Korg Kaoss Pad Mini 2S Handleiding

Korg DJ Gear Kaoss Pad Mini 2S

Lees hieronder de 📖 handleiding in het Nederlandse voor Korg Kaoss Pad Mini 2S (16 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 117 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan
2006 KORG INC.
Connections
LINE IN LINE OUT
DC4.5V
MIXER
AC
CD PLAYER
Option: AC ADAPTER
PHONES
DJ MIXER
LINE IN
MP3 PLAYER
PHONES
Liaisons
Anschlüsse

Precautions
Location
Using the unit in the following locations can result in a
malfunction.
In direct sunlight
Locations of extreme temperature or humidity
Excessively dusty or dirty locations
Locations of excessive vibration
Close to magnetic fields
Power supply
Please connect the designated AC adapter to an AC
outlet having the correct voltage. Do not connect it to
an AC outlet having a voltage other than that speci-
fied for your unit.
Interference with other electrical devices
Radios and televisions placed nearby may experience
reception interference. Operate this unit at a suitable
distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to
the switches or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry
cloth. Do not use liquid cleaners such as benzene or
thinner, or cleaning compounds or flammable polishes.
Keep this manual
After reading this manual, please keep it for later ref-
erence.
Keeping foreign matter out of your equipment
Never set any container with liquid in it near this equip-
ment. If liquid gets into the equipment, it could cause
a breakdown, fire, or electrical shock.
Be careful not to let metal objects get into the equip-
ment. If something does slip into the equipment, un-
plug the AC adapter from the wall outlet. Then contact
your nearest Korg dealer or the store where the equip-
ment was purchased.
* Company names, product names, and names of
formats etc. are the trademarks or registered trade-
marks of their respective owners.
THE FCC REGULATION WARNING (for U.S.A.)
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harm-
ful interference to radio communications. However,
there is no guarantee that interference will not oc-
cur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Unauthorized changes or modification to this sys-
tem can void the user’s authority to operate this
equipment.
CE mark for European Harmonized Standards
CE mark which is attached to our companys prod-
ucts of AC mains operated apparatus until Decem-
ber 31, 1996 means it conforms to EMC Directive
(89/336/EEC) and CE mark Directive (93/68/EEC).
And, CE mark which is attached after January 1,
1997 means it conforms to EMC Directive (89/336/
EEC), CE mark Directive (93/68/EEC) and Low Volt-
age Directive (73/23/EEC).
Also, CE mark which is attached to our company’s
products of Battery operated apparatus means it
conforms to EMC Directive (89/336/EEC) and CE
mark Directive (93/68/EEC).
IMPORTANT NOTICE TO CONSUMERS
This product has been manufactured according to
strict specifications and voltage requirements that
are applicable in the country in which it is intended
that this product should be used. If you have pur-
chased this product via the internet, through mail
order, and/or via a telephone sale, you must verify
that this product is intended to be used in the coun-
try in which you reside.
WARNING: Use of this product in any country other
than that for which it is intended could be danger-
ous and could invalidate the manufacturers or
distributor’s warranty.
Please also retain your receipt as proof of purchase
otherwise your product may be disqualified from the
manufacturers or distributor’s warranty.
Thank you for purchasing the KAOSS PAD mini-
KP Dynamic Effect Processor. For trouble-free
enjoyment of the mini-KP’s fullest potential,
please read this manual carefully and use the
mini-KP only as directed.
Parts of the mini-KP
PROGRAM/BPM knob
PEAK indicator
Display
LINE IN jacks LINE OUT jacks
DC jack
VOLUME
PHONES jack
Touch pad
HOLD button
HOLD indicator
ON/STANDBY switch MEMORY B button
MEMORY A button
TAP/BPM button
Replacing the batteries
The display will indicate “Lowhen the batteries
are running low. Please replace the batteries as
soon as possible.
You must turn off the power switch before re-
placing the batteries.
The included batteries are provided so that you
can verify that the unit operates correctly, and may
have a shorter lifespan than expected.
Use only alkaline batteries.
If the batteries become unusable, remove them
immediately. You should also remove the batteries if
you won't be using the unit for an extended time.
1. On the bottom panel, slide the battery case
cover in the direction of the arrow to open it.
2. Install four AA batteries. Make sure that the
batteries are in-
serted in the cor-
rect polarity (+, -).
3. Close the battery
case cover.
Turning the power on/off
Turning the power on
Set the ON/STANDBY switch to the ON position;
this turns the power on.
Turning the power off
Set the ON/STANDBY switch to the STANDBY
position; this will turn the power off.
If you’re using the mini-KP on battery power,
don’t forget to turn the power off when you are done
using it.
Connection setting
Hold down the MEMORY A button and press the
B button. Use the PROG/VALUE knob to select
“dir” (direct) or “snd (send).
Choose the “dir” setting if you are connecting an
instrument or audio device directly to the mini-
KP (as in the diagram above). Choose the “snd
setting if the mini-KP will be connected to the
effect send and return jacks of your mixer or
other device.
To return to the normal play mode, once again
hold down the MEMORY A button and press the
B button. The mini-KP will also return to the nor-
mal play mode (program selection state) after
about three seconds if no additional setting op-
erations are performed.
This setting will be remembered even when the
power is turned off.
About the input level
The PEAK indicator will light red if the input sig-
nal level is too high. In this case, reduce the
output volume of the device that's connected to
the mini-KP.
Use the VOLUME knob on the front to adjust the
headphone volume.
Operation
Operating the touch pad
You can control the sound by rubbing or tapping
your finger on the touch pad. Each axis (X, Y) will
provide realtime control of a different effect pa-
rameter.


Product specificaties

Merk: Korg
Categorie: DJ Gear
Model: Kaoss Pad Mini 2S

Heb je hulp nodig?

Als je hulp nodig hebt met Korg Kaoss Pad Mini 2S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding DJ Gear Korg

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear