanger
LED-indicatoren:	Ja
Ondersteunde video-modi:	1080p
Maximum resolutie:	- Pixels
Aansluiting voor netstroomadapter:	Ja
Video-ingang:	1
HDMI in:	1
RJ-45 uitgang ports:	1
Video uit:	1
Aantal HDMI-uitgangen:	1
RJ-45 invoer ports:	1
Maximaal bereik:	120 m