Liebherr XRFSF5240 Handleiding

Liebherr Niet gecategoriseerd XRFSF5240

Lees hieronder de 📖 handleiding in het Nederlandse voor Liebherr XRFSF5240 (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 177 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

Installation Guide

Quality, Design and Innovation

home.liebherr.com/fridge-manuals

Contents

1 General safety instructions................................... 2

2 Installation conditions........................................... 2

2.1 Location.................................................................... 2

2.2 Building the appliance into kitchen units................... 3

2.3 Installing multiple appliances.................................... 3

2.4 Mains connection..................................................... 4

3 Installation dimensions......................................... 4

4 Ventilation requirements....................................... 4

5 Transporting the device......................................... 4

6 Unpacking the appliance...................................... 4

7 Mounting wall spacers.......................................... 4

8 Setting up the appliance....................................... 4

9 Setting up the appliance so that it is level.......... 5

10 After setting up...................................................... 5

11 Disposing of packaging........................................ 5

12 What the symbols mean........................................ 5

13 Door hinge change................................................ 6

13.1 Removing the door................................................... 6

13.2 Moving the upper bearing parts to the other side...... 8

13.3 Moving the lower bearing parts to the other side...... 8

13.4 Moving the door bearing parts to the other side....... 9

13.5 Fitting the door......................................................... 9

13.6 Aligning the door...................................................... 10

13.7 Fitting the covers...................................................... 10

14 Connecting device................................................. 10

The manufacturer is continually working on the further develop-

ment of all types and models. Please be aware that we reserve

the right to make changes to the shape, equipment and tech-

nology.

Symbol Explanation

Read instructions

Please read the information in these instructions

carefully to understand all of the benefits of your

new appliance.

Full instructions on the internet

The detailed instructions are available via

the QR code on the front of these instruc-

tions, at home.liebherr.com/fridge-manuals

or by entering the service number at

home.liebherr.com/fridge-manuals.

The service number can be found on the serial

tag

Fig. ()

Fig.

Example illustration

Check appliance

Check all parts for transport damage. If you have

any complaints, please contact your agent or

customer service.

Symbol Explanation

Differences

These instructions apply to a range of models, so

differences are possible. Sections that apply to

certain models only are marked with an asterisk

(*).

Instructions and results

Instructions are marked with a .

Results are marked with a .

Installation videos

You can find videos on installing appliances on

the Liebherr-Hausgeräte YouTube channel.

1 General safety instructions

-The socket must be easily accessible so that

the appliance can be quickly disconnected

from the supply in an emergency. It must be

outside the area of the rear of the appliance.

DANGER identifies a situation involving direct

danger which, if not obviated, may

result in death or severe bodily

injury.

WARNING identifies a dangerous situation

which, if not obviated, may result in

death or severe bodily injury.

CAUTION identifies a dangerous situation

which, if not obviated, may result in

minor or medium bodily injury.

NOTICE identifies a dangerous situation

which, if not obviated, may result in

damage to property.

Note identifies useful information and tips.

2 Installation conditions

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause

short circuits.

uThe appliance is designed for use in enclosed areas. Do

not operate the appliance outdoors or in areas where it is

exposed to splash water or damp conditions.

Intended use

-Install and use the appliance in indoor spaces only.

2.1 Location

WARNING

Leaking coolant and oil!

Fire. The coolant contained in the appliance is eco-friendly,

but also flammable. The oil contained in the appliance is flam-

mable. Escaping coolant and oil can ignite if the concentration

is high enough and in contact with an external heat source.

uDo not damage the pipelines of the coolant circuit and the

compressor.

General safety instructions

2 * Depending on model and options

-The best place for installation is a dry and well ventilated

room.

-If the appliance is installed in a very humid environment,

condensation can build up on the outside of the unit.

Always make sure the installation location is well ventilated .

-The more coolant there is in the appliance, the larger the

room in which the appliance is installed must be. If the room

is too small, any leak may create a flammable mixture of gas

and air. For each 8 g of coolant the installation space must

be at least 1 m3. Information on the coolant is on the model

plate inside the appliance.

2.1.1 Supporting floor

-The floor of the installation site must be horizontal and even.

-The surface supporting the appliance must be at the same

level as the surrounding floor.

2.1.2 Positioning

-Do not install the appliance in direct sunlight, next to an

oven, radiator or similar.

-Install the appliance with the rear panel up against the wall

and always use the supplied wall spacers (see below).

2.2 Building the appliance into kitchen

units

The appliance can be built into kitchen units.

If the appliance is set up with the hinges next to a wall

(4)

, the

distance between the appliance and the wall must be at least

13 mm.

Fig. 1

(1) Top cupboard* Door depth*(B)

(2) (C)Appliance* Ventilation cross section*

(3) (D)Kitchen cabinet* Distance to the back of

the appliance*

(4) Wall* Distance to the side of the(E)

appliance*

(A) Appliance depth*

A [mm] B [mm] C [cm2]D [mm] E [mm]

675 x65 min.300 min.50 min. 13

Appliances without handle / with recessed grip

Set up the appliance directly next to the kitchen cabinet

Fig. 1 (3)

At the back of the top cabinet, there must be an air outlet

shaft with the depth

Fig. 1 (D)

spanning the entire width of the

cabinet.

The ventilation cross-section

Fig. 1 (C)

must be maintained

under the ceiling.

If the appliance is set up with the hinges next to a wall

Fig. 1 (4)

, the distance between the appliance and the wall

must be at least 13 mm.

The appliance must protrude by the depth of the door

Fig. 1 (B)

from the front of the cabinet so that the doors can be opened

fully. The appliance may protrude further depending on the

depth of the kitchen cabinets

Fig. 1 (3)

and whether wall

spacers are used.

Ensure that the following conditions are met:

-Recess dimensions are adhered to .

-Ventilation requirements are complied with (see 4 Ventilation

requirements) .

2.3 Installing multiple appliances

NOTICE

Risk of damage due to condensate!

uDo not install the appliance directly alongside a further

refrigerator/freezer.

These appliances are designed for a variety of installation

options. Combine appliances only if the appliance is suitable.

The following table shows the installation options by model:

Installation

option

Model

Single All models

Side-by-side

(SBS)

Model names starting with .S...

See the supplied SBS installation guide for

the correct positioning.

Side-by-side

with a gap of

70 mm

between appli-

ances

Otherwise

condensation

will build up

between the

units.

All models without side wall heating

Fig. 2

Assemble the appliances together, following their specific

installation instructions.

Installation conditions

* Depending on model and options 3

Product specificaties

Merk:	Liebherr
Categorie:	Niet gecategoriseerd
Model:	XRFSF5240
Apparaatplaatsing:	Vrijstaand
Kleur van het product:	Zilver
Ijsmaker:	Ja
Nettocapaciteit vriezer:	262 l
Vriescapaciteit:	18 kg/24u
Draairichting deur verwisselbaar:	Ja
Nettocapaciteit koelkast:	398 l
No Frost (koelkast):	Ja
Koelkast binnenverlichting:	Ja
Soort lamp:	LED
Aantal planken koelkast:	7
Aantal groente lades:	2
Bewaartijd bij stroomuitval:	16 uur
Snelvriesfunctie:	Ja
Aantal planken vriezer:	7
Aantal sterren:	4*
Eierenrekje:	Ja
Flessenrek:	Ja
Super Cool functie:	Ja
Koelkastdeurvakken:	4
Vers zone compartiment:	Ja
Klimaatklasse:	SN-T
Automatische ontdooiing ( diepvries ):	Ja
Vriezer temperatuur (min):	-28 °C
Vriezer interieurverlichting:	Ja
Water dispenser:	Ja
Deur openingshoek:	115 °
Koelkast temperatuurbereik:	2 - 9 °C
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50-60 Hz
Energie-efficiëntieschaal:	A tot G
Geluidsemissieklasse (koelkast):	C
Geluidsniveau (koelkast):	38 dB
Deurscharnier (koelkast):	Rechts
Type bediening (koelkast):	Touch
Koelkastdisplay:	Ja
Alarm bij deur open (koelkast):	Ja
Energie-efficiëntieklasse (koelkast):	E
Aansluitingsvermogen (koelkast):	264.6 W
Jaarlijks energieverbruik (koelkast):	123 kWu
Breedte koelkast:	597 mm
Diepte koelkast:	675 mm
Hoogte koelkast:	1855 mm
Gewicht koelkast:	68100 g
Geluidsemissieklasse (vriezer):	C
Geluidsniveau (vriezer):	38 dB
Deurscharnier (vriezer):	Links
Type bediening (vriezer):	Touch
Vriezerdisplay:	Ja
Alarm bij deur open (vriezer):	Ja
Energie-efficiëntieklasse (vriezer):	E
Aansluitingsvermogen (vriezer):	264.6 W
Jaarlijks energieverbruik (vriezer):	248 kWu
Breedte vriezer:	597 mm
Diepte vriezer:	675 mm
Hoogte vriezer:	1855 mm
Gewicht vriezer:	72300 g
Vriezer-verpakkingsgewicht:	78400 g
Vriezer-verpakkingshoogte:	1929 mm
Vriezer-verpakkingsbreedte:	615 mm
Vriezer-verpakkingsdiepte:	767 mm
Displaytype vriezer:	LCD
Displaytype koelkast:	LCD
Ijsblokjeshouder:	Ja