Liberty Garden 704 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Liberty Garden 704 (2 pagina's) in de categorie Tuinslang. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Liberty Garden Model #704
This hose reel must be mounted to a solid masonry wall or to wall studs
TIP: Remember to use the correct size and quantity of hardware to properly support the
total weight of the unit. A standard 100' length of garden hose weighs approximately 15 lbs.
Filled with water the additional weight can exceed 20 lbs. The mounting hardware must be
able to support the combined weight of the unit, garden hose, plus water.
13.5 in.
15.5 in.
16 in.
Width includes handle
21.5 in.
• Position and hold your hose reel against the brick
masonry wall at a convenient height. Mark the position of
each suspension hole on the wall. Remove the hose reel.
• Using an electric drill, drill holes 9/16” in diameter and
1 5/8” deep at the marked positions on the wall.
• Insert the masonry wall anchors into the anchor sleeve.
Next, insert the anchor and sleeve into the drilled holes
until the steel sleeve is completely in the wall.
• Place the hose reel on the masonry wall anchors.
• Install a washer, lock washer, and nut over each wall
anchor and tighten securely.
INSTALLATION
NOTE: The following hardware (not included)
is recommended for installation.
NOTE: The following hardware (not included)
is recommended for installation.
• Position and hold your hose reel against the wood wall
at a convenient height. Mark the position of each
suspension hole on the wall. Remove the hose reel.
• Using an electric drill, drill pilot holes 1/4” in diameter
and 2 1/2” deep at the marked positions on the wall.
• Align the hose reel suspension holes with the pilot
holes.
• Attach the hose reel to the wall using the lag screws
with washers and tighten securely.
MOUNTING ON BRICK MASONRY WAL MOUNTING ON FLAT WOOD FRAME WALL L
(4) 7 or 8 mm x 60 mm masonry wall anchors
(5/16” x 2 1/2”)
(4) Anchor sleeves
(4) Washers
(4) Lock washers
(4) Nuts
(4) 7 or 8 mm lag screws with washers
(5/16” x 2 1/2”)
This hose reel MUST be mounted to a solid masonry wall or to wall studs
TIP: Remember to use the correct size and quantity of hardware to properly support the
total weight of the unit. A standard 100' length of garden hose weighs approximately 15 lbs.
Filled with water, the additional weight can exceed 20 lbs. The mounting hardware must be
able to support the combined weight of the unit, garden hose, plus water.
Mounting Hole
Size 10mm
Mounting Hole
Size 10mm
Product specificaties
| Merk: | Liberty Garden |
| Categorie: | Tuinslang |
| Model: | 704 |
Heb je hulp nodig?
Als je hulp nodig hebt met Liberty Garden 704 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Tuinslang Liberty Garden
16 November 2024
18 Juni 2023
18 Juni 2023
17 Juni 2023
6 Juni 2023
11 Mei 2023
Handleiding Tuinslang
- Tuinslang Karcher
- Tuinslang Brennenstuhl
- Tuinslang Eurom
- Tuinslang Florabest
- Tuinslang Fuxtec
- Tuinslang Gardena
- Tuinslang Holzmann
- Tuinslang Hozelock
- Tuinslang Silverline
- Tuinslang Vonroc
- Tuinslang Cocraft
- Tuinslang EMOS
- Tuinslang Hoselink
- Tuinslang Holman
- Tuinslang Hazet
- Tuinslang Aqua Joe
- Tuinslang Waldbeck
- Tuinslang Sani-Lav
- Tuinslang Coxreels
- Tuinslang TOOLMATE
- Tuinslang Reelcraft
- Tuinslang Agrati
Nieuwste handleidingen voor Tuinslang
5 December 2024
26 November 2024
25 November 2024
16 November 2024
16 November 2024
15 November 2024
25 Oktober 2024
26 Augustus 2024
26 Augustus 2024
26 Augustus 2024