Lelit Anita PL042 Emi Handleiding

Lelit Espresso apparaat Anita PL042 Emi

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Lelit Anita PL042 Emi (4 pagina's) in de categorie Espresso apparaat. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
PL042EMI
ESPRESSO MACHINE WITH BUILT-IN GRINDER
Pag. 2
COMPONENTS :
1. Cold water tank
2. Cup warmer
3. Steam/coffee pilot light
4. Steam/hot water knob
5. Strainer holder retaining ring
6. Steam/hot water tube
7. Removable cup rest
8. Strainer holder
9. Single cup strainer
10. Two cup strainer
11. On/off switch
12. Steam switch
13. Coffee/hot water switch
14. Indicator light: machine on
15. Coffee press
17. Coffee beans container
18. Filter for pods
19. Removable water drainage tray
20. Removable ground coffee tray
21. Ground coffee switch
22. Grinding degree scale
23. Grinding regulation knob
24. Ground coffee distributor
25. Manometer
USER INSTRUCTIONS
Starting the machine:
1. Remove the machine from its packing and make sure all packing parts have been taken off (including the
protection bags).
2. Lay the machine on a flat and steady surface far away from hot places and from the water taps.
3. Remove the water tank cover on the back of the machine and take out the water tank (1) paying attention not
to damage the water tubes inside it.
4. Fill the tank (1) with cold water.
5. Replace the water tank back in the machine and check that the water tubes are not bent and that the filter is
well set on one of them.
6. Plug in the machine in the mains. Make sure that the wall socket is of the right voltage.
7. Place the filter holder (8) under the brewing group (5) and turn it from the left to the right. Leave it there so
that it can get warm and it gets ready for use.
8. Switch the machine on by pressing the on/off switch (11). The built-in light (14) comes on to confirm the power
supply.
9. Open the steam/hot water knob (4).
10. Press the steam switch (12) and the coffee/hot water switch (13).
11. When water comes out of the steam spout (6), press the coffee/hot water switch (13) and the steam switch
(12) again and close the steam/hot water knob (4).
12. After completing all these operations, leave the machine on.
Grinding adjustment:
13. As a reference for the grinding degree, a grinding degree scale (20) has been placed on the coffee beans
container (19): β€œ7.6.5.4.3.2.1”
14. By taking as a point of reference the tally mark in the machine frame and by turning grinding regulation knob
(23), the grinding degree scale will turn accordingly.
15. Choose higher degrees to get coarse-ground coffee, or smaller degrees to get fine-ground coffee.
16. A correct grinding degree (taking into consideration the various coffee blends) is essential to get a good cup of
coffee. We suggest degree 3 to get a medium grinding.
Preparing an espresso coffee:
17. Check that the tank (1) contains water.
18. Press the on/off switch (11). The light (14) and the pilot light (3) will come on. Do this operation only if the
machine is off. If it’s on pass to the following point.
19. As soon as the pilot light (3) goes off, the machine is ready for use.
20. Place the single cup strainer (9) or the two cup strainer (10) in the strainer holder (8) as described in point 4.
21. Drop the bean coffee in the bowl (17)
22. Press the button (21) with the strainer holder (8) to activate the coffee grinder. When you have got the desired
coffee quantity, take the strainer holder (8) off.
23. Pack the coffee in the strainer against the press (15).
24. Insert the strainer holder (8) in the retaining ring (5) and turn it hard to the right; place the cups on the
removable cup rest (7).
25. Press the coffee/hot water switch (13).
26. When you have got the right quantity of coffee, press the switch coffee/hot water again (13).
27. Remove the strainer holder (8) and throw away the coffee grounds.
Preparing an espresso with the use of coffee pods:
28. Check that the water tank (1) has been filled in with water.
29. Press the on/off switch (11): the indicator light: machine on (14) and the indicator light: steam/coffee ready (3)
will come on. Do this operation only if the machine is off. If it’s on pass to the following point.
30. As soon as the indicator light: steam/coffee ready (3) goes off, the machine is ready for use.
31. Fit the pod filter (18) into the filter holder (8) that has been warmed up by leaving it attached to the brewing
group as described in point 4.
32. Open the single packed pod not damaging the pod.
33. Place the pod in its filter (18).
Pag. 3
34. Insert the filter holder (8) in the brewing group ring (5), turn it from left to right with force, then put the cup on
the removable water drainage tray (7).
35. Push the coffee/hot water switch (13).
36. Once you get the coffee desired quantity, push the coffee/hot water switch (13) again.
37. Remove the filter holder (8) and throw away the used pod.
Steam:
38. Check that the water tank (1) has been filled in with water.
39. Press the on/off switch (11): the indicator light: machine on (14) and the indicator light: steam/coffee ready (3)
will come on. Do this operation only if the machine is off. If it’s on pass to the following point.
40. Press the steam switch (12).
41. As soon as the light: steam/coffee ready (3) goes off, the machine is ready for use.
42. Open the steam/hot water knob (4). First some water will flow out and then the steam.
43. Put the cup with the desired infusion under the steam tube (6) and turn the knob completely.
44. When the drink has been suitably frothed, close the steam/hot water knob (4) and press the steam switch (12)
again.
45. Reopen the steam/hot water knob (4) and repress the steam switch (12) and the coffee/hot water switch (13)
again. When the water flows out of the steam tube (6), close the steam/hot water knob (4) again and at the
same time press the coffee/hot water switch (13) and the steam switch (12) again. Clean carefully the
steam/hot water tube (6).
Hot water:
46. Check that the water tank (1) has been filled in with water.
47. Press the on/off switch (11): the indicator light: machine on (14) and the indicator light: steam/coffee ready (3)
will come on. Do this operation only if the machine is off. If it’s on pass to the following point.
48. As soon as the light: steam/coffee ready (3) goes off, the machine is ready for use.
49. Open the steam/hot water knob (4).
50. Press the steam switch (12) and the hot coffee/hot water switch (13). Hot water will flow out from the steam
tube (6) immediately.
51. Once you have got the desired quantity of water, repress the steam switch (12) and the coffee/hot water switch
(13) again and close the steam/water knob (4).
52. After obtaining hot water from the tube, make sure that there is still water in the tank (1).
Useful Tips:
βˆ’ The strainers (9 and 10) do not need to be washed after every single use but we suggest checking that the
holes are not obstructed.
βˆ’ For a better result, we suggest keeping the cups warm on the cup-warmer (2) which only operates by machine
on.
Routine maintenance and precautions:
βˆ’ It is recommended to clean, after each use, the steam tube and the strainer holder carefully
βˆ’ For cleaning it is recommended the use of a wet damp cloth
βˆ’ Do not leave the machine outdoor. And do not immerse the machine in water.
βˆ’ The machine can be used only by adults and must be kept away from children
βˆ’ Do not wash strainer and strainer holder in dishwasher.
TECHNICAL DATA:
Voltage: 230 V - 50 Hz; 120 V – 60 Hz Water tank: 2.7 litres
Power: 1200 W Dimensions (HxLxD): 39*33*42 cm
Heating time: ca. 3 min. Weight: 12.2 kg
Pump pressure: 15 bar To be operated with ground coffee and coffee pods
LEGAL WARRANTY
This product is covered by the warranty laws valid in the country where the product has been sold; specific
information about the warranty terms can be given by the seller or by the importer in the country where the product
has been purchased. The seller or importer is completely responsible for the product.
The importer is completely responsible also for the fulfillment of the laws in force in the country where the importer
distributes the product, including the correct disposal of the product at the end of its working life.
Inside the European countries the laws in force are the national laws implementing the EC Directive 44/99/CE.
The inserted data and pictures can be subject to changes without previous notice for the improvement of the
machine’s performances.
TROUBLESHOOTING:
Dear Customer,
We thank you for buying one of our products, made in accordance with the most up-to date technological innovations.
Following carefully the simple operations of use contained in this manual, which comply with essential safety
regulations, you will get the best performances and notice the remarkable reliability of this product along the years.
You find here below an easy table describing some malfunctioning of the machine with its solutions:


Product specificaties

Merk: Lelit
Categorie: Espresso apparaat
Model: Anita PL042 Emi

Heb je hulp nodig?

Als je hulp nodig hebt met Lelit Anita PL042 Emi stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Espresso apparaat Lelit

Handleiding Espresso apparaat

Nieuwste handleidingen voor Espresso apparaat