Kyocera TASKalfa MZ4000i Handleiding

Kyocera Printer TASKalfa MZ4000i

Lees hieronder de 📖 handleiding in het Nederlandse voor Kyocera TASKalfa MZ4000i (4 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Before clicking on the button to commence downloading the software “accept and continue”

(“Software”) (“Documentation”)or documentation , you should carefully read the terms and conditions

of this license agreement . By clicking on button you are (“Agreement”) the “accept and continue”

agreeing to legally bound by the terms and conditions of this Agreement and agree to become be

a licensee. If u do not agree to all of the terms and conditions of this Agreement you should click yo

on butt the “cancel” on and not download or use the Software and/or Documentation.

When you accept the terms and conditions of this Licence Agreement, Kyocera Document Solutions

Europe BV (“Licensor”) shall immediately grant you (the "Licensee" meaning either an individual or a

single entity) a limited, non-exclusive, non-transferrable licence to use the Software and/or the

Documentation on the terms of the Agreement.

SOFTWARE

1 Use of Software

1.1 Licensor grants Licensee a license to use one copy of the Software on one or more

computers connected to an original “KYOCERA” printer, copier or multifunctional device. Use

means any permanent or temporary use of the Software and includes the storing, loading,

installing, executing or displaying of the Software or the processing of any data contained

therein. The Software may not be used on any other hardware unless such use is granted by

a separate license agreement.

2 Intellectual Property Rights

2.1 All ownership and intellectual property rights in the Software and any derivative work(s) shall

remain exclusively with the Licensor and/or its licensors. Licensee acknowledges such

ownership rights and will not take any action to jeopardise, limit or interfere in any manner

with Licensor’s rights with respect to the Software. Furthermore, Licensee may not remove or

alter any trademark, logo, copyright or other proprietary notices, legends, symbols or labels in

the Software without the prior written permission of Licensor. Any unauthorized deviation from

this condition will result in automatic termination of the Agreement. Licensor reserves the right

to take legal action for breach of this condition.

3 Rights to copy Software

3.1 Licensee may only copy the Software where this is essential to usage. This includes the

installation and loading of the Software into the temporary memory (i.e. RAM).

3.2 Licensee may make and store one back-up copy if this is necessary for securing later use.

The copy must be marked as such. If the Software is used in the course of business and if

routine back-up copies of all data including the Software are made for the purposes of

securing data and ensuring that the computer system can be reactivated quickly after a

breakdown, only so many back-up copies may be made as are absolutely essential. They

may be used for archival purposes only.

3.3 Licensee may not make any further copies.

3.4 Licensee may not decompile the Software except and only to the extent that such activity is

expressively permitted by law. Licensee may not alter any brand names, serial numbers or

other characteristics identifying the Software or any other legal information.

4 Transfer of Software

4.1 The license will automatically terminate upon any transfer of the Software to a third party. The

transferee will be regarded as a Licensee in the meaning of this contract.

4.2 The Software may only be transferred if the transferee accepts the terms and conditions of

this Agreement. Licensee is obliged to inform the transferee of these terms and conditions. If

Licensee does not have a copy of this Agreement, he may obtain a new one from Licensor at

his own expenses.

4.3 Upon transfer Licensee must immediately destroy any copies of the Software or parts thereof

including any changed or modied copies or parts thereof. This also applies to any back-up

copies.

4.4 Licensee may not rent, lease or subdivide any rights granted by this license or transfer or

grant sublicenses unless explicitly allowed in the Agreement.

5 Limited Warranty

5.1 Subject to the limitations and exclusions of liability below, the Licensor warrants that the

Software will materially conform with any documentation that accompanies it and with any

written descriptions provided by the Licensor.

5.2 Subject to sub-Clause 5.1, the Software is provided «as is» without any warranty of any kind,

whether express or implied, including but not limited to the implied warranties of

merchantability, tness for a particular purpose, title and non-infringement.

5.3 The Licensor does not warrant that the Software will be error-free or that such errors will be

corrected and the Licensee is solely responsible for all costs and expenses associated with

the rectication, repair or damage caused by such errors.

5.4 The Licensor shall not be liable if the Software fails to operate in accordance with the limited

warranty set out in sub-Clause 5.1 as a result of any modication, variation or addition to the

Software not performed by the Licensor or caused by any abuse, corruption or incorrect use

of the Software, including use of the Software with equipment or other software which is

incompatible.

6 Obligations to examine and to notify

6.1 Licensee is obliged to examine the Software for any evident faults. An evident fault means a

fault obvious to the average Licensee. Unless Licensor is notified of such faults within 14 days

of downloading the Software, the warranty will expire.

6.2 Licensor has to be informed of any other fault within fourteen days of its discovery.

6.3 This license does not aect any further obligations of Licensee normally owed in the course of

business.

6.4 If this obligation is violated, Licensee will be deemed to have accepted the Software as

faultless.

DOCUMENTATION

7 Warranty

7.1 Except as expressly provided herein, Licensor excludes all warranties, representations,

terms, conditions or other commitments of any kind, whether express or implied, statutory or

otherwise, and specically disclaims all implied warranties, including (without limitation) any

warranties, representations, terms, conditions or other commitments of merchantability or

tness for a particular purpose or of satisfactory quality or of reasonable skill and care, in

each case, to the maximum extent permitted by applicable law. Without prejudice to the

foregoing, the Documentation is provided ‘as is’, as available and without warranty of any

kind.

7.2 Information and views expressed in the Documentation, including URL and other Internet

Web site references, may change without notice.

7.3 Some examples depicted in the Documentation are provided for illustration only and are

ctitious. No real association or connection is intended or should be inferred.

8 Intellectual Property Rights

8.1 All ownership and intellectual property rights in the Documentation and any derivative work(s)

shall remain exclusively with the Licensor and/or its licensors. Licensee acknowledges such

ownership rights and will not take any action to jeopardise, limit or interfere in any manner

with Licensor’s rights with respect to the Documentation. Furthermore, Licensee may not

remove or alter any trademark, logo, copyright or other proprietary notices, legends, symbols

or labels in the Documentation without the prior written permission of Licensor. Any

unauthorised deviation from this condition will result in automatic termination of the

Agreement. Licensor reserves the right to take legal action for breach of this condition.

9 Rights to copy Documentation and use of it

9.1 Licensee may copy and use this document for its internal, reference purposes. The

Documentation is provided to Licensee for Licensee's own use and not for re-sale.

SOFTWARE AND DOCUMENTATION

10 Liability

10.1 Licensor’s total liability to Licensee for breach of this Agreement or tort is limited to the license

fee paid by the Licensee for the Software and/or Documentation. Parties agree that the

Licensor has no liability for incidental or consequential damages i.e. loss of profits, loss of

savings, or loss caused by interruption of operations.

10.2 Licensor is not liable to Licensee, under contract, tort, or otherwise, for any:

a) Loss of prot; or

b) Loss of goodwill; or

c) Loss of business; or

d) Loss of business opportunity; or

e) Loss of anticipated saving; or

f) Loss or corruption of data or information; or

g) Other special, indirect or consequential damage.

10.3 The limitations of liability set out in in this Article do not apply if the damages are the result of

Licensor’s wilful intent or deliberate recklessness.

11 Term and Termination of the Agreement

11.1 This Agreement comes into eect as soon as the Licensee has accepted the terms of this

Agreement by clicking on the button. “accept and continue”

11.2 e the Software and/or Documentation terminate This license and Licensee’s right to us

automatically if Licensee is in breach of any term of this Agreement.

11.3 Both Licensor and Licensee may terminate this Agreement by a fourteen (14) days written

notice.

11.4 In the event of termination, Licensee must destroy the original and all copies of the Software

and/or Documentation and certify the destruction to Licensor.

12 No other applicable agreements, written form

12.1 This Agreement governs the contractual relation between Licensor and Licensee with regards

to the contractual obligation established by this license. There are no further agreements. Any

prior contracts or agreements are null and void upon acceptance of this Agreement.

12.2 Any amendment to this Agreement must be made in writing.

13 Notices

13.1 Any notication to Licensor shall be made in writing to the following address:

KYOCERA DOCUMENT SOLUTIONS EUROPE B.V.

Bloemlaan 4

2132 NP Hoofddorp, the Netherlands

14 Governing law and jurisdiction

Product specificaties

Merk:	Kyocera
Categorie:	Printer
Model:	TASKalfa MZ4000i
Soort bediening:	Touch
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	58000 g
Breedte:	594 mm
Diepte:	696 mm
Hoogte:	683 mm
Frequentie van processor:	1600 MHz
Ethernet LAN:	Ja
Markt positionering:	Bedrijf
Stroomverbruik (in standby):	100 W
Intern geheugen:	4096 MB
Ondersteund beeldformaat:	JPEG,TIFF
Type processor:	Ja
Ondersteunt Windows:	Ja
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.5 Leopard,Mac OS X 10.6 Snow Leopard,Mac OS X 10.7 Lion,Mac OS X 10.8 Mountain Lion,Mac OS X 10.9 Mavericks,Mac OS X 11.0 Big Sur
Maximale resolutie:	1200 x 1200 DPI
Printkleuren:	Zwart
Papierlade mediatypen:	verbinding-papier
Opwarmtijd:	18 s
Printtechnologie:	Laser
Printsnelheid (zwart, standaardkwaliteit, A4/US Letter):	40 ppm
Printen:	Zwart-wit afdrukken
Duplex printen:	Ja
Gebruiksindicatie (maximaal):	- pagina's per maand
Kopieën vergroten/verkleinen:	25 - 400 procent
Tijd voor eerste kopie (zwart, normaal):	5.6 s
Maximale kopieerresolutie:	600 x 600 DPI
Kopiëren:	Zwart-wit kopiëren
Scannen:	Scannen in kleur
Soort scanner:	ADF-scanner
Optische scanresolutie:	600 x 600 DPI
Ondersteunde documentformaten:	PDF,XPS
Modemsnelheid:	33.6 Kbit/s
Faxresolutie (zwart):	400 x 400 DPI
Faxen:	Zwart-wit faxen
Totale invoercapaciteit:	1000 vel
Maximum invoercapaciteit:	4100 vel
Totale uitvoercapaciteit:	300 vel
Maximale uitvoercapaciteit:	3200 vel
Maximale ISO A-series papierformaat:	A3
ISO A-series afmetingen (A0...A9):	A3,A4,A5,A6
Direct printen:	Ja
Tijdsduur tot de eerste pagina (zwart, normaal):	4.2 s
Gemiddeld stroomverbruik tijdens printen:	600 W
Totaal aantal invoerladen:	2
Papierlade mediagewicht:	60 - 163 g/m²
Maximale printafmetingen:	297 x 432 mm
ISO B-series afmetingen (B0...B9):	B5
Non-ISO print papierafmetingen:	Folio (media size),Legal (media size),Letter (media size)
Grijsniveaus:	256
Duplex scannen:	Ja
Maximaal aantal kopieën:	9999 kopieën
Multifunctionele ladecapaciteit:	100 vel
Multifunctionele lade:	Ja
Scan naar:	E-mail,FTP,SMB,TWAIN,USB,WIA
Printsnelheid (zwart, standaard, A3):	21 ppm
Papierlade 2 invoercapaciteit:	500 vel
Duplex functies:	Fax,Print
N-in-1 copy function (N=):	2,4
Printerlettertypen:	Bitmap,PCL,Windows
N-in-1 kopieerfunctie:	Ja
Kopieerfunctie voor identiteitsbewijzen:	Ja
Multifunctionele lade papiergewicht:	45 - 256 g/m²
Papierlade 1 invoercapaciteit:	500 vel
Maximale kopieerformaat:	A3