Lenco BT-9000 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Lenco BT-9000 (71 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/71
2.1 Audio system with
Bluetooth, DAB+/NFC/CD
BT-9000
Instruction Manual
For information and support www.lenco.eu
Important Safety Instructions
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.
However, improper use can result in potential electrical shock or re hazards. Please read all safety and operating
instructions carefully before installation and use, and keep these instructions handy for future reference. Take special
note of all warnings listed in these instructions and on the unit.
1. Water and Moisture
The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a set basement.
2. Ventilation
The unit should be situated so that its location or position does not interfere with its proper ventilation. For
example, it should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet,
which may impede the ow of air through the ventilation openings.
3. Heat & Flame
The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including ampliers) that produce heat.
No naked ame sources, such as lighted candles, should be placed on the apparatus.
4. Power Source
The unit should be connected to a power supply only of the type described in the operating instructions or as
marked on the appliance.
Where the power adaptor is used as the disconnect device, the disconnect device shall remain readily operable.
5. Power Adaptor Wire Protection
The power adaptor wire should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them. It is always best to have a clear area from where the wire exits the unit to where the
adaptor plugged into an AC outlet.
6. Cleaning
The unit should be cleaned only as recommended. See the section “Care and Maintenance” of this manual for
cleaning instructions.
7. Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on
the product. It shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases,
shall be placed on the apparatus.
8. Attachments
Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection
Unplug the unit from the wall outlet and disconnect the periods of time. This will prevent damage to the product
due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets, extension cords as this can result in a risk of re of electric shock.
11. Damage Requiring Service
This unit should be serviced by qualied service personnel when:
A. The power supply cord or plug has been damaged.
B. Objects have fallen into or liquid has been spilled into the enclosure.
C. The unit has been exposed to rain.
D. The unit has been dropped or the enclosure damaged.
E. The unit exhibits a marked change in performance or does not operate
normally.
12. Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord should
be unplugged from the unit to prevent damage or corrosion.
13. Servicing
The user should not attempt to service the unit beyond those methods described in the user’s operating
instructions. Service methods not covered in the operating instructions should be referred to qualied service
personnel.
GB 2
GB 3
Warnings
Follow the advice below for safe and appropriate operations.
ON PROTECTION AGAINST LASER ENERGY EXPOSURE
As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the
casing.
● Stop operation immediately if any liquid or solid object should fall into the cabinet.
● Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly.
● Do not put anything in the safety slot. If you do, the laser diode will be ON when the CD door is still open.
● This unit employs a laser. The use of controls or adjustment or performance of procedures other than those
specied here may result in exposure to hazardous radiation.
Features
Thank you for purchasing the CD DAB+ Radio with Bluetooth music system.
This model incorporates following features:
- Stream and playback Apple device (iPad /iPhone/iPod Touch) and Android OS smart phone songs through
Bluetooth technology.
- NFC (Near Field Communication) function for easy Bluetooth connection
- CD player with playback of Audio CDs and MP3 songs
- ID3 technology displaying song title
- DAB / DAB+ receiver
- FM receiver with digital read out on LCD
- RDS function
- LCD Clock
- Sleep timer function
- LCD display with back-light
- Three different Audio inputs (LINE-IN / AUX-IN) for connecting external audio source/player.
- Built-in 2 High Fidelity Speakers
- Build-in Subwoofer for heavy bass effect
- With Bass and Treble settings
iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
iPhone, iPad and iPod touch are not included.
Installation
Clock setting battery back-up
A backup battery compartment located at rear of the unit.
(1) Open the clock battery compartment lid.
(2) Follow the polarity diagram shown inside the compartment and install 2 x AAA (UM-4) batteries (not included).
(3) Close the clock battery compartment lid.
Remote Control
A battery compartment located at bottom of the remote control.
- For the rst time usage, remove the insulation tag.
- To replace battery, slide out the battery holder then follow the polarity diagram shown on the holder and install a
fresh CR2025 / DC 3V Lithium battery. Insert the battery holder back into the remote control bottom.


Product specificaties

Merk: Lenco
Categorie: Hifi systeem
Model: BT-9000
Kleur van het product: Wit
Gewicht: 3300 g
Breedte: 351 mm
Diepte: 214 mm
Hoogte: 136 mm
Geïntegreerde klok: Ja
Stroombron: AC
Bluetooth: Ja
Ondersteund audioformaat: MP3
USB-poort: Nee
Near Field Communication (NFC): Ja
Geïntegreerde geheugenkaartlezer: Nee
Gemiddeld vermogen: 50 W
Stroomverbruik (in standby): 1 W
Ondersteund aantal accu's/batterijen: 2
Aansluiting voor netstroomadapter: Ja
Soort tuner: Digitaal
Ingangsspanning: 100-240 V
Frequentie: 50 - 60 Hz
Op afstand bedienbaar: Ja
Lijningang: Ja
MP3 afspelen: Ja
Karaoke: Nee
AUX ingang: Ja
Optische drive type: CD, CD-R, CD-RW
Ondersteunde frequentiebanden: DAB, DAB+, FM, PLL
Bass reflex: Nee
Optical disc player: Ja
Cassette deck: Nee
Apple docking-compatibiliteit: Niet ondersteund
Afstandsbediening inbegrepen: Ja
Wifi: Nee
Stroomverbruik (typisch): 54 W
Batterijen inbegrepen: Nee
Type beeldscherm: LCD
Type batterij: AAA

Heb je hulp nodig?

Als je hulp nodig hebt met Lenco BT-9000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem Lenco

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Lenoxx

Lenoxx CD813 Handleiding

16 November 2024
Denon

Denon CEOL N-8 Handleiding

16 November 2024
Fiio

Fiio M7K Handleiding

16 November 2024
Fiio

Fiio X1II Handleiding

16 November 2024
Fiio

Fiio M3 Handleiding

16 November 2024
Fiio

Fiio X3 Mark III Handleiding

16 November 2024
Samsung

Samsung MM-X7 Handleiding

15 November 2024
Auna

Auna VCP-191 Handleiding

14 November 2024