LG SC2-1895ST Handleiding

LG Wasmachine SC2-1895ST

Lees hieronder de 📖 handleiding in het Nederlandse voor LG SC2-1895ST (48 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

www.lg.com

OWNER'S MANUAL

WASHING

MACHINE

Before beginning installation, read these instructions carefully.

This will simplify installation and ensure that the product is

installed correctly and safely. Leave these instructions near the

product after installation for future reference.

EN ENGLISH

F4J8TS(P)(0~9)W/S F4J8VS(P)(0~9)W/S SC2-1895ST

MFL69823131

TABLE OF CONTENTS This manual may contain images or

content different from the model you

purchased.

This manual is subject to revision by the

manufacturer.

SAFETY INSTRUCTIONS .................................................................3

IMPORTANT SAFETY INSTRUCTIONS 3 .................................................................

Disposal of Your Old Appliance 8 ...............................................................................

INSTALLATION ..................................................................................9

Parts 9 ........................................................................................................................

Accessories 9 .............................................................................................................

Specifications 10 ........................................................................................................

Installation Place Requirements ............................................................................ 11

Unpacking and Removing Transit Bolts 12 .................................................................

Using Anti-Slip Sheets (Optional) 13 ..........................................................................

Wooden Floors (Suspended Floors) 13 ......................................................................

Leveling the Appliance ...........................................................................................14

Connecting the Water Supply Hose.......................................................................14

Installing the Drain Hose 17 .......................................................................................

OPERATION .....................................................................................18

Using the Washing Machine 18 ..................................................................................

Sorting Laundry 19 .....................................................................................................

Adding Cleaning Products 20 .....................................................................................

Control Panel 23 .........................................................................................................

Programme Table ..................................................................................................24

Option Programme 29 ................................................................................................

SMART FUNCTIONS .......................................................................32

Using Smart ThinQ Application ..............................................................................32

Using Smart Diagnosis™ 34 ......................................................................................

MAINTENANCE ................................................................................35

Cleaning Your Washing Machine 35 ...........................................................................

Cleaning the Water Inlet Filter 35 ...............................................................................

Cleaning the Drain Pump Filter 36 .............................................................................

Cleaning the Dispenser Drawer 37 .............................................................................

Tub Clean (Optional) 37 .............................................................................................

Caution on Freezing During Winter 38 .......................................................................

TROUBLESHOOTING .....................................................................40

Diagnosing Problems 40 ............................................................................................

Error Messages 43 .....................................................................................................

WARRANTY ......................................................................................45

SAFETY INSTRUCTIONS

The following safety guidelines are intended to prevent

unforeseen risks or damage from unsafe or incorrect

operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’

as described below.

This symbol is displayed to indicate matters and

operations that can cause risk. Read the part with this

symbol carefully and follow the instructions in order to

avoid risk.

WARNING

This indicates that the failure to follow the instructions can

cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can

cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock,

injury or scalding to persons when using this product,

follow basic precautions, including the following:

Children in the Household

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be supervised

to ensure that they do not play with the appliance.

For use in Europe:

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in

a safe way and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance shall not

be made by children without supervision.

Children of less than 3 years should be kept away unless

continuously supervised.

Installation

•Never attempt to operate the appliance if it is damaged,

malfunctioning, partially disassembled, or has missing or broken

parts, including a damaged cord or plug.

•This appliance should only be transported by two or more people

holding the appliance securely.

•Do not install the appliance in a damp and dusty place. Do not

install or store the appliance in any outdoor area, or any area that

is subject to weathering conditions such as direct sunlight, wind,

or rain or temperatures below freezing.

•Tighten the drain hose to avoid separation.

•If the power cord is damaged or the hole of the socket outlet is

loose, do not use the power cord and contact an authorized

service centre.

•Do not plug multiple socket outlets, an extension power cable or

adapter with this appliance.

•This appliance must not be installed behind a lockable door, a

sliding door or a door with a hinge on the opposite side to that of

the appliance, in such a way that a full opening of the appliance

door is restricted.

•This appliance must be grounded. In the event of malfunction or

breakdown, grounding will reduce the risk of electric shock by

providing a path of least resistance for electric current.

•This appliance is equipped with a power cord having an

equipment-grounding conductor and a grounding power plug. The

power plug must be plugged into an appropriate socket outlet that

is installed and grounded in accordance with all local codes and

ordinances.

•Improper connection of the equipment-grounding conductor can

result in risk of electric shock. Check with a qualified electrician or

service personnel if you are in doubt as to whether the appliance

is properly grounded.

•Do not modify the power plug provided with the appliance. If it

does not fit the outlet, have a proper outlet installed by a qualified

electrician.

Operation

•Do not attempt to separate any panels or disassemble the

appliance. Do not apply any sharp objects to the control panel in

order to operate the appliance.

•Do not repair or replace any part of the appliance. All repairs and

servicing must be performed by qualified service personnel unless

specifically recommended in this Owner’s Manual. Use only

authorized factory parts.

•Do not put animals, such as pets into the appliance.

•Keep the area underneath and around the appliance free of

combustible materials such as lint, paper, rags, chemicals, etc.

•Do not leave the appliance door open. Children may hang on the

door or crawl inside the appliance, causing damage or injury.

•Use new hose or hose-set supplied with the appliance. Reusing

old hoses can cause a water leak and subsequent property

damage.

•Do not put in, wash or dry articles that have been cleaned in,

washed in, soaked in, or spotted with combustible or explosive

substances (such as waxes, wax removers, oil, paint, gasoline,

degreasers, drycleaning solvents, kerosene, petrol, spot removers,

turpentine, vegetable oil, cooking oil, acetone, alcohol, etc.).

Improper use can cause fire or explosion.

•Never reach into the appliance while it is operating. Wait until the

drum has completely stopped.

•In case of flood, disconnect the power plug and contact the LG

Electronics customer information centre.

•Do not push down the door excessively, when the appliance door

is open.

•Do not touch the door during a high temperature programme.

•Do not use flammable gas and combustible substances (benzene,

gasoline, thinner, petroleum, alcohol, etc.) near the appliance.

•If the drain hose or inlet hose is frozen during winter, use it only

after thawing.

•Keep all washing detergents, softener and bleach away from

children.

•Do not touch the power plug or the appliance controls with wet

hands.

•Do not bend the power cable excessively or place a heavy object

on it.

•Do not wash rugs, mats, shoes or pet blankets, or any other items

other than clothes or sheets, in this machine.

•This appliance must only be used for domestic household

purposes and should not be used in mobile applications.

•If there is a gas leakage (isobutane, propane, natural gas, etc.),

do not touch the appliance or power plug and ventilate the area

immediately.

Maintenance

•Securely plug the power plug in the socket outlet after completely

removing any moisture and dust.

•Disconnect the appliance from the power supply before cleaning

the appliance. Setting the controls to the OFF or stand by position

does not disconnect this appliance from the power supply.

•Do not spray water inside or outside the appliance to clean it.

•Never unplug the appliance by pulling on the power cable. Always

grip the power plug firmly and pull straight out from the socket

outlet.

Disposal

•Before discarding an old appliance, unplug it. Cut off the cable

directly behind the appliance to prevent misuse.

•Dispose of all packaging materials (such as plastic bags and

styrofoam) away from children. The packaging materials can

cause suffocation.

•Remove the door before disposing of or discarding this appliance

to avoid the danger of children or small animals getting trapped

inside.

Disposal of Your Old Appliance

•This crossed-out wheeled bin symbol indicates that waste electrical and electronic

products (WEEE) should be disposed of separately from the municipal waste stream.

•Old electrical products can contain hazardous substances so correct disposal of your

old appliance will help prevent potential negative consequences for the environment

and human health. Your old appliance may contain reusable parts that could be used

to repair other products, and other valuable materials that can be recycled to

conserve limited resources.

•You can take your appliance either to the shop where you purchased the product, or

contact your local government waste office for details of your nearest authorised

WEEE collection point. For the most up to date information for your country please

see www.lg.com/global/recycling.

INSTALLATION

Parts

Transit bolts

Power plug

Drawer

Control panel

Drum

Door

Drain hose

Drain plug

Drain pump filter

Cover cap (Location may

vary depending on products)

Adjustable feet

Accessories

Cold supply hose (1

EA) (Option: Hot (1

EA))

Spanner Caps for covering

transit bolt holes

(Optional)

Anti–slip sheets (2 EA)

(Optional)

Elbow bracket for

securing drain hose

(Optional)

Tie strap (Optional)

Specifications

Model SC2-1895ST

F4J*VS(P)(0~9)* F4J*TS(P)(0~9)*

Wash Capacity 9 kg 8 kg

Power Supply 220 - 240 V~, 50 Hz

Size 600 mm (W) x 560 mm (D) x 850 mm (H)

Product Weight 64 kg

Permissible Water pressure 0.1 - 1.0 MPa (1.0 - 10.0 kgf / cm²)

•Appearance and specifications may change without notice to improve the quality of the product.

•No further backflow protection required for connection to the water supply.

Installation Place

Requirements

Location

2 cm

0.5 cm

2 cm10 cm

Level floor : Allowable slope under the entire

appliance is 1°.

Power outlet : Must be within 1 meter of either

side of the location of the appliance.

•Do not overload the outlet with more than one

appliance.

Additional Clearance : For the wall, 10 cm:

rear/2 cm: right & left side

•Do not place or store laundry products on top

of the appliance at any time. These products

may damage the finish or controls.

WARNING

•The plug must be plugged into an appropriate

outlet that is properly installed and grounded

in accordance with all local codes and

ordinances.

Positioning

•Install the appliance on a flat hard floor.

•Make sure that air circulation around the

appliance is not impeded by carpets, rugs,

etc.

•Never try to correct any unevenness in the

floor with pieces of wood, cardboard or similar

materials under the appliance.

•If it is impossible to avoid positioning the

appliance next to a gas cooker or coal burning

stove, an insulation (85x60 cm) covered with

aluminum foil on the side facing the cooker or

stove must be inserted between the two

appliances.

•Do not install the appliance in rooms where

freezing temperatures may occur. Frozen

hoses may burst under pressure. The

reliability of the electronic control unit may be

impaired at temperatures below freezing point.

•Ensure that when the appliance is installed, it

is easily accessible for an engineer in the

event of a breakdown.

•With the appliance installed, adjust all four

feet using the transit bolt spanner provided to

ensure the appliance is stable, and a

clearance of approximately 5 mm is left

between the top of the appliance and the

underside of any worktop

•If the appliance is delivered in winter and

temperatures are below freezing, place the

appliance at room temperature for a few hours

before putting it into operation.

WARNING

•This equipment is not designed for maritime

use or for use in mobile installations such as

caravans, aircraft etc.

Electrical Connection

•Do not use an extension cord or double

adapter.

•Always unplug the appliance and turn off the

water supply after use.

•Connect the appliance to an earthed socket in

accordance with current wiring regulations.

•The appliance must be positioned so that the

plug is easily accessible.

•Repairs to the appliance must only be carried

out by qualified personnel. Repairs carried out

by inexperienced persons may cause injury or

serious malfunctioning. Contact your local

service centre.

Unpacking and Removing

Transit Bolts

1Lift the appliance off the foam base.

•After removing the carton and shipping

material, lift the appliance off the foam

base. Make sure the tub support comes

off with the base and is not stuck to the

bottom of the appliance.

•If you must lay the appliance down to

remove the carton base, always protect

the side of the appliance and lay it

carefully on its side. Do not lay the

appliance on its front or back.

Tub Support

(Optional)

Carton base

2Remove the bolt assemblies.

•Starting with the bottom two transit bolts,

use the spanner (included) to fully loosen

all transit bolts by turning them

counterclockwise. Remove the bolt

assemblies by wiggling them slightly while

pulling them out.

Transit

bolt

Retainer

3Install the hole caps.

•Locate the hole caps included in the

accessory pack or attached on the back.

Cap

NOTE

•Save the bolt assemblies for future use. To

prevent damage to internal components, Do

not transport the washing machine without

reinstalling the transit bolts.

•Failure to remove transit bolts and retainers

may cause severe vibration and noise, which

can lead to permanent damage to the washing

machine. The cord is secured to the back of

the washing machine with a transit bolt to help

prevent operation with transit bolts in place.

Using Anti-Slip Sheets

(Optional)

If you install the appliance on a slippery

surface, it may move because of excessive

vibration. Incorrect leveling may cause

malfunction through noise and vibration. If this

occurs, install the anti-slip sheets under the

leveling feet and adjust the level.

1Clean the floor to attach the anti-slip sheets.

•Use a dry rag to remove and clean foreign

objects and moisture. If moisture remains,

the anti-slip sheets may slip.

2Adjust the level after placing the appliance

in the installation area.

3Place the adhesive side of the anti-slip

sheets on the floor.

This side up

Adhesive side

4Ensure the appliance is level.

•Push or rock the top edges of the

appliance gently to make sure that the

appliance does not rock. If the appliance

rocks, level the appliance again.

NOTE

•You can obtain anti-slip sheets from the LG

Service Centre.

Wooden Floors (Suspended

Floors)

•Wooden floors are particularly susceptible to

vibration.

•To prevent vibration we recommend you place

rubber cups at least 15 mm thick of the each

foot of the appliance, secured to at least two

floor beams with screws.

Rubber Cup

•If possible install the appliance in one of the

corners of the room, where the floor is more

stable.

•Fit the rubber cups to reduce vibration.

NOTE

•Proper placement and leveling of the washing

machine will ensure long, regular, and reliable

operation.

•The washing machine must be 100%

horizontal and stand firmly in position.

•It must not ‘Seesaw’ across corners under the

load.

•The installation surface must be clean, free

from floor wax and other lubricant coatings.

•Do not let the feet of the washing machine get

wet. Failure to do so may cause vibration or

noise.

•You can obtain rubber cups

(p/no.4620ER4002B) from the LG Service

Centre.

Leveling the Appliance

If the floor is uneven, turn the adjustable feet as

required (Do not insert pieces of wood etc.

under the feet). Make sure that all four feet are

stable and resting on the floor and then check

that the appliance is perfectly level (Use a spirit

level).

•Once the appliance is level, tighten the lock

nuts up towards the base of the appliance. All

lock nuts must be tightened.

Raise Lower

Lock nut

Tighten all 4

lock nuts securely

Diagonal Check

•When pushing down the edges of the top

plate diagonally, the appliance should not

move up and down at all (check both

directions). If the appliance rocks when

pushing the machine top plate diagonally,

adjust the feet again.

NOTE

•Timber or suspended type flooring may

contribute to excessive vibration and

unbalance.

•If the washing machine is installed on a raised

platform, it must be securely fastened in order

to eliminate the risk of falling off.

Connecting the Water Supply

Hose

•Water pressure must be between 0.1 MPa

and 1.0 MPa (1.0‒10.0 kgf/cm2).

•Do not strip or crossthread when connecting

supply hose to the valve.

•If the water pressure is more than 1.0 MPa, a

decompression device should be installed.

•Periodically check the condition of the hose

and replace the hose if necessary.

Checking the Rubber Seal on the

Water Supply Hose

Two rubber seals are supplied with the water

inlet hoses. They are used for preventing water

leaks. Make sure the connection to taps is

sufficiently tight.

Hose connector

Rubber seal

Hose connector

Rubber seal

Connecting Hose to Water Tap

Connecting Screw-Type Hose to Tap

with Thread

Screw the hose connector onto the water

supply tap.

Connecting Screw-Type Hose to Tap

Without Thread

1Loose the four fixing screws.

Upper

connector

Rubber

seal

Fixing screw

2Remove the guide plate if the tap is too

large to fit the adapter.

Guide plate

3Push the adapter onto the end of the tap so

that the rubber seal forms a watertight

connection. Tighten the four fixing screws.

4Push the supply hose vertically upwards so

that the rubber seal within the hose can

adhere completely to the tap and then

tighten it by screwing it to the right.

Plate

Supply

hose

Connecting One Touch Type Hose to

Tap Without Thread

1Unscrew the adapter ring plate and loose

the four fixing screws.

Ring plate

2Remove the guide plate if the tap is too

large to fit the adapter.

Guide plate

3Push the adapter onto the end of the tap so

that the rubber seal forms a watertight

connection. Tighten the four fixing screws

and the adapter ring plate.

4Pull the connector latch plate down, push

the supply hose onto the adapter, and

release the connector latch plate. Make

sure the adapter locks into place.

Latch plate

NOTE

•Before connecting the supply hose to the

water tap, turn on the water tap to flush out

foreign substances (dirt, sand, sawdust, and

etc.) in the water lines. Let the water drain into

a bucket, and check the water temperature.

Connecting Hose to Appliance

Attach the hot water line to the hot water supply

on the back of the washer. Attach the cold

water line to the cold water supply on the back

of the washer.

Cold

water

supply

Hot water

supply

(optional)

NOTE

•After completing connection, if water leaks

from the hose, repeat the same steps. Use

the most conventional type of tap for the water

supply. In case the tap is square or too big,

remove the guide plate before inserting the

tap into the adaptor.

Using the Horizontal Tap

Horizontal tap

Extension tap

Square tap

Installing the Drain Hose

•The drain hose should not be placed higher

than 100 cm above the floor. Water in the

appliance may not drain or may drain slowly.

•Securing the drain hose correctly will protect

the floor from damage due to water leakage.

•If the drain hose is too long, do not force it

back into the appliance. This will cause

abnormal noise.

max. 100 cm

~ 100 cm

~ 145 cm

~ 105 cm

•When installing the drain hose to a sink,

secure it tightly with string.

•Securing the drain hose correctly will protect

the floor from damage due to water leakage.

max. 100 cm

Laundry tub Hose retainer

Tie strap

OPERATION

Using the Washing Machine

Before the first wash, select a washing

programme, allow the washing machine to wash

without clothing. This will remove residue and

water from the drum that may have been left

during manufacturing.

1Sort laundry and load items.

•Sort laundry by fabric type, soil level,

colour and load size as needed. Open the

door and load items into the washing

machine.

•Sort laundry by fabric type, soil level,

colour and load size as needed. Open the

door and load items into the washing

machine.

2Add cleaning products and/or detergent and

softener.

•Add the proper amount of detergent with

the detergent measuring cup to the

washing drum evenly.

•Add the proper amount of detergent to the

detergent dispenser drawer. If desired,

add bleach or fabric softener to the

appropriate areas of the dispenser.

3Turn on the washing machine.

•Press the Power button to turn on the

washing machine.

4Choose the desired washing cycle.

•Press the programme button repeatedly or

turn the cycle selector knob until the

desired cycle is selected.

•Press the cycle button repeatedly until the

desired cycle is selected.

•Press the cycle button repeatedly or turn

the cycle selector knob until the desired

cycle is selected.

5Begin cycle.

•Press the Start/Pause button to begin the

cycle. The washing machine will agitate

briefly without water to measure the

weight of the load. If the Start/Pause

button is not pressed within 5 minutes, the

washing machine will shut off and all

settings will be lost.

6End of cycle.

•When the cycle is finished, a melody will

sound. Immediately remove your clothing

from the washing machine to reduce

wrinkling. Check around the door seal

when removing the load for small items

that may be caught in the seal.

Sorting Laundry

1Look for a care label on your clothes.

•This will tell you about the fabric content

of your garment and how it should be

washed.

•Symbols on the care labels.

Wash temperature

Normal machine wash

Permanent press

Delicate

Hand wash

Do not wash

2Sorting laundry.

•To get the best results, sort clothes into

loads that can be washed with the same

wash cycle.

•Different fabrics need to be washed at

varying temperatures and spin speeds.

•Always sort dark colours from pale colours

and whites. Wash separately as dye and

lint transfer can occur causing

discolouration of white and pale garments.

If possible, do not wash heavily soiled

items with lightly soiled ones.

−Soil (Heavy, Normal, Light) :

Separate clothes according to amount of

soil.

−Colour (White, Lights, Darks):

Separate white fabrics from coloured

fabrics.

−Lint (Lint producers, Collectors):

Wash lint producers and lint collectors

separately.

3Caring before loading.

•Combine large and small items in a load.

Load large items first.

•Large items should not be more than half

the total wash load. Do not wash single

items. This may cause an unbalanced

load. Add one or two similar items.

•Check all pockets to make sure that they

are empty. Items such as nails, hair clips,

matches, pens, coins and keys can

damage both your washing machine and

your clothes.

•Close zippers, hooks and strings to make

sure that these items don’t snag on other

clothes.

•Pre-treat dirt and stains by brushing a

small amount of detergent dissolved water

onto stains to help lift dirt.

•Check the folds of the flexible gasket

(gray) and remove any small articles.

CAUTION

•Check inside the drum and remove any items

from a previous wash.

•Remove any clothing or items from the flexible

gasket to prevent clothing and gasket

damage.

Adding Cleaning Products

Detergent Dosage

•Detergent should be used according to the

instruction of the detergent manufacturer and

selected according to type, colour, soiling of

the fabric and washing temperature.

•If too much detergent is used, too many suds

can occur and this will result in poor washing

results or cause heavy load to the motor.

•If you wish to use liquid detergent follow the

guidelines provided by the detergent

manufacturer.

•You can pour liquid detergent directly into the

main detergent drawer if you are starting the

cycle immediately.

•Do not use liquid detergent if you are using

Time delay, or if you have selected Pre Wash,

as the liquid may harden.

•If too many suds occur, reduce the detergent

amount.

•Detergent usage may need to be adjusted for

water temperature, water hardness, size and

soil level of the load. For best results, avoid

oversudsing.

•Refer to the label of the clothes, before

choosing the detergent and water

temperature.

•When using the washing machine, use

designated detergent for each type of clothing

only:

−General powdered detergents for all types of

fabric

−Powdered detergents for delicate fabric

−Liquid detergents for all types of fabric or

designated detergents only for wool

•For better washing performance and

whitening, use detergent with the general

powdered bleach.

•Detergent is flushed from the dispenser at the

beginning of the cycle.

NOTE

•Do not let the detergent harden. Doing so may

lead to blockages, poor rinse performance or

odour.

•Full load : According to manufacturer’s

recommendation.

•Part load : 3/4 of the normal amount

•Minimum load : 1/2 of full load

Adding Detergent and Fabric

Softener

Adding Detergent

•Main wash only →

•Pre wash+Main wash →

NOTE

•Too much detergent, bleach or softener may

cause an overflow.

•Be sure to use the appropriate amount of

detergent.

Adding Fabric Softener

•Do not exceed the maximum fill line.

Overfilling can cause early dispensing of the

fabric softener, which may stain clothes. Close

the dispenser drawer slowly.

•Do not leave the fabric softener in the

detergent drawer for more than 2 days (Fabric

softener may harden).

•Softener will automatically be added during

the last rinse cycle.

•Do not open the drawer when water is being

supplied.

•Solvents (benzene, etc.) must not be used.

NOTE

•Do not pour fabric softener directly on the

clothes.

Adding Water Softener

•A water softener, such as anti-limescale (e.g.

Calgon) can be used to cut down on the use

of detergent in extremely hard water areas.

Dispense according to the amount specified

on the packaging. First add detergent and

then the water softener.

•Use the quantity of detergent required for soft

water.

Product specificaties

Merk:	LG
Categorie:	Wasmachine
Model:	SC2-1895ST

Heb je hulp nodig?

Als je hulp nodig hebt met LG SC2-1895ST stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachine LG

LG LDTH5554S Handleiding

19 Februari 2025

LG WD-16116FDB Handleiding

9 December 2024

LG DSTWH Handleiding

25 November 2024

LG WD-1465FDF Handleiding

25 November 2024

LG WD-1460FDF Handleiding

25 November 2024

LG WD-16220FDN Handleiding

25 November 2024

LG WD-1041WFN Handleiding

25 November 2024

LG WD-12111FDB Handleiding

25 November 2024

LG F4R3013NSWB Handleiding

23 November 2024

LG WT1210BBF Handleiding

23 November 2024

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Vedette VLT1155W Handleiding

5 April 2025

Vedette VLT1255W2 Handleiding

5 April 2025

Vedette VLT612E2 Handleiding

5 April 2025

Vedette VLT6112at Handleiding

5 April 2025

Vedette LTV6011 Handleiding

5 April 2025

Vedette VED6012EL Handleiding

5 April 2025

Vedette VT16022Q Handleiding

5 April 2025

Vedette VT16024Q Handleiding

5 April 2025

Vedette TVC651 Handleiding

5 April 2025

Vedette LTV652B2 Handleiding

5 April 2025