LG 29FU1RG Handleiding

LG Niet gecategoriseerd 29FU1RG

Lees hieronder de 📖 handleiding in het Nederlandse voor LG 29FU1RG (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 220 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Colour Television

OWNER’S MANUAL

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this infor-

mation to your dealer when you require service.

Model number :

Serial number :

P/NO : MFL62077612-EN (CW91A,MBM39475703) (1004-REV00)

Power

This set operates on an AC mains supply, the volt-

age is as indicated on the label on the back cover.

Never apply DC power to the set. In the event of

thunderstorms or powercuts, please pull out the

aerial and power plug.

Press the button on the front panel or sidePOWER

panel to turn off the TV when the TV set is not being

used for a long time.It is recommended to remove the

plug from the wall outlet(Power point).

Disconnecting device from mains

Mains plug is the disconnecting device. The plug

must remain readily operable

Warning

To prevent fire or shock hazard, do not expose the set

to rain or moisture.

Do not place anything containing liquid on top of the set,

this may cause a fire or could give an electric shock.

Service

Never remove the back cover of the set as this can

expose you to very high voltage and other hazards. If

the set does not operate properly, unplug it and call

your dealer.

Aerial

Connect the aerial cable to the socket on the back

cover. For the best reception an outdoor aerial

should be used.

Location

Position your set so that no bright light or sunlight

falls directly onto the screen. Care should be

taken not to expose the set to any unnecessary

vibration, moisture, dust or heat. Also ensure that

the set is placed in a position to allow a free ow

of air. Do not cover the ventilation openings on the

back cover.

Installation

Connection of external equipment

Aerial socket

1. Connect the RF out socket of the VCR to the

aerial socket on the back of the set.

2. Connect the aerial cable to the RF aerial in

socket of the VCR.

3. Store the VCR channel on a desired pro-

gramme number using the ‘Auto programme

tuning’ section.

4. Select the programme number where the

VCR channel is stored.

5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the VCR

to audio/video in sockets of the set and in sock-

ets of the VCR to RF OUT sockets of the set.

2. If the VCR is connected to the AV sockets on the

set, press the TV/AV button to select AV1 or

AV2(option).

3. Press the PLAY button on the VCR.The VCR

playback picture appears on the screen.

You can also record programmes received by the

TV on video tape via audio/video out sockets.

Note :

If you have a mono VCR, connect the audio cable

from the VCR to the socket ofAUDIO L/MONO

the set.

And if connected to AV2(option),then you should

select L+L mode by pressing the I/II/*(option) key.

If the VCRs are connected to AV2(option) and

Side AV(option) at the same time,only the Side AV

program will be displayed.

Side AV and Component can’t be used at the

same time.

Euro scart socket (option)

1. Connect the Euro scart socket of the VCR to

the Euro scart socket of the set.

2. Press the PLAY button on the VCR.

If your VCR outputs a switching voltage when

connected to Euro scart socket, the set will

switch to AV 1 mode automatically. But if you

want to keep on watching TV mode, press the

/ E

or NUMBER buttons.Otherwise press

the TV/AV button on the remote control

handset to select AV 1 The VCR playback pic-

ture appears on the screen.

You can also record programmes received by the

TV on video tape.

Note : Signal type RGB, i.e. the signals red, green

and blue can only be selected for the Euro scart

socket. These signals are transmitted, for exam-

ple, by a pay TV decoder, game machine or photo

CD unit, etc.

Component in sockets (option)

1. Connect the COMPONENT video output

sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the

COMPONENT (480i) to the COMPONENT

INPUT sockets (Y P P ) on the set.B R

2. Connect the audio cable from the COMPO-

NENT to AUDIO IN sockets of AV IN1 or AV

IN2(option).

3. Press the TV/AV button to select COMPO-

NENT.

4. Press the PLAY button on the COMPONENT.

The COMPONENT playback picture appears

on the screen.

Location and function of controls

Remote control handset

Before you use the remote control handset,

please install the batteries.

1. POWER

switches the set on from standby or o to

standby.

2. NUMBER BUTTONS

Switches the set on from standby or directly

select a number.

3. MENU

selects a menu.

4. D

/ E

E(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

/ G

(Volume Up/Down)

adjusts the volume.

adjusts menu settings.

accepts your selection or displays the current

mode.

5. TELETEXT BUTTONS (option)

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

SLEEP

sets the sleep timer.

EYE/*(option)

switches the eye function on or o.

8. MUTE

switches the sound on or o.

9. TV/AV

selects TV or AV mode.

switches the set on from standby.

exits the Teletext mode.

10.

I/II/*

selects the language during dual language

broadcast.

selects the sound output (option).

11. Q.VIEW (or YELLOW)

returns to the previously viewed programme.

*: No function

COLOURED BUTTONS : These buttons are

used for teletext (only TELETEXT models).

Battery installation

The remote control handset is powered by AAA

type batteries.Install batteries as indicated by the

polarity symbols ( and ) marked inside the

compartment.

Note : To avoid damage from possible battery

leakage, remove the batteries if you do not plan to

use the remote control handset for an extended

period of time

Front panel

MAIN POWER (ON/OFF)

switches the set on or o.

POWER/STANDBY INDICATOR

illuminates brightly when the set is in standby

mode.dims when the set is switched on.

REMOTE CONTROL SENSOR

Note : Only use the supplied remote control

handset. (When you use others, they will not

be able to function.)

selects a menu.

A/OK

accepts your selection or displays the current

mode.

/ G

(Volume Down/Up)

adjusts the volume.

adjusts menu settings.

/ E

E(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

AUDIO/VIDEO IN SOCKETS (AV IN2)(option)

Connect the audio/video out sockets of exter-

nal equipment to these sockets.

Note :AV2 on side panel is the same as AV2

on the back cover.

EYE (option)

adjusts picture according to the surrounding

conditions.

Note :

What is shown here may be somewhat dif-

ferent from your set or can not be supplied

on your area.



UPDATE/ HOLD/

Product specificaties

Merk:	LG
Categorie:	Niet gecategoriseerd
Model:	29FU1RG

Heb je hulp nodig?

Als je hulp nodig hebt met LG 29FU1RG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd LG

LG FFH-976AD Handleiding

25 November 2024

LG LX-330 Handleiding

23 November 2024

LG Studio LSCI307ST Handleiding

22 November 2024

LG LRE3027ST Handleiding

22 November 2024

LG LDG3015SW Handleiding

22 November 2024

LG Studio LSRE307ST Handleiding

22 November 2024

LG ST-750X Handleiding

4 November 2024

LG XBOOM Go XG2TBK Handleiding

4 November 2024

LG XBOOM Go XO2T Handleiding

4 November 2024

LG XBOOM Go XG8T Handleiding

4 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Kolcraft MLB Chicago Cubs Handleiding

26 November 2024

Kolcraft MLB New York Yankees Handleiding

26 November 2024

Kolcraft MLB San Francisco Giants Handleiding

26 November 2024

Kolcraft MLB St. Louis Cardinals Handleiding

26 November 2024

Nedis POCO106 Handleiding

26 November 2024

Nedis BTSM1GY Handleiding

26 November 2024

Turbosound TPOLEAJ-01 Handleiding

26 November 2024

Turbosound TSTAND-01 Handleiding

26 November 2024

IFM TAD981 Handleiding

26 November 2024

IFM TAD961 Handleiding

26 November 2024