Kramer Galil 6-AW Handleiding

Kramer Speaker Galil 6-AW

Lees hieronder de 📖 handleiding in het Nederlandse voor Kramer Galil 6-AW (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Galil 6- Quick StartAW
P/N:
2900- 301402QS
Rev:
2
Scan for full manual
Step 1: Check in the b what’s ox
Galil 6- All Weather SpeakersAW
4 knobs
2 cable glands
1 Quick start guide
2 mounting U-brackets
4 mounting screws
2 grommets
1 User manual
Step 2: Get to know your Galil 6- AW
#
Feature
Function
1
Speaker Grille
Protects the internal components of the speaker from foreign objects.
Do not remove the grille from the speakers.
2
Tweeter
Emits high frequency sounds.
3
Woofer Driver
Emits low frequency sounds.
4
Keyhole Mounting Point
Use to attach the U-bracket to a wall.
5
U-Bracket
Use to mount the speaker onto a wall (allowing left/right rotation).
6
U-Bracket knobs (2x2)
Use to fasten the U-bracket to the speaker (two knobs per bracket).
7
Input and Output Terminal
Block Connectors
One +, - pair for the input and one +, - pair to output to the next speaker in an array
conguration.
8
Tap Selector
Adjust each speaker to the appropriate tap setting:
For 70V: select 3.7 7.5W, 15W, or W For 100V: select 7.5W, 1 , or 3 . W, 30 ; 5W 0W
Alternatively, select 8 to bypass the transformer when connecting directly to an amplier
without using the 70/100V array option.
9
Protective Cover
Protects speaker cables and tap selector.
10
Cable Gland/Grommet
Pass the speaker cable through the cable gland/grommet to protect the connectors from outdoor
weather conditions.
Step 3: Choose the best location
Before installing the speakers:
Experiment by placing the speakers in dierent locations before nally deciding on the most suitable location.
Be sure that the wall type is appropriate for the mounting U-brackets, that is, either solid wood, bricks, concrete,
hollow building blocks, or wood studs.
Check that the mounting location is free of obstructions, such as electrical piping, AC ducts or water lines, and so on.
Step 4: Install the Galil 6- AW
Always switch OFF the power on each device before connecting it to your .
Galil 6-AW
To connect the to the amplier Galil 6-AW :
1. Cut the dual color cable wires to similar lengths, leaving some excess wire to easily
remove the speakers from the U-brackets.
For outdoor installations you need to use weatherproof cables.
2. Adjust the tap setting.
3. Connect the wires to the appropriate terminal block connectors on the speaker.
4. Mount the grommet/cable gland on the protective cover and pass the cables
through the grommet/cable gland and the protective cover.
5. Close the tap selector and connector opening with the protective cover.
6. Connect the mounting U-brackets.
7. Connect the wires to the amplifier (left speaker wires to amplifier “L” terminal blocks
and right speaker to amplifier “R” terminal blocks.
The following diagram displays the speakers connected Galil 6-AW
to a recommended Kramer power amplier
(for example, ): PA-120Z
For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/Galil 6-AW.
Using thi -party cables may cause damage! rd


Product specificaties

Merk: Kramer
Categorie: Speaker
Model: Galil 6-AW

Heb je hulp nodig?

Als je hulp nodig hebt met Kramer Galil 6-AW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Kramer

Handleiding Speaker

Nieuwste handleidingen voor Speaker