Lenco iPT-22 DVD Handleiding

Lenco Overige computer accessoire iPT-22 DVD

Lees hieronder de 📖 handleiding in het Nederlandse voor Lenco iPT-22 DVD (30 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/30

0 1

INSTRUCTION MANUAL

DVD/CD PLAYER

WITH iPod/iPhone DOCKING &

SD/MMC CARD READER

WITH PLL FM STEREO RADIO AND 3D SOUND

MODEL: IPT-223

Please read following instructions prior to operating your unit.

Manufacturer of this unit follows a principle of continuous improvement and has no responsibility for any

changes that are made to the unit nor any liability for these changes. Thanks for your choice of our

products.

For information and support, www.lenco.eu

10 9

27 18

2 3

MAIN UNIT

1. PREV/TUNE- BUTTON

2. STOP BUTTON

3. iPod/iPhone DOCKING

4. NEXT/TUNE+ BUTTON

5. PLAY/PAUSE BUTTON

6. VOLUME CONTROLLER

7. REMOTE SENSOR

8. MEM BUTTON

9. CH+ BUTTON

10. CH- BUTTON

11. TONE BUTTON

12. LCD DISPLAY

13. STANDBY BUTTON

14. FUNCTION BUTTON

15. EJECT BUTTON

16. SLEEP BUTTON

17. SD/MMC CARD SLOT

18. SCART OUTPUT SOCKET

19. FM PIGTAIL ANTENNA

20. RIGHT AUX IN JACK

21. LEFT AUX IN JACK

22. VIDEO OUT JACK

23. POWER ON/OFF BUTTON

24. AC SOCKET

25. STAND FEET

26. DISC TRAY

27. HDMI SOCKET

REMOTE CONTROL

1. STANDBY BUTTON

2. SETUP BUTTON

3. FUNCTION BUTTON

4. MENU BUTTON

5. INFO BUTTON

6. PREVIOUS BUTTON

7. NAVIGATION UP & CH+ BUTTON

8. NAVIGATION LEFT & TUNE- BUTTON

9. NAVIGATION DOWN & CH- BUTTON

10. STOP BUTTON

11. VOL + BUTTON

12. TREBLE +/- BUTTON

13. VOL- BUTTON

14. NUMERIC BUTTONS

15. MEM/SUBTITLE BUTTON

16. ST/MO & AUDIO BUTTON

17. MUTE BUTTON

18. EJECT BUTTON

19. TITLE BUTTON

20. SLEEP BUTTON

21. NEXT BUTTON

22. NAVIGATION RIGHT & TUNE+ BUTTON

23. ENTER BUTTON

24. PLAY/PAUSE BUTTON

25. BASS +/- BUTTON

26. FAST BACKWARD BUTTON

27. FAST FORWARD BUTTON

28. REP BUTTON

29. GOTO BUTTON

30. A-B BUTTON

31. PROG BUTTON

32. ZOOM BUTTON

33. ANGLE BUTTON

CONNECT DVD PLAYER TO OTHER APPLIANCES

It is recommended you connect the player to a multi-system TV.

Ensure that this player and other appliances (TV set and amplifier) that will be connected to the player

are set to OFF mode and that the AC cords are disconnected from the wall outlet.

Avoid blocking ventilation holes of the connected appliances and make sure air around there can

circulate freely.

Read carefully and follow the instructions before connecting other appliances.

HDMI SCART OUTPUT

VIDEO OUT

AUDIO R AUDIO L VIDEO IN

HDMI

AV AUDIO/VIDEO INPUT

SCART

After connection is firmly and securely done, plug AC power cord to an applicable wall outlet and turn on

the player.

SCART VIDEO OUTPUT SOCKET

The SCART OUTPUT SOCKET is for the video and audio signals to be produced in high quality and

fidelity between video devices. Please notice that the player with SCART socket will have to be

connected to a TV set with the same SCART socket for reproduction of video and audio signals.

Note: The SCART VIDEO OUTPUT SOCKET works at DVD mode only.

HDMI OUTPUT SOCKET

The HDMI OUTPUT SOCKET is supplied at the rear of the unit for you enjoy photos or videos on high

resolution. Plug the HDMI cable (optional) to the unit and the TV set with the HDMI socket as the above

illustration for the high resolution photo/video output.

Note: The HDMI OUTPUT SOCKET works at DVD mode only.

VIDEO OUTPUT

There is a video output jack on the rear of the unit, so that you could make the video output to a TV set

or other appliance with video input jack for enjoying video. To output the video, connect one end of the

video cable to the video output jack of the unit, the other end to the video input jack of the appliance.

POWER SUPPLY

Plug one end of the AC cord into the AC socket on the unit, then plug the other end into the AC wall

outlet.

NOTE: During playback, if not any operation in 6 hours, the unit will switch to standby mode

automatically.

VIDEO cable

HDMI cable

(optional) SCART cable

(optional)

TV set

STANDBY

FUNCTION SETUP MUTE EJECT

INFO MENU TITLE SLEEP

CH+

BASS

CH-

TUNE+

1 2 3

4 5 6

789

MEM

GOTO A-B

ST/MO

PROG

ENTER

TUNE

TREBLE VOL

REP

AUDIO ANGLE ZOOM

4 5

SLEEP FUNCTION

Press SLEEP button at power on mode. Each time SLEEP button is pressed, the display changes

Sleep time in a sequence as follows:

90 80 70 60 50 40 30 10 20 OFF

When the sleep time is expired, the unit will switch off automatically.

iPod/iPhone OPERATING

PLAYING AN iPod/iPhone

1. Dock an iPod/iPhone onto the unit.

2. Press the POWER ON/OFF button on the rear of the unit and press STANDBY button to turn the unit

on.

3. Press the FUNCTION button continuously to toggle the unit to IPOD mode.

4. Press PLAY/PAUSE button to play and pause the docked iPod/iPhone.

5. During normal playback, Press PREVIOUS/NEXT button to skip the tracks ahead or backward.

Press and hold FAST FORWARD or FAST BACKWARD button on the remote to search through the

current track forward or backward at a high speed.

6. Press MENU button on the remote to return back the menu the inserted iPod/iPhone, use navigation

up/down button to select your desired track for playback, confirm your selection by pressing ENTER

button.

7. Use STOP button to cease the iPod/iPhone playback.

NOTE: During playback, the connected iPod/iPhone may skip to another song accidently. Once the

problem occurs, please change the shake from “on” to “off” inside Settings of iPod/iPhone.

FM RADIO

TUNING THE FM RADIO

1. Press the POWER ON/OFF button on the rear of the unit and press STANDBY button to turn the unit

on.

2. Press FUNCTION button to switch the unit to radio mode (the radio frequency shows on the LCD

display).

3. Press PREV/NEXT button on the main unit or TUNE+/- button on the remote to fine tune the radio

station. Press and hold PREV/NEXT button on the unit or TUNE-/+ button on the remote to

automatically tune the radio frequency backward and forward respectively. When the tuning goes to

one available station, broadcasting starts immediately.

4. Press ST/MO button on the remote to switch the radio between FM(MONO) and FM(ST).

5. If the unit broadcast a program with RDS, the RDS icon will be shown on the LCD display. Press

INFO button on the remote to check the frequency of the current station.

SAVING FM RADIO STATIONS TO THE UNIT'S MEMORY

1. After tuning the FM radio to the desired stations, press MEM button, "MEM" is shown on the LCD

display with a flashing number of a memory cell.

2. Press CH+/ CH- button to select the radio memory cell.

3. Press MEM button again to save the current radio station to the selected memory cell.

4. To recall the preset station frequency, press CH+ or CH- button repeatedly.

TONE SETTING FOR THE UNIT

During playback, press TONE button once, and use VOLUME CONTROLLER on the unit to adjust the

bass. Press TONE button twice repeatedly for adjusting treble effect by rotating VOLUME

CONTROLLER on the unit as adjust bass effect. Press the TONE button thrice to resume the previous

display.

The bass and treble effect also can be adjusted by pressing BASS+/- button and TREBLE+/- button on

the remote.

MUTE THE UNIT

During playback, press MUTE button to switch off the audio. Press the button again to resume the

audio.

AUX IN

Your player can be used as a power amplifier to playback the programs from portable radio, TV set or

MP3 player or whatever provided this appliance is so designed that audio signal may be produced

through a LINE-OUT jack or the like.

Observe the following steps to connect the player to another appliance:

1. Connect the appliance into the player's left & right AUX IN jacks with the LINE OUT cables.

2. Press STANDBY button to turn the unit on.

3. Press FUNCTION button repeatedly to switch the unit to AUX mode.

4. Power on the appliance and begin play.

At this time, you will be able to hear the sound produced from the connected appliance.

3D FUNCTION

In case the speaker cut off on the chipset protection, please turn OFF and ON as reset to resume the

3D function.

DVD OPERATIONS

PREPARATION

Power on the TV set and select video input mode.

Power on the audio system which is connected to the player.

GET STARTED

1. Press the POWER on/off button on the rear of the unit and then press STANDBY button to turn on the

player.

2. Press FUNCTION button repeatedly to switch to DISC mode. Press EJECT key to open the disc tray.

3. Place a disc onto the disc tray.

4. Close the disc tray by pressing the EJECT button again and the playback starts automatically.

5. When a menu screen appears on the TV, press the navigation buttons or press the numeric buttons

to select a preferred track number, then press ENTER button on the remote or PLAY/PAUSE button

on the unit to start playback.

ADJUST THE VOLUME

Adjust the volume output by pressing the VOL+/- button on the remote or rotating the VOLUME

CONTROLLER on the unit.

SKIP AHEAD OR BACK

Press PREVIOUS button during play to skip to previous chapter (DVD) or track (CD), Press NEXT

button during play to skip to next chapter (DVD) or track (CD).

RAPID ADVANCE/REVERSE

During playback, press FAST FORWARD/FAST BACKWARD button on the remote continuously to

scan the disc forward or backward at X2, X4, X8, X20 normal speed.

Press PLAY/PAUSE button to resume normal play.

STOP PLAYBACK

Press STOP button during playback to stop playback; the player activates its resume function when

STOP is pressed in STOP mode; press PLAY/PAUSE button again, playback resumes at the point it

stopped previously; open the disc tray or press the STOP button one more time to clear the resume

function.

Product specificaties

Merk:	Lenco
Categorie:	Overige computer accessoire
Model:	iPT-22 DVD
Kleur van het product:	Zwart
Gewicht:	9000 g
Breedte:	315 mm
Diepte:	305 mm
Hoogte:	933 mm
Beeldscherm:	LCD
Connectiviteitstechnologie:	Docking
Ethernet LAN:	Nee
Meegeleverde kabels:	AV
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MMC, SD
Snelstartgids:	Ja
Aantal HDMI-poorten:	1
Ingebouwde luidsprekers:	Ja
Stroomverbruik (in standby):	0.9 W
Aantal luidsprekers:	2
Aansluiting voor netstroomadapter:	Ja
Ingebouwde subwoofer:	Ja
Aansluitingen:	1 x Scart\n1 x Aux
Merkcompatibiliteit:	Apple
Gemiddeld vermogen subwoofer:	50 W
Soort optische drive:	DVD-ROM
Compatibiliteit:	iPod
Vermogen luidsprekers:	20 W
Afstandsbediening inbegrepen:	Ja
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 Hz
Stroomverbruik (typisch):	70 W
Inclusief optische drive:	Ja
Oplaadfunctie:	Ja