Korg TM-60C Handleiding

Korg DJ Gear TM-60C

Lees hieronder de 📖 handleiding in het Nederlandse voor Korg TM-60C (33 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/33
Owner's Manual (¬p.2)
Manuel d'utilisation (¬p.8)
Bedienungsanleitung (¬s.15)
Manual de usuario (¬p.22)
取扱説明書 (¬p.29)
Thank you for purchasing the Korg TM-60/TM-60C COMBO
TUNER METRONOME. To help you get the most out of your
new instrument, please read this manual carefully.
Merci d’avoir choisi la Combo Accordeur Métronome TM-
60/TM-60C de Korg. Afin de pouvoir exploiter au mieux
toutes les possibilités oertes par l’instrument, veuillez lire
attentivement ce manuel.
Vielen Dank, dass Sie sich für einen TM-60/TM-60C
Kombination aus Stimmget und Metronom von Korg
entschieden haben. Bitte lesen Sie sich diese Anleitung
vollstädig durch, um bei der Bedienung alles richtig zu
machen.
Gracias por comprar el anador para enchufar TM-60/TM-
60C Combo Afinador Metrónomo de Korg. Por favor, lea
este manual atentamente y guárdelo para futuras consultas.
は、ルグ COMBO TUNER METRONOME TM-
60/TM-60C をお買い上げいただきまして、まことにありがと
うございます。本製品を末永くご愛用いただくためにも、取扱
説明書をよくお読みになって、正しい方法でご使用ください。
Main Features
With the TM-60/TM-60C you can tune instruments using the
internal mic or by connecting them to the INPUT jack.
You can use the tuner and metronome individually or simulta-
neously.
Installing batteries
1.
Slide the battery compart-
ment cover on the back
of the TM-60/TM-60C in
direction a as shown in
the illustration and lift up
the cover in direction “b.
2.
Insert the batteries, making
sure to observe the correct
polarity, and then close the cover.
If the unit malfunctions try removing and then reinstalling the
batteries.
When the batteries become
depleted, a battery symbol
will appear on the left side
of the display. When this oc-
curs, it’s time to replace the
batteries.
Using the stand
You can use the stand
provided on the back of
the TM-60/TM-60C to tilt
it back at an angle for
easy viewing.
Parts of the TM-60/TM-60C
1.
TUNER ON button
2.
SOUND/SOUND BACK button
3.
CALIB·NOTE , buttons
4.
Backlight button
5.
MIC
6.
Speaker
7.
Tuning guide
8.
VOL (Volume control)
9.
METRONOME ON button
10.
BEAT , buttons
11.
TEMPO , buttons
12.
START/STOP button
13.
TAP TEMPO button
14.
(Headphones) jack
15.
INPUT jack
16.
Display
a. Reference pitch b. Note name
c. TEMPO (metronome tempo) d. BEAT (metronome beat)
Turning the power on/o
Turning the power on
Press either the TUNER ON button or the METRONOME ON
button and the power will turn on. Press the button for the
function that you want to use.
When the TUNER ON button is pressed, the tuner starts in the
Meter mode and will appear on the display.
When the METRONOME ON button is pressed, the metronome
starts and will appear on the display.
The TM-60/TM-60C can use the tuner and metronome simulta-
neously.
The TUNER ON button and the METRONOME ON button are
designed lower than other buttons so that the power is not
turned on involuntarily when the TM-60/TM-60C is placed
in your pocket or in a bag. To turn the device on or o, push
in the power button.
Turning the tuner o
When the tuner is in use, press the TUNER ON button to turn o
the power. The tuner will also turn o automatically if it’s not in
use for twenty minutes.
Turning o the metronome
When the metronome is in use, press the METRONOME ON
button to turn o the power. The metronome will also turn o
automatically if not in use for twenty minutes.
Connections
If you want to connect an instrument, contact mic, etc.
If you want to tune an instrument with a pickup, such as an
electric guitar, connect a cable to your instrument, and plug the
cable into the TM-60/TM-60Cs INPUT jack.
The INPUT jack is only for a 1/4” mono cable. Stereo (TRS)
cables cannot be used.
If you want to tune your instrument using the Korg CONTACT
MICROPHONE, plug the contact mic into the TM-60/TM-60Cs
INPUT jack.
If a device is not connected to the INPUT jack, tuning will
be performed by the internal mic.
Connecting headphones
You can connect commercially available headphones with
a 1/8 stereo mini-plug to the (headphones) jack. When
plugged in, no sound will be heard from the speaker. Use the
volume control to adjust the volume of the headphones output.
Using the tuner
Tuning using the meter (Meter mode)
1.
Connect your instrument cable or contact mic to the TM-60/
TM-60C’s INPUT jack.
If a device is not connected to the INPUT jack, tuning will
be performed by the internal mic.
2.
Press the TUNER ON button.
will appear on the display and the reference
pitch (calibration) will be displayed below that.
3.
To change the reference pitch, press the CALIB or ·NOTE
button.
The reference pitch increases or decreases in steps of 1 Hz.
By pressing and holding these buttons, you can increase or
decrease the reference pitch continuously. This setting is
stored even when the power is o.
4.
Play a single note on your instrument.


Product specificaties

Merk: Korg
Categorie: DJ Gear
Model: TM-60C

Heb je hulp nodig?

Als je hulp nodig hebt met Korg TM-60C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding DJ Gear Korg

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear