Lincoln Electric Dress Out Kit Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Lincoln Electric Dress Out Kit (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 185 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
ABB Dress Out Kit Instruction Manual
ELECTRIC
SHOCK
CAN KILL
Turn off power to arm and feeder before installing dress
out kit. Verify that power is not available to wirefeeder.
Only qualied personnel should install Dress Out Kit.
1
2 3 4
5
6
7
8
9
11
12
13
14
15
15
28
15
20
21
23
10
17 18
24
19
25
Select your arm: K4253-IRB1660ID-B
ITEM Lincoln PN DESCRIPTION QTY
1M25433-1 Cable management bracket 1
2M25433-2 Wirefeeder bracket A-LH 1
3M25433-3 Wirefeeder bracket A-RH 1
4M25433-4 Rotation bracket 1
5M25433-5 Cable management bulkhead bracket B 1
6M25433-6 Cable holder base bracket 1
7M25433-7 Rear bracket 1
8M25433-15 WIREFEEDER HOLD BRACKET
(For 4R220) 1
9M25455-1 Block, Cable Holder Bracket,Top 4
10 M25431-22 52mm Conduit, PARAB Nylon 1.2 (m)
11 S30266-24 Conduit Clamp Insert 4
12 S30266-27 Conduit Clamp Housing 4
13 S30266-25 Rubber Holder, Axis 1 2
14 S30266-26 Block, Cable Holder 4
15 S30268-5 GAS FITTING 2
16 S30266-16 FEMALE CONNECTOR 2
17 M25437-1 GAS HOSE , (4.1M) 1
18 M25439-1 POWER CABLE WITH BEND,(4.6M) 1
19 M25440-1 CONTROL CABLE (ArcLink 14 pin) , (4.1m) 1
20 S16656-5 OUTPUT STUDS 1
21 M20007 OUTPUT STUDS COVER 2
22 S30267-1 HARDWARE KIT 1
23 S31896 WATER CONNECTION KIT 2
24 M25438-1 WATER HOSE(4M)-Red & Blue 1
25 S27052-2 LEAD GROMMET 1
26 IM10401 INSTRUCTION MENU 1
27 S30268-6 Female Connector 1
28 S30266-8 Gas Fitting Adaptor 1
Required Tools:
M2.5, M3, M5 and M6
Allen Wrenches
#2 Phillips Head Screwdriver
IM10401 September-17 ©Lincoln Global Inc. The graphics may not exactly reect the latest design.
M8, M10 & (2) M17 Wrenches
K4253-IRB1660ID-B
S30267-1 Hardware Kit Contents
Hardware AA
(Bracket B to Robot base)
M12x25 bolt 2
M12 spring washer 2
M12 at washer 2
Hardware AB
(control cables and water
hose for A&B Bracket )
M3x10 screws 8
M5×16 screw 4
M5 nut 4
M5 at washer 8
M5 Spring Washer 4
Water hose clamp 4
Hardware AC
(corrugated pipe to
bracket )
M8×20 bolt 7
M8 spring washer 7
M8 at washer 7
M6×45 bolt 4
M6 nut 4
M3x10 screws 8
M3 nut 8
Hardware AD
(Clamp bracket to Robot
base )
M6x16 bolt 8
M6 spring washer 8
M6 at washer 8
M8×20 bolt 7
M8 spring washer 7
M8 at washer 7
Hardware AE
(feeder brackets to arm
M8x20 bolt 6
M8 spring washer 8
M8 at washer 8
M8x25 bolt 2
M8x20 bolt(for 4R220) 2
M8 spring washer(for 4R220) 2
M8 at washer(for 4R220) 2
Hardware AF
(output stud and cover)
M4x18 bolt 2
M6x20 bolt 2
M6 nylock nut 2
M6 at washer 4
1/2 Bolt 1
1/2 at washer 2
1/2 Nut 1
1/2 Split Washer 2
2
Hardware AD
NOTES: all the steps have images associated with them.
You may have extra hardware once the install is com-
plete. It is recommended to chase the tapped holes on
the robot that will be used (there will be paint in the
holes).
Step 1
Assemble and install the base bulkhead.
Note: there are 2 directions that the cables can be mounted on the
base bulkhead; horizontal and vertical. Use the mounting option best
suited for the application.
a. Install the female connector (Item 27). See last page for
customer connection requirements.
b. Install the water connection kit (Item 23) using hardware
AB. Note the direction of mounting.
c. Press in two M6 nuts from hardware AC in the conduit
clamp housing (item 12) to make it easier when nishing
the clamp assembly later.
d. Install one part of the conduit clamp housing (Item 12)
using hardware AC.
e. Using hardware AF, install the output stud (Item 20) with
the M4 bolts, and the output stud cover (Item 21) with the
M6 bolts, washers and nut.
Horizontal Mounting Option
C
D
E
B
A
Vertical Mounting Option
Step 2
Assemble and install the Rotation Bracket.
a. Tap the holes in the robot using an M8-1.25 tap.
b. Install the Rotation Bracket (Item 4) using hardware AC.
c. Press in two M6 nuts from hardware AC in the conduit
clamp housing (item 12) to make it easier when nishing
the clamp assembly later.
d. Install one part of the conduit clamp housing (Item 12)
using hardware AC
C
D
A
B
Step 3
Install the Link 2 Cable Holder Bracket
a. Install the Link 2 Cable Holder Bracket (Item 6) with hard-
ware AD.
b. Install the hardware for the Block, Cable Holder Bracket
(item 9), hardware AD. Leave the bolts loose.
A
A
B
B
Hardware AA
Hardware AF
Hardware AC
Hardware AB
Hardware AC
3


Product specificaties

Merk: Lincoln Electric
Categorie: Niet gecategoriseerd
Model: Dress Out Kit

Heb je hulp nodig?

Als je hulp nodig hebt met Lincoln Electric Dress Out Kit stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Lincoln Electric

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd