Kyocera FS6020 Handleiding
Lees hieronder de đź“– handleiding in het Nederlandse voor Kyocera FS6020 (110 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/110
FS-6020
Page Printer
Operation Guide
1
Please read the Operation Guide before using the printer.
Keep it close to the printer for easy reference.
The sections of this guide and parts of the printer marked with
symbols are safety warnings meant to protect the user, other
individuals and surrounding objects, and ensure correct and
safe usage of the printer. The symbols and their meanings are
indicated below.
WARNING: Indicates that serious injury or even death may
result from insufficient attention to or incorrect compliance with
the related points.
CAUTION: Indicates that personal injury or mechanical
damage may result from insufficient attention to or incorrect
compliance with the related points.
Symbols
The symbol indicates that the related section includes safety
warnings. Specific points of attention are indicated inside the
symbol.
........[General warning]
........[Warning of danger of electrical shock]
........[Warning of high temperature]
The symbol indicates that the related section includes
information on prohibited actions. Specifics of the prohibited
action are indicated inside the symbol.
........[Warning of prohibited action]
.........[Disassembly prohibited]
The symbol indicates that the related section includes
information on actions which must be performed. Specifics of
the required action are indicated inside the symbol.
.........[Alert of required action]
........[Remove the power plug from the outlet]
........[Always connect the printer to an outlet
with a ground connection]
Please contact your service representative to order a
replacement if the safety warnings in the guide are illegible or if
the guide itself is missing. (fee required)
Caution
NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY
IMPROPER INSTALLATION.
Notice on Software
SOFTWARE USED WITH THIS PRINTER MUST SUPPORT
THE PRINTER’S EMULATION MODE. The printer is factory-set
to emulate the PCL. The emulation mode can be changed by
following the procedures described in Chapter 1.
Notice
The information in this guide is subject to change without
notification. Additional pages may be inserted in future editions.
The user is asked to excuse any technical inaccuracies or
typographical errors in the present edition.
No responsibility is assumed if accidents occur while the user is
following the instructions in this guide. No responsibility is
assumed for defects in the printer’s firmware (contents of its
read-only memory).
This guide, any copyrightable subject matter sold or provided
with or in connection with the sale of the page printer, are
protected by copyright. All rights are reserved. Copying or other
reproduction of all or part of this guide, any copyrightable
subject matter without the prior written consent of Kyocera Mita
Corporation is prohibited. Any copies made of all or part of this
guide, any copyrightable subject must contain the same
copyright notice as the material from which the copying is done.
Regarding Tradenames
PRESCRIBE is a registered trademark of Kyocera Corporation.
KPDL and KIR (Kyocera Image Refinement) are trademarks of
Kyocera Corporation.
Diablo 630 is a product of Xerox Corporation. IBM Proprinter
X24E is a product of International Business Machines
Corporation. Epson LQ-850 is a product of Seiko Epson
Corporation.
Hewlett-Packard, PCL, and PJL are registered trademarks of
Hewlett-Packard Company. Centronics is a trade name of
Centronics Data Computer Inc. PostScript is a registered
trademark of Adobe Systems Incorporated. Macintosh is a
registered trademark of Apple Computer, Inc. Microsoft,
Windows, and Windows NT are registered trademarks of
Microsoft Corporation. PowerPC and Microdrive are
trademarks of International Business Machines Corporation.
CompactFlash is a trademark of SanDisk Corporation.
ENERGY STAR is a U.S. registered mark. All other brand and
product names are registered trademarks or trademarks of their
respective companies.
This Kyocera page printer uses PeerlessPrintXL to provide the
HP LaserJet compatible PCL 6 language emulation.
PeerlessPrintXL is a trademark of The Peerless Group,
Redondo Beach, CA 90278, U.S.A.
This product was developed using the Tornado™ Real Time
Operating System and Tools from Wind River Systems.
Contains UFST™ and MicroType® from Agfa
Corporation.
2
IBM PROGRAM LICENSE AGREEMENT
THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR
MORE SOFTWARE PROGRAMS (“PROGRAMS”) WHICH
BELONG TO INTERNATIONAL BUSINESS MACHINES
CORPORATION (“IBM”). THIS DOCUMENT DEFINES THE
TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE
IS BEING LICENSED TO YOU BY IBM. IF YOU DO NOT
AGREE WITH THE TERMS AND CONDITIONS OF THIS
LICENSE, THEN WITHIN 14 DAYS AFTER YOUR
ACQUISITION OF THE DEVICE YOU MAY RETURN THE
DEVICE FOR A FULL REFUND. IF YOU DO NOT SO RETURN
THE DEVICE WITHIN THE 14 DAYS, THEN YOU WILL BE
ASSUMED TO HAVE AGREED TO THESE TERMS AND
CONDITIONS.
The Programs are licensed not sold. IBM, or the applicable IBM
country organization, grants you a license for the Programs only
in the country where you acquired the Programs. You obtain no
rights other than those granted you under this license.
The term “Programs” means the original and all whole or partial
copies of it, including modified copies or portions merged into
other programs. IBM retains title to the Programs. IBM owns, or
has licensed from the owner, copyrights in the Programs.
1. License
Under this license, you may use the Programs only with the
device on which they are installed and transfer possession of
the Programs and the device to another party.
If you transfer the Programs, you must transfer a copy of this
license and any other documentation to the other party. Your
license is then terminated. The other party agrees to these
terms and conditions by its first use of the Program.
You may not:
1) use, copy, modify, merge, or transfer copies of the Program
except as provided in this license;
2) reverse assemble or reverse compile the Program; or
3) sublicense, rent, lease, or assign the Program.
2. Limited Warranty
The Programs are provided “AS IS.”
THERE ARE NO OTHER WARRANTIES COVERING THE
PROGRAMS (OR CONDITIONS), EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Some jurisdictions do not allow the exclusion of implied
warranties, so the above exclusion may not apply to you.
3. Limitation of Remedies
IBM’s entire liability under this license is the following;
1) For any claim (including fundamental breach), in any form,
related in any way to this license, IBM’s liability will be for
actual damages only and will be limited to the greater of:
a) the equivalent of U.S. $25,000 in your local currency; or
b) IBM’s then generally available license fee for the Program
This limitation will not apply to claims for bodily injury or
damages to real or tangible personal property for which IBM is
legally liable.
IBM will not be liable for any lost profits, lost savings, or any
incidental damages or other economic consequential damages,
even if IBM, or its authorized supplier, has been advised of the
possibility of such damages. IBM will not be liable for any
damages claimed by you based on any third party claim. This
limitation of remedies also applies to any developer of Programs
supplied to IBM. IBM’s and the developer’s limitations of
remedies are not cumulative. Such developer is an intended
beneficiary of this Section. Some jurisdictions do not allow these
limitations or exclusions, so they may not apply to you.
4. General
You may terminate your license at any time. IBM may terminate
your license if you fail to comply with the terms and conditions of
this license. In either event, you must destroy all your copies of
the Program. You are responsible for payment of any taxes,
including personal property taxes, resulting from this license.
Neither party may bring an action, regardless of form, more than
two years after the cause of action arose. If you acquired the
Program in the United States, this license is governed by the
laws of the State of New York. If you acquired the Program in
Canada, this license is governed by the laws of the Province of
Ontario. Otherwise, this license is governed by the laws of the
country in which you acquired the Program.
Typeface Trademark Acknowledgement
All resident fonts in this printer are licensed from Agfa
Corporation.
Helvetica, Palatino and Times are registered trademarks of
Linotype-Hell AG. ITC Avant Garde Gothic, ITC Bookman, ITC
ZapfChancery and ITC Zapf Dingbats are registered trademarks
of International Typeface Corporation.
Agfa Japan License Agreement
1. “Software” shall mean the digitally encoded, machine
readable, scalable outline data as encoded in a special
format as well as the UFST Software.
2. You agree to accept a non-exclusive license to use the
Software to reproduce and display weights, styles and
versions of letters, numerals, characters and symbols
(“Typefaces”) solely for your own customary business or
personal purposes at the address stated on the registration
card you return to Agfa Japan. Under the terms of this
License Agreement, you have the right to use the Fonts on
up to three printers. If you need to have access to the fonts
on more than three printers, you need to acquire a multi-user
license agreement which can be obtained from Agfa Japan.
Agfa Japan retains all rights, title and interest to the Software
and Typefaces and no rights are granted to you other than a
License to use the Software on the terms expressly set forth
in this Agreement.
3. To protect proprietary rights of Agfa Japan, you agree to
maintain the Software and other proprietary information
concerning the Typefaces in strict confidence and to
establish reasonable procedures regulating access to and
use of the Software and Typefaces.
Product specificaties
| Merk: | Kyocera |
| Categorie: | Printer |
| Model: | FS6020 |
Heb je hulp nodig?
Als je hulp nodig hebt met Kyocera FS6020 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Printer Kyocera
24 September 2024
24 September 2024
24 September 2024
1 September 2023
31 Augustus 2023
26 Augustus 2023
28 November 2022
19 Juni 2023
27 November 2022
15 Juni 2023
Handleiding Printer
- Printer HP
- Printer Sony
- Printer Samsung
- Printer Xiaomi
- Printer Panasonic
- Printer Epson
- Printer LG
- Printer Huawei
- Printer Canon
- Printer Honeywell
- Printer Olympus
- Printer Toshiba
- Printer Xerox
- Printer Brother
- Printer Builder
- Printer D-Link
- Printer Dell
- Printer Digitus
- Printer Dymo
- Printer Epson 7620
- Printer Frama
- Printer Fujifilm
- Printer Fujitsu
- Printer Ibm
- Printer Intermec
- Printer Kodak
- Printer Kogan
- Printer Konica Minolta
- Printer Lenovo
- Printer Lexmark
- Printer Minolta
- Printer Mitsubishi
- Printer MSI
- Printer Nec
- Printer Paxar
- Printer Polaroid
- Printer Primera
- Printer Renkforce
- Printer Ricoh
- Printer Roland
- Printer Royal Sovereign
- Printer Sagem
- Printer Seiko
- Printer Sharp
- Printer Star
- Printer Thomson
- Printer Tomy
- Printer Toshiba TEC
- Printer Triumph-Adler
- Printer Velleman
- Printer Zebra
- Printer Oce
- Printer Oki
- Printer Olivetti
- Printer Olympia
- Printer CSL
- Printer Argox
- Printer DTRONIC
- Printer Metapace
- Printer Citizen
- Printer Nilox
- Printer Approx
- Printer Ultimaker
- Printer Custom
- Printer Bixolon
- Printer Brady
- Printer GoDEX
- Printer Testo
- Printer EC Line
- Printer Sawgrass
- Printer Pantum
- Printer DNP
- Printer TSC
- Printer Equip
- Printer StarTech.com
- Printer Fichero
- Printer GG Image
- Printer Posiflex
- Printer ZKTeco
- Printer Star Micronics
- Printer Datamax-O'neil
- Printer Panduit
- Printer Dascom
- Printer HiTi
- Printer Vupoint Solutions
- Printer Elite Screens
- Printer Phoenix Contact
- Printer Colop
- Printer Raspberry Pi
- Printer Evolis
- Printer Middle Atlantic
- Printer IDP
- Printer Fargo
- Printer Microboards
- Printer Tally Dascom
- Printer Nisca
Nieuwste handleidingen voor Printer
20 November 2024
19 November 2024
19 November 2024
17 November 2024
17 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024