Lindy 06104 Handleiding

Lindy Kabels voor pc's en randapparatuur 06104

Lees hieronder de 📖 handleiding in het Nederlandse voor Lindy 06104 (2 pagina's) in de categorie Kabels voor pc's en randapparatuur. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

USB Guitar Cable

User Manual English

LINDY No. 6104

www.lindy.com

Garageband Introductions

Thank you for purchasing the LINDY USB Guitar Cable. This

high performance guitar cable is the perfect for use with

Garageband on your Mac.

This manual provides you with a quick guide on how to set up

the LINDY USB Guitar Cable to record guitar using Garageband.

Requirements

What you need-

• Mac with Garageband installed

• LINDY USB Guitar Cable

• A guitar/bass

• Speakers/headphones

Installation

Firstly power up your Mac and plug the USB Guitar Cable into a

spare USB port. There is no need to install any special drivers.

To check that the cable is installed properly take a look at your

Sound settings in System Preferences:

Under the Input tab, make sure C-Media USB Audio Device is

highlighted. Next plug the cable into your guitar (you won’t hear

anything yet). Now adjust your Input Volume by setting it rather

low to avoid distortion. Once you are up and running, adjust the

settings while playing to get the perfect sound.

Next, turn your attention to the Output tab. Make sure that Built-

in Audio is highlighted, this can also be selected later:

You can now close the Sound window. Next, see your Audio

MIDI Setup. This is found in Applications>Utilities folder:

Select the Audio Devices tab. Make sure the default input is set

to C-Media USB Audio Device and that both Default Output

and System Output are set to Built-in Audio. You can now

close the Audio MIDI Setup folder.

Recording in Garageband

(Note: these instructions are for Garageband 2.02, layouts and

menus of other versions may be slightly different)

Launch Garageband and select the Preferences menu. This is

under the Garageband menu. Select Audio/MIDI and set the

settings to match those below:

Now close the Preferences window and create a new track in

Track>NewTrack. Make sure real instrument is selected and

guitars. Now select one of the example sounds, such as Classic

Rock. You MUST now select On next to the monitor option

otherwise you won’t hear anything you play. After this is selected

you should now hear something, even if it’s just noise.

Note: if you can’t hear anything you may have forgotten to turn

your guitar volume control up.

Now you can adjust and alter different amp simulation types,

effects settings etc.

Note: you will almost definitely want to tinker with the noise

settings as your pickups may be too loud, especially when using

distortion effects

Tip: for the best results keep an eye on your input levels

Latency

Note: latency occurs when there is a notable delay from the time

you hit the strings to the sound coming out of the speakers.

Tip: if you experience any Latency issues try this:

Press record, wait a few seconds and then press stop. Now try

playing again and the latency issues should be gone.

LINDY No. 6104

Edition August 2009

For Home and Office Use

Tested to Comply with FCC Standards

www.lindy.com

Product specificaties

Merk:	Lindy
Categorie:	Kabels voor pc's en randapparatuur
Model:	06104
Kleur van het product:	Zwart
Snoerlengte:	5 m
Aansluiting 1:	6.35mm
Aansluiting 2:	USB
Connector 1 vormfactor:	Recht
Connector 2 vormfactor:	Recht
Aansluiting 1 type:	Mannelijk
Aansluiting 2 type:	Mannelijk