Konig OSP-SX118SA Handleiding

Konig Subwoofer OSP-SX118SA

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig OSP-SX118SA (58 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/58

OSP-SX110ta/OSP-SX112ta

OSP-SX115sa/OSP-SX118sa

MANUAL (p. 2 )

Active Speaker System 15” + 12”

ANLEITUNG (S. 6 )

Aktives Lautsprechersystem 15” + 12”

MODE D’EMPLOI (p. 10 )

Système de Haut-parleurs Actif 15” + 12”

GEBRUIKSAANWIJZING (p. 14 )

Actief luidsprekersysteem 38 en 30,5 cm (15

en 12 inch)

MANUALE (p. 18 )

Sistema casse attive 15” + 12” MANUAL DE USO (p. 22 )

Sistema de altavoces activo 15” + 12”

HASZNÁLATI ÚTMUTATÓ (o. 26. )

15” + 12”-os aktív hangszórórendszer KÄYTTÖOHJE (s. 30 )

Aktiivikaiutinjärjestelmä 15” + 12”

BRUKSANVISNING (s. 34 )

Aktivt högtalarsystem 15” + 12” NÁVOD K POUŽITÍ (s. 38 )

Systém aktivních reproduktorů 15” + 12”

MANUAL DE UTILIZARE (p. 42 )

Sistem activ de difuzoare 15” + 12” ΕΓΧΕΙΡΙ∆ΙΟ XPHΣ ΣH (σελ. 46 )

Ενεργό Σύστημα Ηχείων 15” + 12”

BRUGERVEJLEDNING (p. 50 )

Aktivt højttalersystem 15” + 12”

VEILEDNING (p. 54 )

Aktivt høyttalersystem 15” + 12”

ENGLISH

Active Speaker System 15” + 12”

Rear Panel Description – Top Speaker

01. Mic/line input XLR/1/4 TRS (tip-ring sleeve) input jack

02. Mic gain Adjust microphone level

03. EQ control high EQ setting for high frequencies

04. Peak indicator The peak indicator prevents the amplifier outputs from overdriving the

transducers. It lights up when the limiter is activated. It is okay for the peak

indicator to blink occasionally, but if it blinks frequently or lights up continuously,

turn down the level control.

05.Master volume This knob adjusts all signal input or mic level.

06. EQ low control EQ setting for low frequencies

07. Low cut/full range

switch

When the switch is turned off, the top speaker can be used as a full range

speaker.

08. Through

(full range output)

Male XLR-type connector that produces exactly the same signal that is connected

to the main input jack. Use it to daisy-chain several active systems of the same

signal source together.

09. Main input Female XLR-type connector that accepts a balanced line-level signal from a

mixing console or other signal source.

10. Power switch Use this switch to turn the system on and off. Make sure the signal source level

control is turned down before you turn it on.

11. Power in This is where you connect the AC line cord to provide AC power. Plug the line cord

into an AC socket properly configured for your particular model.

12. Fuse holder When a problem occurs in this system, the fuse will cut off the power. To replace,

use a standard fuse as specified.

13. Power out AC power out to top system or another active system which is equipped with

powercon-3.

Rear Panel Description – Sub Speaker

01. Full range input Female XLR-type connector that accepts a balanced line-level signal from a

mixing console or other signal source

02. Subwoofer level

control

Adjusts the subwoofer level. Use this as a starting point for setting the balance

between the subwoofer and the main speaker.

03. Frequency control With this control you can adjust the bass frequency from 40 Hz to 200 Hz to

balance the bass and top speakers.

04. Limit peak indicator The peak indicator prevents the amplifier outputs from overdriving the

transducers. It lights when the limiter is activated. It is okay for the peak indicator

to blink occasionally, but if it blinks frequently or lights continuously, turn down the

level control.

05. Through

(full range output)

Male XLR-type connector that produces exactly the same signal that is connected

to the main input jack. Use it to daisy-chain several active systems of the same

signal source together.

06. Power switch Use this switch to turn the system on and off. Make sure the signal source level

control is turned down before you turn it on.

07. Power in This is where you connect the AC line cord to provide AC power. Plug the line cord

into an AC socket properly configured for your particular model.

08. Fuse holder When a problem occurs in this system, the fuse will cut off the power. To replace,

use a standard fuse as specified.

09. Power out AC power out to top system or another active system which is equipped with

powercon-3.

TIPS

Do not expose electronic circuitry to moisture!

When the system is placed outdoors, be sure to protect it from rain. Keep drinks and all other liquids well

away from the cabinets to protect their electronic components from short circuits.

Ensure that the ducts on the enclosures rear panels are free of dirt and the system is properly ventilated,

otherwise electronic components may overheat and suffer damage.

Product specificaties

Merk:	Konig
Categorie:	Subwoofer
Model:	OSP-SX118SA
Kleur van het product:	Zwart
Gewicht verpakking:	49800 g
Meegeleverde kabels:	AC
Afmetingen verpakking (BxDxH):	570 x 660 x 720 mm
Gemiddeld vermogen subwoofer:	600 W
Diameter driver subwoofer (imperiaal):	18 "
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	40 - 200 Hz
Breedte van de subwoofer:	500 mm
Hoogte van de subwoofer:	660 mm
Diepte van de subwoofer:	600 mm
Gewicht subwoofer:	44000 g
Subwoofer sensitiviteit:	102 dB
XLR in:	Ja
Subwoofer maximale vermogen:	1200 W