Kramer VM-4H2 Handleiding

Kramer Receiver VM-4H2

Lees hieronder de 📖 handleiding in het Nederlandse voor Kramer VM-4H2 (17 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
P/N: 2900-300565 Rev 3 www.kramerAV.com
USER MANUAL
MODEL:
VM-4H2
4K HDMI 2.0 1:4 DA
Kramer Electronics Ltd.
VM-4H2 Contents
i
Contents
Introduction 1
Getting Started 1
Overview 3
Typical Applications 3
Dening the VM-4H2 4K HDMI 2.0 1:4 DA 4
Setting the DIP-Switches 4
LED Indications 5
Mounting VM-4H2 6
Connecting the VM-4H2 7
EDID Acquisition Policy 8
Upgrading the Firmware 9
Supported Input Resolutions 10
Default EDID 11
Technical Specications 13
Kramer Electronics Ltd.
VM-4H2 Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and aordable solutions to the vast range of problems that confront video,
audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better!
Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging materials for
possible future shipment.
Review the contents of this user manual.
Go to www.kramerav.com/downloads/VM-4H2 to check for up- -date user manuals, to
application programs, and to check if rmware upgrades are available (where appropriate).
Achieving Best Performance
Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).
Do not secure the cables in tight bundles or roll the slack into tight coils.
Avoid interference from neighboring electrical appliances that may adversely inuence
signal quality.
Position your Kramer away from moisture, excessive sunlight and dust. VM-4H2
Safety Instructions
Caution:
This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
For products with relay terminals and GPI\O ports, please refer to the permitted rating
for an external connection, located next to the terminal or in the User Manual.
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Disconnect the power and unplug the unit from the wall before installing.
Do not open the unit. High voltages can cause electrical shock! Servicing by qualied
personnel only.
To ensure continuous risk protection, replace fuses only according to the rating
specied on the product label which located on the bottom of the unit.


Product specificaties

Merk: Kramer
Categorie: Receiver
Model: VM-4H2

Heb je hulp nodig?

Als je hulp nodig hebt met Kramer VM-4H2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Kramer

Handleiding Receiver

Nieuwste handleidingen voor Receiver