LD Systems MEI 100 G2 B6 Handleiding

LD Systems Oordopje MEI 100 G2 B6

Lees hieronder de 📖 handleiding in het Nederlandse voor LD Systems MEI 100 G2 B6 (72 pagina's) in de categorie Oordopje. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/72
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
LDMEI G100 ²
WIRELESS SYSTEMIN EAR MONITORING
LDMEI100G2
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4
SYSTEM COMPONENTS 5
FRONT PANEL TRANSMITTER 6
REAR PANEL TRANSMITTER 6-7
BODY PACK RECEIVER 7-8
SYSTEM SETUP 9-10
SETUP AND TROUBLESHOOTING 11
SPECIFICATIONS 12
MANUFACTURER´S DECLARATIONS 13
DEUTSCH
SICHERHEITSHINWEISE 14-15
EINFÜHRUNG 15
SYSTEMKOMPONENTEN 16
GERÄTEFRONT SENDER 17
GERÄTERÜCKSEITE SENDER 17-18
TASCHENEMPFÄNGER 18-19
SYSTEMEINSTELLUNG 20-21
AUFSTELLUNG UND FEHLERBEHEBUNG 22
SPEZIFIKATIONEN 23
HERSTELLERERKLÄRUNGEN 24
FRANCAIS
MESURES PRÉVENTIVES 25-26
INTRODUCTION 26
COMPOSANTS DU SYSTÈME 27
FACE AVANTÉMETTEUR 28
PANNEAU ARRIÈRE ÉMETTEUR 28-29
RÉCEPTEUR DE POCHE 29-30
MENUS DE RÉGLAGE DE L‘APPAREIL 31-32
MISE EN PLACE ET EN CAS DE PROBLÈME 33
CARACTÉRISTIQUES 34
DECLARATIONS 35
ESPAÑOL
MEDIDAS DE SEGURIDAD 36-37
INTRODUCCIÓN 37
COMPONENTES DEL SISTEMA 38
PANEL FRONTAL DEL TRANSMISOR 39
PANEL POSTERIOR DEL TRANSMISOR 39-40
RECEPTOR DE PETACA 40-41
CONFIGURACIÓN DEL SISTEMA 42-43
INSTALACIÓN Y RESOLUCIÓN DE PROBLEMAS 44
ESPECIFICACIONES 45
DECLARACIÓN DEL FABRICANTE 46
POLSKI
ŚRODKI OSTROŻNOŚCI 47-48
INTRODUCTION 48
ELEMENTY SYSTEMU 49
PRZÓD NADAJNIKA 50
TYŁ NADAJNIKA 50-51
ODBIORNIK KIESZONKOWY 51-52
USTAWIENIA SYSTEMU 53-54
USTAWIENIE I USUWANIE USTEREK 55
SPECYFIKACJA 56
DEKLARACJE PRODUCENTA 57
ITALIANO
MISURE PRECAUZIONALI 58-59
INTRODUZIONE 59
SYSTEMKOMPONENTEN 60
PANNELLO FRONTALE TRASMETTITORE 61
PANNELLO POSTERIORE TRASMETTITORE 62-63
RICEVITORE PORTATILE 63-64
IMPOSTAZIONI DI SISTEMA 64-65
MONTAGGIO ED ELIMINAZIONE DEI GUASTI 66
SPECIFICHE 67
DICHIARAZIONI DEL PRODUTTORE 68
ITALIANOPOLSKIESPAÑOL
FRANCAISDEUTSCHENGLISH
3
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. LD Systems stands for this with its name and many years of experience
as a manufacturer of high-quality audio products. Please read this User‘s Manual carefully, so that you can begin making optimum use of
your LD Systems product quickly. You can find more information about LD-SYSTEMS at our Internet site WWW. .COMLD-SYSTEMS
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.

Product specificaties

Merk: LD Systems
Categorie: Oordopje
Model: MEI 100 G2 B6

Heb je hulp nodig?

Als je hulp nodig hebt met LD Systems MEI 100 G2 B6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Oordopje LD Systems

LD Systems

LD Systems U505.1 Handleiding

14 November 2024
LD Systems

LD Systems LDS-U50 Handleiding

24 Mei 2023
LD Systems

LD Systems LDS-U3047IEM Handleiding

21 Mei 2023
LD Systems

LD Systems HPA1 Handleiding

15 Mei 2023
LD Systems

LD Systems MEI 100 G2 B6 Handleiding

10 Mei 2023
LD Systems

LD Systems MEI 100 G2 B5 Handleiding

30 April 2023
LD Systems

LD Systems U304.7 Handleiding

29 Maart 2023
LD Systems

LD Systems U504.7 Handleiding

23 Maart 2023
LD Systems

LD Systems MEI 1000 G2 Handleiding

4 Februari 2023
LD Systems

LD Systems MEI 100 G2 Handleiding

9 December 2022

Handleiding Oordopje

Nieuwste handleidingen voor Oordopje

JLab

JLab Epic Handleiding

15 November 2024
JAZ Audio

JAZ Audio Allox Handleiding

14 November 2024
Logitech

Logitech G FITS Handleiding

14 November 2024
Edifier

Edifier X6 Handleiding

14 November 2024
Edifier

Edifier TWS NB2 Handleiding

14 November 2024
JVC

JVC HA-A4T Handleiding

14 November 2024
JVC

JVC HA-NP40T Handleiding

3 November 2024
Prixton

Prixton TWS163 Wood Handleiding

2 November 2024
Audio-Technica

Audio-Technica ATH-CKS50TW2 Handleiding

1 November 2024
Audio-Technica

Audio-Technica ATH-CC500BT2 Handleiding

1 November 2024