La Crosse Technology WS-9160U-IT Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WS-9160U-IT (6 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
WS- -9160U IT www.lacrossetechnology.com/support Page | 1
Model: WS- - 9160U IT
Instruction Manual
DC: 112515
WIRELESS THERMOMETER
Battery
compartment
2 “AA
batteries
TX29U- IT
Temperature
Sensor
2-“AAA”
batteries
Indoor
Temp.
Wall
Hang
Hole
Pull out
stand
Manual
set time
Outdoor
Temp. w/
C hannel
indicator
WS- -9160U IT www.lacrossetechnology.com/support Page | 2
G et Started
Step 1: Insert 2 fresh AA, batteries into the TX29U- IT
sensor according to the polarity marked in the battery
compartment.
Step 2: Insert 2 fresh AAA, Alkaline batteries into the wireless
thermometer . according to the polarity markings
Step 3: After 5 minutes place sensor outside in a shaded location.
Set 12/24 Hour, Temperature Units, Time
1. the button Hold SET to enter time set mode.
2. the Press +button to adjust values.
3. Press the SET button to confirm adjustments and move to next
item.
Settings order:
1. 12/24 Hour Format
2. Hour
3. Minutes
Note: 12h = ºF & 24hahrenheit = ºCelsius
Press SET to exit, or wait 30 seconds without pressing buttons to
return to the normal time display.
Fahrenheit/Celsius
The temperature is displayed in Fahrenheit when in 12-hour time
format and in -Celsius in 24 hour time format. Use the SET menu
above to select 12-hour or 24 hour time format.-
1. Hold the button to enter time set mode.SET
2. 12h or 24h will flash.
3. Press the + button to change the time format
(temperature display).
4. Press the button to confirm.SET
Note: 12h = ºFahrenheit & 24h = ºCelsius
WS- -9160U IT www.lacrossetechnology.com/support Page | 3
Low
Battery
Icons
View/Reset MIN/MAX Readings
1. Press the MIN/MAX button once to view the minimum indoor
and outdoor temperature.
2. Press the MIN/MAX button once more to view the maximum
indoor and outdoor temperature.
3. Hold the MIN/MAX button for 3 seconds to reset all MIN/MAX
temperatures.
Note: When using multiple sensors, press the CH button then the
MIN/MAX button to view the MIN/MAX reading on a different
channel
Outdoor Temperature Reception Icon/Channel Indicator
The outdoor temperature reception icon will flash every
second when searching for the sensor.
Once connected, reception icon will show for 3 seconds
once the outdoor temperature update is received.
The channel indicator will show below the outdoor
temperature.
Press the CH button to view sensors on other channels.
Note: Channel 1 will not show if only one sensor is
connected.
Setup with Multiple Sensors
1. Insert batteries into sensor 1
2. Insert batteries into wireless thermometer
3. When outdoor temperature appears, insert batteries into
sensor 2
4. When channel 2 appears insert batteries into sensor 3
5. Keep station and all sensors together for 15 minutes.
Low Battery Icon
When the TX icon is displayed replace
batteries in the outdoor sensor.
When the RX icon is displayed replace
batteries in the wireless thermometer .
Outdoor
Reception
Icon
2
Outdoor
Channel
Icon


Product specificaties

Merk: La Crosse Technology
Categorie: Weerstation
Model: WS-9160U-IT

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology WS-9160U-IT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation La Crosse Technology

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation