La Crosse Technology WS-7015 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WS-7015 (12 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Operation Manual
Professional Remote Weather Station WS-7015
This Operation Manual is part of this product and must stay with it. It contains
important notes on setup and operation. Please keep that in mind when handing
this product over to any third party.
A Table of Contents can be found on Page 27 of this manual.
Keep this Operation Manual in a safe place for further reference.
1. Introduction
Dear Customer,
We want to thank you for purchasing this Professional Remote Weather Station.
Its design and construction corresponds to all United States requirements with regard to
electro magnetic compatibility. The unit carries the FCC sign, its conformity has been
proven, the respective depositions and documents are deposited with the manufacturer.
In order to maintain this condition and ensure safe operation the user must observe this
operation manual!
With this product you have purchased a device that has been designed using the latest
technologies. Its operation is simple and straight forward. For better understanding and
optimum use of this product however please read this manual closely and carefully.
2. Intended Use
This Professional Remote Weather Station serves to acquire and process weather data
such as wind direction and strength, precipitation, air pressure, temperature and humidity
around the home and office. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur, should any
inaccurate reading take place. This product is not to be used for medical purposes or for
public information. This product has been designed for strict use in the home and office
as an indicator of the future weather conditions and is not 100% accurate. Weather
forecasts and barometric readings given by this product should be taken only as an
indication and not as being totally accurate.
The Base Station is approved for operation with four Type Mignon AA, IEC LR6, 1.5V
batteries. The Base Station is to be used within dry, closed rooms only; outdoor use is not
permitted. Contact to moisture must be avoided in any case. The Remote Indoor Sensor
operates on two Mignon AA, IEC LR6, 1.5V batteries, all other sensors receive their
operating power from solar cells with rechargeable Lithium battery backup (included).
Any other use outside the above described will lead to damage of this product. It is
further connected with dangers such as short circuit, fire, electrical shock, etc. The
entire product may not be opened, altered or modified in any way!
Table of Contents
Pages
1. Introduction……………………………………………………………. 26
2. Intended Use…………………………………………………………… 26
3. Safety Notes……………………………………………………………. 28
4. Product Description…………………………………………………... 28-29
5. Shipment Contents…………………………………………………… 30
6. Description of Measuring Devices…………………………………. 30-31
7. Mounting………………………………………………………………… 31-34
8. Setting Up………………………………………………………………. 34-36
9. Display Overview……………………………………………………… 37
10. Operation……………………………………………………………….. 38-41
11. Programming Mode…………………………………………………… 41-42
12. Calibration………………………………………………………………. 42-45
13. Battery Change………………………………………………………… 45-46
14. Interferences…………………………………………………………… 46-47
15. Transmission Range………………………………………………….. 47
16. Cleaning and Maintenance…………………………………………... 47
17. Disposal…………………………………………………………………. 48
18. Specifications………………………………………………………….. 48
3. Safety Notes
Any damages caused by failure to comply with this Operation
Manual will lead to invalidation of guarantee! We furthermore
cannot be held liably for any conseqential damages causes by
this!
In case of damages to personnel or property caused by improper
handling or failure to comply with the safety notes in this manual
we cannot be held liable. In any such case the guarantee will
invalidate.
For reason of safety and licensing (FCC) any modification and/or alteration of the device
is strictly forbidden.
Only Type Mignon AA, IEC LR6, 1.5V batteries (preferrably alkaline batteries) may be
used to power the Indoor Sensor and Base Station.
Do not expose the Base Station to high temperatures, moisture or severe vibration as well
as to any mechanical stress.
Do not leave used-up batteries in the device since even leakproof batteries may corrode
and set free chemicals which may be dangerous to your health and may also ruin the
device.
Incorrect polarity of the batteries will in any case lead to immediate destruction of the unit.
This product as well as the installed batteries are no toys and must be kept out of the
reach of children.
Do not expose batteries to open fire because of danger of explosion.
This product is not to be used for medical purposes or for public information.
Do not put the Base Station into operation immediately after it has been moved from any
cold environment to a warm room. The condensed water possibly developing may under
unfavorable conditions damage the device. Leave the device switched off until it has
reached room temperature.
4. Product Description
The Professional Remote Weather Station represents an extremely comfortable high
quality Universal Weather System able to collect, process and display data from up to 9
external Remote Temperature and Humidity Sensors as well as one Remote Wind Sensor
and one Remote Rain Volume Sensor.
Measuring capabilities of the Weather Station
- Room temperature and humidity with air pressure as well as one of 8 further
temperatures with assigned humidity.
- Temperature selectable in degree Fahrenheit or Celsius
- Up to 9 different combined humidity/temperature measuring points of which two can
be simultaneously displayed.
- Calculation and display of the windchill equivalent temperature (perceived
temperature).
- Dew points, which are separately computed for every one of the 9
temperature/humidity sensors.
- Air pressure, selectable in inHg or hPa.
- Air pressure tendency (constant, increasing, strongly increasing, decreasing,
strongly decreasing).
- Graphic display of the air pressure changes within the last 24 hours.
- Icon display for weather forecast (sunny, bright, cloudy, rainy).
- Wind strength, selectable in mph, km/h, m/s, knots or Beaufort.
- Wind direction in form of a compass with display of the variations of wind direction
(in place of the wind strength the wind direction can be displayed with a 5º
resolution).
- Storage of minimum and maximum measured values for all sensors incl. assigned
time and date assertion (in case of wind strenght the assigned wind direction is
additionally displayed).
- Acquisition of rain volume with < 0.5 mm resolution (total, 24h, 1h).
- Programmable alarm cababilities at various weather conditions, e.g. danger of frost,
storm, adverse air pressure or temperature tendencies, e.g. at sea or in the
mountains or as an indication for the so called bio weather.
- All important weather informations are simultaneously displayed on the LCD, making
it unnecessary to perform any special handling of the device to recognize the
present weather.
- Several Base Stations can be operated simultaneously in order to display the sensor
data at various places at the same time. Additional Base Stations can be ordered
optionally.
Please read this Operation Manual carefully and completely before first setup in
order to avoid functional disturbances and mishandling.
Especially observe the notes on mounting and calibration of the measurement
sensors.
The indoor and outdoor sensor system of the Weather Station works by exclusive use of
remote data transmission. Remote sensors can thus be placed and mounted as far as
330 ft (100 m) from the Base Station in open field (strongly depending on the local
environmental conditions).
The outdoor sensors get their operating power from integrated solar cells. Please
therefore carefully observe the notes on placing and mounting of these components in
order to guarantee regular function of the total system.
Note!
Please note that for operation of the Weather Station there is at least one Remote
Sensor necessary since the Base Station itself does not contain any sensors.
5. Shipment Contents
Before setting up the Weather Station please check the shipment‘s entirety by use of the
following list.
Unit consisting of Fittings Picture
Base Station see cover
Remote Wind
Sensor Sensor Head 1 x Magnet 4Dia.x15
Holder Tube 2 x Bracket for Mast Holder
Mast/Wall Holder 4 x Washer 15Dia. for M6
4 x Nut M6
2 x Screw M3.5x6x0.6
2 x Screw M3.5x12x0.6
Remote Rain Volume
Sensor 1 x Magnet 4Dia.x15
8 x Screw 3.5Dia.x30 incl. Dowel
Remote Indoor Sensor
Remote Outdoor
Sensor Sensor Head 1 x Magnet 4Dia.x15
Mast/Wall Holder 2 x Bracket for Mast Holder
4 x Washer 15Dia. for M6
4 x Nut M6
2 x Screw M3.5x6
4 x Screw 5Dia.x55 incl. Dowel
6. Description of Measuring Devices (Sensors)
The sensor concept of the Professional Remote Weather Station consists of two sensor
groups. For operation of the Weather Station a Remote Indoor Sensor is generally
necessary. It transmits a fixed data telegram determining the display of temperature and
humidity in the display section for the indoor values in the upper left part of the LCD. The
sensor is immediately operable since addressing is only necessary in very rare
exceptional cases.


Product specificaties

Merk: La Crosse Technology
Categorie: Weerstation
Model: WS-7015

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology WS-7015 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation La Crosse Technology

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation