Lanaform PO-100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Lanaform PO-100 (68 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/68
PO-100
PULSE OXIMETER
OXYGEN
SATUR ATION
PULSE
RATE
PERFUSION
INDEX
E N G L I S H
Introduction
Thank you for choosing the pulse oxime-
ter by LANAFORM.
The Pulse Oximeter is a non-invasive
method used to measure blood oxygen
saturation (
SpO
2
) by checking the percent-
age of oxygen-saturated haemoglobin as
well as the Perfusion Index (PI) and heart
rate measurement. This process has been
in regular use now for twenty years and is
proving to be an essential control in medi-
cal practice for maintaining oxygen levels
and preventing respiratory problems. The
value of the oxygen saturation may be re-
garded as dangerous if it is below 90% for
arterial blood. Normal value is 100% under
normal atmospheric conditions.
Please read all the instructions before
using your product, particularly these
basic safety instructions.
The photographs and other images
of the product in this manual and on the
packaging are as accurate as possible,
but do not claim to be a perfect repro-
duction of the product.
Contents
01 Unpacking
02 Contents of the package
03 Symbols
04 Safety precautions
05 Product description
06 Product structure
07 Description of the screen
08 Settings
09 Instructions for use
10 Reading the measurements
11 About the display
12 Replacing the batteries
13 Fixing the strap
14 Cleaning and disinfecting routine
15 Maintenance
16 Technical specications
17 Safety category
18 Storage et transport
19 Manufacturer’s guidelines
and declaration - Electromag-
netic emissions
20 Limited warranty
21 Waste disposal
22 After-sales service
01 Unpacking
Please open the packaging carefully be-
fore use. Check whether all the accessories
are present and whether any components
have been damaged during transport and
follow the installation and operating in-
structions in this manual. In the event of
any damage or malfunction, please con-
tact the reseller or Lanaform directly. In
the event of any complaint, you will need
the model of the device, serial number, date
of purchase, your details and your address.
02 Contents of the package
• 1 pulse oximeter
• 2 AAA batteries (supplied)
• 1 set of instructions for use
• 1 storage bag
• 1 carrying cord
03 Symbols
The following marks and symbols may
appear in the instructions for use, on the
PO-100 and its accessories.
SYMBOL DESCRIPTION
Type BF applied part.
Due attention required.
Action that is prohibited.
Information about
the manufacturer.
Date of manufacture.
Consult the instruc-
tions for use.
This product also complies
with the requirements of di-
rective MDD93/42/EEC.
SYMBOL DESCRIPTION
Electrical waste must be
sent to a specialist collec-
tion point for recycling.
Level of protection against
water penetration.
Warning
Misuse of the device can
damage the oximeter or
cause physical injury.
Please
note
Misuse of the device can
damage the oximeter or
cause inaccurate readings.
%SpO2
Symbol of oxygen saturation
bpmPR
Symbol of pulse rate
No SpO2
alarms.
04 Safety precautions
Read the following precautions care-
fully before using the pulse oximeter.
Please note
•
Do not try to maintain the oximeter
unless you are a qualified profes-
sional. Only qualied maintenance
professionals are authorised to carry
out internal maintenance if necessary.
• The oximeter might not run if you have
poor blood circulation. Rub your nger
to increase circulation or put the de-
vice on another nger.
•
Do not use the device for more than
30 minutes without changing ngers.
• -This product is not suitable for exam
ining new-borns.
• Seek prompt medical treatment if the
value measured is beyond the normal
range and you are sure that the instru-
ment is not malfunctioning.
•
Do not expose your eyes directly to
the electroluminescent components
of the oximeter because this might
cause damage.
•
For further details on clinical limits and
contraindications, please read the rel-
evant medical documentation carefully.
•
The following factors may disrupt or
aect the accuracy of the examination:
∙
This product is used in an environment
involving high-frequency devices.


Product specificaties

Merk: Lanaform
Categorie: Niet gecategoriseerd
Model: PO-100

Heb je hulp nodig?

Als je hulp nodig hebt met Lanaform PO-100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Lanaform

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd