Kramer CRS-AOCH/COLOR-131 Handleiding

Kramer Kabels voor pc's en randapparatuur CRS-AOCH/COLOR-131

Lees hieronder de 📖 handleiding in het Nederlandse voor Kramer CRS-AOCH/COLOR-131 (4 pagina's) in de categorie Kabels voor pc's en randapparatuur. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Installation Instructions

MODEL:

CRS-AOCH/COLOR

Fiber Opc HDMI Cable

SAFETY WARNING

Disconnect the unit from the power supply before opening servicingand

For the latest information products a list Kramer distributors, visit our Web site where on our and of

updates to this user manual may be found.

We welcome your questions, comments, feedback.and

www.kramerAV.com

info@kramerel.com

P/N:

2900- 300699

Rev:

CRS-AOCH/COLOR Fiber Optic High Speed Pluggable HDMI Cable

Congratulations on purchasing your Kramer Plug and Play active Fiber Optic CRS-AOCH/COLOR

High Speed Pluggable HDMI Cable. The provides an extremely high quality CRS-AOCH/COLOR

signal over a wide range of resolutions, up to 4K@30Hz. This cable is available in various lengths

from 33ft (10m) up to 328ft (100m).

Features

The CRS-AOCH/COLOR:

 Supports a wide range of resolutions up to 4K@30Hz Full HD, 3D, Deep Color

 Supports Multi-channel audio, Dolby True HD, DTS- Master Audio HD

 Is HDMI compliant: EDID, CEC, HDCP

 Inherently provides protection from electromagnetic interference (EMI) and radio frequency

interference (RFI)

 Has built-in powering with low power consumption

 Has high pulling strength

Cable Dimensions

The CRS-AOCH/COLOR includes four optical ﬁbers and six AWG 28 wires with compact size HDMI

connectors. The cable has a SOURCE color end to which the source is connected (for green ed

example, a DVD, Blu-ray or game console box) and a DISPLAY colored end to which the acceptor red

is connected (for example, a projector, an LCD display or a tablet device), see . Figure 1

Figure 1: HDMI Connectors SOURCE and DISPLAY (with Dimensions) –

CRS-AOCH/COLOR Plug and Play Installation

Before installing the cable, make sure that you have an HDMI graphic card or devices with an HDMI

port (for example, a PC, laptop, DVD/Blue-ray player or any other video/audio signal source devices).

Kramer CRS-AOCH/COLOR Fiber Optic HDMI cables are designed to take

+5V DC power from the source devices to the HDMI pin #18 of the SOURCE

side connector on the cable.

Optical ﬁber cable is not robust physically compared to conventional copper

cable materials. Even if this cable is designed to be seamlessly resistant at

certain levels of artiﬁcial strengths to the cable, CRS-AOCH/COLOR can be

damaged if it is excessively pinched, twisted or kinked when being installed

and after being installed. Be careful not to bend or twist the cable tightly.

When is installed into the conduit, the ﬁber pulling CRS-AOCH/COLOR

strength and the bending radius are the key conditions to safe installation of

the cable:

Maximum ﬁber bending radius: 90mm

Maximum ﬁber pulling/tensile strength: 50kg (500N)

Crush Resistance: 50kg (500N)

Do not disassemble or modify the products, especially the HDMI connector

head parts. Do not remove the dust plug before the cable laying process is

completed. HDMI connector heads are very critical parts. Remove the head at

the last moment just before the connector is plugged into the source or the

display devices after the installation is complete.

To install the CRS-AOCH/COLOR:

1. Unpack the cable from the package with care and remove the cable tie.

We recommend that you save the original box and packaging materials for possible future

shipment.

2. Install the cable (for example, an in-wall or conduit installation or under-ﬂoor installations).

3. Once the cable installation is complete, remove the dust cap and plug the SOURCE green

connector head of the cable into the source devices.

Do not plug the SOURCE green connector to the display device.

4. Remove the dust cap and plug the DISPLAY connector head of the cable into the display red

devices.

Do not plug the DISPLAY connector to the source devicered .

5. Switch on the power of source and display devices.

Troubleshooting

If you have encountered a problem, check that:

 The source and display devices are both switched on

 Both HDMI connector heads are fully plugged into the devices

 The cable or its jacket not physically damaged is

 The cable is not bent or kinked

It is important to connect the cable correctly as marked on the end of each connector:

SOURCE ( to the source side and DISPLAY ( to the acceptor side.green) red)

Product specificaties

Merk:	Kramer
Categorie:	Kabels voor pc's en randapparatuur
Model:	CRS-AOCH/COLOR-131
Kleur van het product:	Black, Blue, Red
Snoerlengte:	40 m
Gewicht verpakking:	900 g
Gebruikershandleiding:	Ja
Ondersteunde video-modi:	1080p
Maximum resolutie:	4096 x 2160 Pixels
HDCP:	Ja
Maximale refresh snelheid:	60 Hz
3D:	Ja
Ondersteunde grafische resoluties:	1920 x 1080 (HD 1080)
Duurzaamheidscertificaten:	RoHS
Plug and play:	Ja
Aantal per verpakking:	1 stuk(s)
Kleurdiepte:	8 Bit
Temperatuur bij opslag:	0 - 50 °C
Contact geleider materiaal:	Goud
Overdrachtssnelheid:	10.2 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 85 procent
AWG draad omvang:	28
Aansluiting 1:	HDMI Type A (Standaard)
Aansluiting 2:	HDMI Type A (Standaard)
Connector 1 vormfactor:	Recht
Connector 2 vormfactor:	Recht
Aansluiting 1 type:	Mannelijk
Aansluiting 2 type:	Mannelijk
Diameter van de kabel:	4.5 mm
Kabelhulsmateriaal:	Thermoplastic polyurethaan (TPU)
Kabel materiaal:	Vezel-optiek
Dolby technologieën:	DTS-HD Master Audio, Dolby Digital Plus, Dolby TrueHD