La Crosse Technology WS-1913U-IT Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WS-1913U-IT (21 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
1
WS- U- WEATHER CENTER 1913 IT
Instruction Manual
Congratulations on purchasing this state- - -art weather station as an example of excellent design and of the
innovative measuring technique. Featuring time, date, calendar, weather forecast, wind gust and wind
speed, indoor/outdoor temperature and outdoor humidity, air pressure and rainfall (optional), this weather
station will provide you with various weather information and weather forecast. Pages after pages, you
will discover that the operation of your weather station is simple!
INSTANT TRANSMISSION is the state- -the-art new of
wireless transmission technology, exclusively designed
and developed by LA CROSSE TECHNOLOGY. INSTANT
TRANSMISSION oers you an immediate update (every
4.5 seconds!) (6.25 seconds for rain sensor - optional) of
all your outdoor data measured from the transmitters:
follow your climatic variations in real-time!
This product oers:
2
INVENTORY OF CONTENTS
1. Wireless Weather Station WS- - 1913U IT
2. Wireless Thermo-hygro Sensor (TX31U-IT) and Wind Sensor (TX55U-IT) with mounting bracket.
3. Instruction Manual
FEATURES:
The Weather Station
Time display (manual setting)
12/24 hour time display
Calendar display (weekday, date, month)
Weather forecast icons and weather tendency indicator
Indoor temperature display in °C/ºF
Outdoor temperature display in °C/ºF
Outdoor Humidity display as RH%
Dew point displayed in °C or °F
Wind chill displayed in °C of °F
Wind gust displayed in km/h, mph or m/s
Wind speed displayed in km/h, mph or m/s
24-hour and total rainfall displayed in mm or inch (optional)
Display MIN/MAX value of outdoor temperature, outdoor humidity, dew point, wind chill, and relative
air pressure, with time & date of recording
Display MAX wind speed and gust with time & date of recording
Relative air pressure displayed in hPa or inHg
Air pressure tendency indicator for the past 12 hour (bar graph format)
Manual reset of outdoor temperature/ humidity, pressure and wind chill data
LCD contrast selectable
Low battery indicator
Storage of 140 sets of history weather data recorded in 3-hour intervals
Wireless transmission at 915 MHz
Transmission range up to 330 feet/100 meters
The Thermo-hygro Transmitter
Remote transmission of the outdoor temperature and humidity to the Weather Center at 915
MHz (open air)
Rain resistant casing
Wall mounting case (to be mounted vertically in a sheltered place. Avoid direct rain and
sunshine)
The Wind sensor
Connected to the thermo-hygro transmitter by cable
Can be installed onto a mast or a horizontal panel (with the cups on the
bottom)
The TX32U-IT rain sensor (optional- sold separately)
Function keys
LCD
Battery
compartment
cover
3
Cable connection between the wind
sensor and the thermo-hygro
Wireless
transmission at 915
MHz - thermo-hygro
transmitter to
weather station
Weather center
Wind sensor
Rain sensor (optional)
Thermo-hygro
transmitter
Remote transmission of the rainfall data to the Weather Center at 915 MHz
To be mounted onto a horizontal panel
SET UP:
IMPORTANT:
- Do Not Mix Old and New Batteries
- Do Not Mix Alkaline, Standard, or Rechargeable Batteries
NOTE:
When rst operating the Weather Station, it is important to completely set-up the wiring and the rest of the
system in close proximity (e.g. on a table 5ft-10ft from display) and test all components for correct
function before mounting them at their nal destinations (See Positioning below) (Allow all sensors to sit
with the display unit for 15 minutes before mounting)
1. First, unwind the cables of the Wind sensor. Connect the Wind sensor to the Thermo-hygro
transmitter by plugging the connector head into the socket of the Thermo-hygro sensor. Be sure the
cord “clicks” into place.
2. Next, insert the batteries into the Thermo-hygro sensor and Rain sensor (optional - purchased
separately) See “ and How to install and replace the batteries into the Thermo-hygro sensor
“ ”How to install and replace the batteries into the Rain sensor (optional) below.
3. Then insert the batteries into the Weather Center (See “How to install and replace the batteries
into the Weather Center )below . Once the batteries are installed, all segments of the LCD will light
up briey. It will then display the time as 12:00, the date as 1.1.09, the weather icons, and air
pressure value. "- - -" will be shown for outdoor data.
4. The Weather Center will start receiving data from the transmitter. The transmission reception icon will
be blinking to indicate that the station is trying to get the thermo-hygro transmitter data. The outdoor
temperature, humidity, wind data will be displayed on the Weather Center. If this does not happen
after 135 seconds, remove the batteries from all units. You will have to start again from step 2.
5. The transmitter reception icon is now blinking again to indicate that the station is trying to get the rain
sensor data. It will stop blinking once the rain sensor has been detected. If this does not happen after
135 seconds, you will need to start again from step 2. (optional rain gauge).
Socket for
wind


Product specificaties

Merk: La Crosse Technology
Categorie: Weerstation
Model: WS-1913U-IT

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology WS-1913U-IT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation La Crosse Technology

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation