La Crosse Technology WS-9049U-IT Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WS-9049U-IT (8 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Model: WS- -9049U IT www.lacrossetechnology.com/support Page | 1
Model: WS- - 9049U IT
Instruction Manual
DC: 082415
Wireless Forecast Station
with Pressure History
Foldout
Stands
Indoor Temp,
Humidity +
Comfort Icon
Outdoor
Temperature
ºF/ºC + Channel
Indicator
Time +
WWVB Icon
Forecast Icon +
Tendency
BUTTONS
Date, Alarm
Time, Moon
Phase
FRONT
VIEW
24 hour
Pressure
History Graph
Battery
Compartment
2 “C” batteries
TX29UDTH-IT
Remote Sensor
BACK
VIEW
Model: WS- -9049U IT www.lacrossetechnology.com/support Page | 2
Get Started
Step 1: Insert the 2 new Alkaline batteries (not included) into the “C
weather station. Observe the correct polarity.
Step 2: Insert 2 new AA batteries (not included) into thethe
TX29UDTH IT remote sensor. Observe the correct polarity. -
Step 3: After 5 minutes place the sensor outside in a shaded location.
If there is no remote temperature data after 3 minutes, unplug the AC adapter
and remove batteries from the weather station & remote sensor for 5 minutes.
Return to above.Step 1
Set Time, Date, Temperature Unit
1. Hold the button to enter SET mode. SET
2. Press button to adjust the values.the OUT/+
3. Press button to confirm adjustments and move to the next the SET
item.
Time setting order:
1. - Contrast 1 7
2. Time Zone 7 time zones-
3. DST (Daylight Saving Time On/Off)
4. RCC ON/OFF (WWVB signal)
5. 12/24 hour time format
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit/Celsius
12. InHg or hPa (Pressure unit of measure)
13. Relative pressure
14. Forecast Sensitivity (low for ocean, high for desert)
Press button to exit, or the SET wait 20 seconds without pressing
buttons to return to the normal time display.
Set Time Alarm
1. Hold the ALM/DATE button to enter alarm
SET mode. Hours and minutes will flash
together.
2. Press button to set the hour and the button to adjust the IN OUT/+
the minutes.
3. Press button to confirm & exit.the SNOOZE/CH
This clock has time zones
from GMT 0 to +/- 12h
North American time zones:
-4 - Atlantic h
- - Eastern (default) 5 h
- - Central 6 h
- - Mountain 7 h
- - Pacic 8 h
- Alaska 9 h
- -Hawaiian10 h
Model: WS- -9049U IT www.lacrossetechnology.com/support Page | 3
Activate/Deactivate Time Alarm
ACTIVATE: Press and release the ALM/DATE button to toggle
between the alarm and day/date. When the alarm time
and alarm icon are showing to the right of the moon
phase, the alarm is activated.
DEACTIVATE ALARM: Press and release the ALM/DATE
button and alarm icon will disappear. When the day and
date are showing, the alarm is deactivated.
Snooze (Silences Alarm Temporarily)
When the time alarm sounds, press and release the
SNOOZE/CH button. The snooze will be activated for
10 minutes.
Press and release any button, other than the button to SNOOZE/CH
silence the alarm.
Note: The alarm is crescendo sound. The alarm sounds for 2 minutes
and then shut off completely.
Moon Phase
The moon phase is based on the year, month and date, set manually or
set by the WWVB signal.
Forecast Icons
The forecast station uses changing atmospheric pressure to predict
weather conditions for the next 12 hours with 70 75% accuracy. - -
Alarm
Icon
Sunny Partly Sunny Rainy


Product specificaties

Merk: La Crosse Technology
Categorie: Weerstation
Model: WS-9049U-IT

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology WS-9049U-IT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation La Crosse Technology

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation