La Crosse Technology 308-1910M Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 308-1910M (2 pagina's) in de categorie Thermometer. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Wireless Thermometer
Model: - | Instruction Manual 308 1910
View temperature with a glance. Precise real-time indoor and
outdoor temperature with MIN/MAX readings in Fahrenheit or
Celsius, manual set time and alarm with snooze.
SETUP INSTRUCTIONS STEP BY STEP
STEP 1:
Ensure that the transmitter is within 10 feet of the
Wireless Thermometer.
Remove battery cover from TX19 transmitter.
Insert 2 new AAA batteries (not included) into the
transmitter. Observe the correct polarity.
STEP 2:
Remove battery cover from the Wireless
Thermometer (follow the arrow on the bottom of the battery
cover).
Insert 2 new A batteries (not included) into AA
the back of the Wireless Thermometer.
Observe the correct polarity (see marking
inside the battery compartment).
Within 3 minutes, the Wireless Thermometer
will show readings in the outdoor temperature
area on the wireless thermometer.
Note: Allow the Wireless Thermometer and
the transmitter to stay within 10 feet of each
other for the rst 15 minutes of set up.
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
TROUBLE SHOOTING
If the Wireless Thermometer does not display the outdoor
temperature after 3 minutes, remove the batteries from both units
and repeat the setup process.
From normal display, hold the UP ARROW button for 3 seconds
to search for the outdoor temperature transmitter.
For optimal 433MHz signal reception, the outdoor transmitter
should be placed within 100 feet (30 meters) from the indoor
Wireless Thermometer.
The outdoor temperature reception icon willash:
During initial setup, for up to three minutes, until it
connects with the transmitter.
About every minute afterwards as the wireless
thermometer receives an update.
When the UP ARROW button is held for 3 seconds to begin a
search for the transmitter.
SET TIME
From Time m , hold the TIME button for 3 seconds to enter time ode
set mode.
The Hour will ash. Press and release the ARROW HOUR:
buttons to select the correct hour. Press and release the TIME
button once to move to the minutes.
MINUTES: The Minutes will ash. Press and release the
ARROW buttons to select the correct hour. Press and release
the TIME button once more to exit the program menu.
FAHRENHEIT/CELSIUS
Default temperature reading in Celsius is .
From Time m , press and release the F/°C button to select ode
Fahrenheit temperature readout.
12 HOUR/24 HOUR TIME
Default time format is hour time format. 24
From Time m , press and release the 12/24h button to select ode
12 hour time readout.
LOW BATTERY ICON
The low battery icon will show above the outdoor
temperature when it is time to change batteries.
MAXIMUM/MINIMUM TEMPERATURE READINGS
VIEW: Press and release the MIN/MAX button
once to show the maximum temperature
records. Press and release the MIN/MAX button
again to view the minimum temperatures. Press
and release the MIN/MAX button a third time to
return to current temperature.
RESET: Hold the MAX/MIN key for 2 seconds
to manually clear all the MIN/MAX records.
ALARM SET
From Time m , press and release the ALARM button to switch to ode
Alarm Mode. The letters “AL” will appear between the hours and the
minutes. In Alarm Mode hold the ALARM button for 3 seconds to
enter alarm set mode.
The Hour will ash. Press and release the ARROW HOUR:
buttons to select the correct hour. Press and release the ALARM
button once to move to the minutes.
MINUTES: The Minutes will ash. Press and release the
ARROW buttons to select the correct hour. Press and release
the ALARM button once more to exit the program menu.
Note: When the alarm sounds, it continues for 2 minutes and then
shuts o completely.
SNOOZE
When the alarm sounds, press the SNOOZE button to silence the
alarm for 5 minutes. The alarm icon will ash.
The snooze function can be repeated.
Press any other button to turn the alarm o for 24 hours.
ACTIVATE/DEACTIVATE ALARM
From Time m , press and release the ALARM button to switch to ode
Alarm mode. The letters “AL” will appear between the hours and the
minutes.
ACTIVATE: In Alarm mode, press and release the UP ARROW
button to activate the alarm. The alarm icon will appear.
DEACTIVATE: In Alarm m , with the bell icon visible, press and ode
release the UP ARROW button to deactivate the alarm. The bell icon
disappears.
POSITIONING THE TEMPERATURE TRANSMITTER
The remote temperature transmitter should be mounted vertically to
avoid damage. Place both units in the desired shaded locations, and
wait approximately 1 hour before permanently mounting the
transmitter to ensure that there is proper reception. The outdoor
temperature transmitter is water resistant, not waterproof and should
not be placed anywhere it will become submerged in water or
subject to standing water or snow.
Choose a location for the transmitter that is within range of the
Wireless Thermometer and under an overhang for accuracy.
Secure the bracket onto a desired wall using the
screws and plastic anchors (not included).
Clip the temperature transmitter onto the bracket.
Note: the raised portion of the mounting bracket
should t into the slot on the back of the outdoor
transmitter for a secure mount.
To achieve a true temperature reading, mount where
direct sunlight cannot reach the outdoor transmitter.
Mount the outdoor transmitter on a North-facing wall or
in any well-shaded area. Under an eave or deck rail
work well. The maximum transmitting range in open air
is 100 feet (30 meters). Obstacles such as walls,
windows, stucco, concrete, and large metal objects can
reduce the range. Place the transmitter at least 6 feet
in the air to improve signal transmission.
SPECIFICATIONS
Range:
Indoor Range: 32°F to 122°F (0°C to + 50°C )
Outdoor Range -4°F to 140°F (-20°C to + 60°C) :
Transmission: 100 feet (30 meters) open air.
Power:
308-1910
Wireless Thermometer: 2- A LR3 alkaline batteries AA
(not included)
TX19 Transmitter: 2- A LR3 alkaline batteries AA
(not included)
Battery Life: Battery life is over 12 months when
using reputable battery brands
Dimensions:
308-1910
Wireless Thermometer: 4.134” H x 2.717” W x 1.45 ” D4
(105 H x 69.01 W x 36.93 ) D mm
TX19 Transmitter: 4.213 ” H x 3.465” W x 1.045” D
(wall mounted with bracket) (107.01 H x 88.01 W x 26.54 D mm)
CARE AND MAINTENANCE
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
Do not expose the Wireless Thermometer to extreme temperatures,
moisture, vibration or shock.
Clean the Wireless Thermometer with a soft damp cloth. Do not use
solvents or scouring agents.
This is not a toy. Keep it out of reach of children.
The Wireless Thermometer: is not to be used for medical purpose or for
public information. It is for home use only.
The specications of this product may change without prior notice.
Improper use or unauthorized opening of housing will void the warranty.
If the unit does not work properly, change the batteries.
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this
product against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only
on products purchased and used in North America and only to the
original purchaser of this product. To receive warranty service, the
purchaser must contact La Crosse Technology, Ltd for problem
determination and service procedures. Warranty service can only be
performed by a La Crosse Technology, Ltd authorized service center.
The original dated bill of sale must be presented upon request as proof of
purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s
authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our
option and at no charge as stipulated herein, with new or reconditioned
parts or products if found to be defective during the limited warranty
period specied above. All replaced parts and products become the
property of La Crosse Technology, Ltd and must be returned to La
Crosse Technology, Ltd. Replacement parts and products assume the
remaining original warranty, or ninety (90) days, whichever is longer. La
Crosse Technology, Ltd will pay all expenses for labor and materials for
all repairs covered by this warranty. If necessary repairs are not covered
by this warranty, or if a product is examined which is not in need or
repair, you will be charged for the repairs or examination. The owner
must pay any shipping charges incurred in getting the La Crosse
Technology, Ltd product to a La Crosse Technology, Ltd authorized
service center. La Crosse Technology, Ltd will pay ground return
shipping charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material
and workmanship with the following specied exceptions: (1) damage
caused by accident, unreasonable use or neglect (including the lack of
reasonable and necessary maintenance); (2) damage occurring during
shipment (claims must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4) damage
resulting from failure to follow instructions contained in the owner’s
manual; (5) damage resulting from the performance of repairs or
alterations by someone other than an authorized La Crosse Technology,
Ltd authorized service center; (6) units used for other than home use (7)
applications and uses that this product was not intended or (8) the
products inability to receive a signal due to any source of interference..
This warranty covers only actual defects within the product itself, and
does not cover the cost of installation or removal from a xed installation,
normal set-up or adjustments, claims based on misrepresentation by the
seller or performance variations resulting from installation-related
circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR
DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION
OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR
MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specic legal rights. You may also have other
rights specic to the State. Some States do not allow the exclusion of
consequential or incidental damages therefore the above exclusion of
limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Contact Support: 1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register
On the Web at:
www.lacrossetechnology.com/308-1910
Protected under U.S. Patents:
5,978,738
6,076,044
6,597,990
FCC DISCLAIMER
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any
other antenna or transmitter. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modications to this equipment. Such
modications could void the user authority to operate the equipment.
All rights reserved. This handbook must not be reproduced in any form,
even in excerpts, or duplicated or processed using electronic, mechanical
or chemical procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The
information in this handbook is regularly checked and corrections made in
the next issue. We accept no liability for technical mistakes or printing
errors, or their consequences.
All trademarks and patents are acknowledged.


Product specificaties

Merk: La Crosse Technology
Categorie: Thermometer
Model: 308-1910M

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology 308-1910M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermometer La Crosse Technology

Handleiding Thermometer

Nieuwste handleidingen voor Thermometer