Lancom R&S UF-760 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Lancom R&S UF-760 (2 pagina's) in de categorie Firewall (hardware). Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
T E C H N I C A L D A T A
Hardware
Power supply 2 power supply modules (100–240 V, 50–60 Hz)
Power consumption Max. 300 W each active power supply module
Environment Temperature range 0–40 °C; humidity 10–85 %, non-condensing
Housing Robust metal housing 1 HU, with mounting brackets for 19“ mounting;
Network connections on the front side
Fans 4
Dimensions (mm) 440 x 44 x 364 (W x H x D)
Interfaces
ETH 8x 10 / 100 / 1000 Mbps Gigabit Ethernet ports
SFP+ 2x SFP+ ports
USB 3x USB 2.0 ports
Console 1x RJ45 configuration interface
Declaration of Conformity
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in
compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of
the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
Package contents
Documentation Quick Reference Guide (DE/EN), Quick Install Guide (DE/EN), Service & Support Guide (DE/EN)
Accessories 2x IEC power cable 230 V; 2x 19“ mounting brackets
M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E
LANCOM R&S®UF-760
Quick Reference Guide
C ud eadylo -r
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document
contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 112125/12/21
4Please observe the following when setting up the device
AThe mains plug of the device must be freely accessible.
ADo not rest any objects on top of the device and do not stack multiple devices.
AKeep the device’s ventilation slots clear of obstruction.
AMount the device into a 19” unit in a server rack using the separately available rack mount.
Before initial startup, please make sure to take notice of the information regarding the intended use under !www.lancom-systems.com/safety
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
a LEDs Power / HDD
HDD off No HDD read / write access
HDD red HDD read / write access
POWER off Device switched off
POWER green Device ready and accessible
c LEDs 10G SFP+
Off no link detected
Green, permanently Link detected, no port activity
Green, blinking Link detected, port activity
a b c
c LEDs 1G ETH
LEDs left - Link activity
Off no link detected
Green, permanently Link detected, no port activity
Green, blinking Link detected, port activity
LEDs right - Link speed
Off Link speed 10 Mbps
Green, permanently LinkSpeed 1000 Mbps
Orange, permanently Link speed 100 Mbps
fSlot for extension modules
Slot for RJ45, SFP or (Q)SFP+ extension modules
gGround connection (rear side)
Grounding screw for connecting a grounding cable
hUSB 2.0 interface (rear side)
Interfaces for reinstallation of the device software.
Not necessary for initial commissioning.
iPower switch (rear side)
Start up the device via the power switch after you have
established the power supply.
jPower supply modules (rear side)
Supply power to the device via both power connectors. Please
use the supplied IEC power cables.
kButton for deactivating the acoustic alarm in case of
power supply problems (rear side)
aRESET button
Press the reset button to restart the device.
RESET
bSerial configuration interface RJ45 (CONSOLE)
Maintenance interface for expert configuration.
Not necessary for initial commissioning.
cUSB 2.0 interfaces
Interfaces for reinstallation of the device software.
Not necessary for initial commissioning.
dTP Ethernet interfaces ETH0 - ETH7
Connect the ETH0 - ETH7 TP Ethernet interfaces to additional
network components using suitable Ethernet cables.
eSFP+ interfaces 8 - 9
Connect the SFP+ interfaces 8 and 9 to other network components
using suitable SFP(+) modules.
ba c e f
d
gj
h i k


Product specificaties

Merk: Lancom
Categorie: Firewall (hardware)
Model: R&S UF-760
Breedte: 440 mm
Diepte: 364 mm
Hoogte: 44 mm
LED-indicatoren: Ja
Aan/uitschakelaar: Ja
Vormfactor: 1U
Connectiviteitstechnologie: Bedraad
Ingebouwde ventilator: Ja
Aantal USB 2.0-poorten: 3
Netvoeding: 300 W
Aantal ventilatoren: 4 ventilator(en)
Web-gebaseerd management: Ja
Reset button: Ja
Rack-montage: Ja
Aantal voedingen: 2
Redundante voeding: Ja
DHCP server: Ja
Quality of Service (QoS): Ja
DHCP client: Ja
Aantal Gigabit Ethernet (koper)-poorten: 8
Console port: RJ-45
WAN-poort: Ethernet (RJ-45)
URL- filtering: Ja
Firewall throughput: - Mbit/s
IPS/IDS throughput: 13000 Mbit/s
VPN tunnels quantity: 5000
DDoS-bescherming: Ja
AC-ingangsspanning: 100-240 V
AC-ingangsfrequentie: 50 - 60 Hz
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 85 procent
Dynamic DNS (DDNS): Ja
Syslog: Ja
Routing protocols: BGP, IP
VoIP: Ja
Statische route: Ja
Load balancing: Ja
IPSec-VPN-doorvoercapaciteit: 19.7 Gbit/s
Deep Packet Inspection (DPI): Ja
Dynamische routering: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Lancom R&S UF-760 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden