Lancom YS-7154CF Handleiding

Lancom Schakelaar YS-7154CF

Lees hieronder de 📖 handleiding in het Nederlandse voor Lancom YS-7154CF (1 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Hardware Quick Reference


 
i
Before initial startup, please make sure to take notice of the information regarding
the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby
power socket that is freely accessible at all times.
All power plugs of the device must be freely accessible.
Please note that support for third-party accessories is not provided.



Mounting & connecting
LED description & technical details

 
 
 

 

 
 
 
 
 

 
 

 
 
 

Use an Ethernet cable to use this out-of-band service port
for an IP interface independent of the switching plane for
management tasks or connection to a monitoring server.
In particular, this port can be used as a VPC-keepalive link
(split-brain detection).

Connect a USB stick to the USB interface to store general
configuration scripts or debug data. You can also use this
interface to upload a new firmware.

Connect the configuration interface to the USB interface of
the device you want to use for configuring / monitoring the
switch using the serial configuration cable supplied.

Insert suitable LANCOM transceiver modules into the
SFP28 interfaces 1 to 48. Choose cables which are
compatible with the transceiver modules and connect
them as described in the transceiver modules mounting
instructions:
lancom-systems.com/transceiver-modules-mi.

Insert suitable LANCOM transceiver modules into the QSFP28 interfaces 49 to 54.
Choose cables which are compatible with the transceiver modules and connect them as
described in the transceiver modules mounting instructions:
lancom-systems.com/transceiver-modules-mi.

Use the enclosed grounding bracket with screw to secure the switch against ground.

To remove a fan module in case of defect, loosen the knurled screw of the module and
remove the module from the plug-in unit. To install a new fan module, push it into the
corresponding slot. Fasten the module to the switch housing with the knurled screw.
Please note that a defective fan should be replaced within 48h.

Supply the device with power via the power supply sockets of the power supply
modules. Use the supplied power cords or a country-specific LANCOM Power Cord.
To remove the power supply module, disconnect the module from the power supply and
then pull the plug out of the module. While pressing the release lever to the left, you
can pull the module out of the device by the handle .
YS-7154CF
SYS PSO PS1FAN
ID
RESET
SS
49 5047 4845 4643 4441 4239 4037 3835 3633 3431 3229 3027 2825 2623 2421 2219 2017 1815 1613 1411 129 107 85 63 41 2 51 52 53 54
 
 

Left LED
 
 
 
Right LED
 
 
 

 
 




 
 
 
 
 
 
 
 



 

 

 
 
 
 
 

 
 


 



🄵
 
 
 

 

 



 



🄶
 
 
 

 
 
 


LANCOM YS-7154CF
YS-7154CF
SYS PSO PS 1FAN
ID
RESE T
SS
1311 129 107 85 63 41 2 49 5047 4845 4643 44
2
51 52 53 54
FAN
0
 
FAN
4
FAN
3
FAN
2
FAN
1
FAN
0
 


Product specificaties

Merk: Lancom
Categorie: Schakelaar
Model: YS-7154CF

Heb je hulp nodig?

Als je hulp nodig hebt met Lancom YS-7154CF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Schakelaar Lancom

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar