La Crosse Technology WS9032 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WS9032 (16 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
19
Stand
LCD Display
Function keys
WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this state-of-the-art weather station as an example of
innovative design and quality piece of engineering. Providing radio controlled time, date,
calendar, Moon phase, indoor and outdoor temperature, indoor and outdoor relative
humidity, and air pressure history information. This unit will never keep you guessing on
current and future weather conditions. Operation of this product is simple and
straightforward. By reading this operating manual, the user will receive a better
understanding of the Weather Station together with the optimum benefit of all its features.
FEATURES:
The Weather Station
DCF Radio controlled time with manual setting option
Time reception ON/OFF (user selectable)
12/24 hour time display
Time zone option ±12 hours
Battery
compartment
Hanging hole
« Instant Transmission+» is the up and coming state-of-the-art new wireless
transmission technology, exclusively designed and developed by LA
CROSSE TECHNOLOGY.
“IT +” offers you an immediate update of all your outdoor data measured
from the transmitters: follow your climatic variations in real-time!
20
Weekday and day calendar display (year and month only in setting mode)
Alarm setting with snooze function
Display 12 Moon phases throughout the year
Weather forecasting with weather tendency indicator
Indoor comfort indicator
Temperature display in ºC/ºF
Indoor and outdoor temperature display with MIN/MAX records and time of reception
Humidity data display as RH%
Indoor and outdoor humidity display with MIN/MAX records
Relative air pressure hPa/ inHg with adjustable reference value
Weather icon sensitivity setting
Relative air pressure history for the past 24 hours (electronic barometer with
barometric pressure trend)
LCD contrast selectable
Wireless transmission at 868 MHz
Signal reception intervals at 4 seconds
Can receive up to 3 outdoor transmitters
LED back light
Low battery indicator
Table standing or wall mounting
Thermo-Hygro Transmitter
Remote transmission of outdoor temperature and humidity to
weather station by 868 MHz signals
Wall mounting case
TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The Weather Station uses 3 x AA, IEC LR6, 1.5V batteries. To
install and replace the batteries, please follow the steps
below:
1. Insert finger or other solid object in the space at the
bottom center of the battery compartment and lift up to
remove the cover.
2. Insert batteries observing the correct polarity (see
marking).
3. Replace compartment cover.
TO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO
TRANSMITTER
The Thermo-Hygro Transmitter uses 2 x AA, IEC, LR6, 1.5V batteries. To install and replace
the batteries, please follow the steps below:
21
1. Remove the cover.
2. Insert the batteries, observing the correct polarity (see marking).
3. Replace the battery cover.
Note:
In the event of changing batteries in any of the units, all units need to be
reset by following the setting up procedures. This is due to a random
security code assigned by the transmitter at start-up. This code must be
received and stored by the Weather Station in the first 3 minutes of power
being supplied to the transmitter.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum
accuracy of these units.
Please participate in the preservation of the environment. Return used
batteries to an authorized depot.
SETTING UP
WHEN ONE TRANSMITTER IS USED
1. First, insert the batteries in the transmitter (see “How to install and replace batteries
in the Termo-hygro outdoor transmitter ” above).
2. Within 2 minutes of powering up the transmitter, insert the batteries in the Temperature
Station (see ” above). How to install and replace batteries in the Weather Station
Once the batteries are in place, all segments of the LCD will light up briefly and a short
signal tone will sound. Following the indoor temperature/humidity and the time as 0:00
will be displayed. If these information are not displayed on the LCD after 60 seconds,
remove the batteries and wait for at least 60 seconds before reinserting them. Once
the indoor data is displayed user may proceed to the next step.
3. After the batteries are inserted, the Weather station will start receiving data signal from
the transmitter. The outdoor temperature and humidity data should then be displayed
on the Weather station. If this does not happen after 2 minutes, the batteries will need
to be removed from both units and reset from step 1.
4. In order to ensure sufficient 868 MHz transmission however, the distance between the
Weather Station and the transmitter should not be more than 100 meters (see notes on
”). Positioningand “868 MHz Reception
Note:
In the event of changing batteries of the units, ensure the batteries do not spring free from
the contacts. Always wait at least 1 minute after removing the batteries before reinserting,
otherwise start up and transmission problems may occur.
WHEN MORE THAN ONE TRANSMITTER IS USED
1. User shall remove all the batteries from the Weather Station and transmitters, and wait
60 seconds.
2. Insert the batteries in the first transmitter.
3. Within 2 minutes of powering up the first transmitter, insert the batteries in the Weather
Station. Once the batteries are in place, all segments of the LCD will light up briefly
and a short signal tine will sound. Following the indoor temperature/humidity and the
time as 0:00 will be displayed. If these information are not displayed on the LCD after
60 seconds, remove the batteries from both units and wait for at least 60 seconds
before reinserting them.
4. The outdoor temperature and humidity data from the first transmitter (channel 1)


Product specificaties

Merk: La Crosse Technology
Categorie: Weerstation
Model: WS9032
Kleur van het product: Aluminium
Ingebouwd display: Ja
Breedte: 117.4 mm
Diepte: 31.2 mm
Hoogte: 227.1 mm
Meeteenheid temperatuur: F, °C
Accu/Batterij voltage: 1.5 V
Alarm functie: Ja
Beeldscherm, aantal kleuren: Monochroom
Batterij bijna leeg-indicatie: Ja
Klok functie: Ja
Meetfuncties: Indoor hygrometer, Indoor thermometer, Outdoor barometer, Outdoor hygrometer, Outdoor thermometer
Meetfuncties trend display: Barometer, Hygrometer, Thermometer
weerstation extremum data: Thermometer
Weersvoorspelling: Ja
Type batterij: AAA, AA
Aantal batterijen (receiver): 3
Min/Max temperatuur geheugen: Ja
Vochtigheid meetbereik (buiten) (H-H): 1 - 99 procent
Temperature measurement range (outside) (T-T): -30 - 70 °C
Aantal batterijen (sensor): 2
Temperature measurement range (inside) (T-T): -10 - 60 °C
Oudoor sensorbereik: 100 m
Maanfase: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology WS9032 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation La Crosse Technology

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation