Konig KN-MICW620 Handleiding

Konig Microfoon KN-MICW620

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig KN-MICW620 (68 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/68
56
SYSTÉM S BEZDRÁTOVÝM
MIKROFONEM
44
LANGATON
MIKROFONIJÄRJESTEL
32
SISTEMA DE MICRÓFONO
INALÁMBRICO
20
DRAADLOOS
MICROFOONSYSTEEM
8
DRAHTLOSES MIKROFONSYSTEM
62
SISTEM CU MICROFON WIRELESS
50
TRÅDLÖST MIKROFONSYSTEM
38
VEZETÉK NÉLKÜLI
MIKROFONRENDSZER
26
SISTEMA DI MICROFONO
WIRELESS
14
ENSEMBLE MICRO SANS FIL
WIRELESS MICROPHONE SYSTEM
KN-MICW620
2
ENGLISH
Introd ion:uct
Wir ss microphone stem with two microphones and a information display. True ele sy
diver ty for a opt al reception. The system is equipped with a special voice l iter si im im
com essor to avoid distortion caused by high nd peaks. pr sou
Description ceiver:re
1. POWER: On/off button
2. SELECT: switch between receiver A and B for the use of buttons 3, 4 or 5
3. SET: button for function set, tune or pre-programmed channels
4. UP: button for tuning up or channel selection up of pre-pro ammed channelsgr
5. DOWN: button for tuning down or channel selection down of pre-pro ammed channelsgr
6. DISPLAY: separate for receiver A and B
7. VOLUME CONTROL: separate for receiver A and B
8. ANTENNA: separate antenna for receiver A and B
9. ANTENNA CONNECTOR: for connection of antenna A and B
10. UNBALANCED AUDIO OUTPUT: 6,35mm output for mixed signal (A+B) or separate
signal of receiver A and B
11. BALANCED AUDIO OUTPUT: separate XLR separate XLR outputs for channel A & B
3
Description LCD display receiver:
RF: Shows the strength of the received microphone signal
AF: Shows the microphone‘s audio signal level
CH01: Selected pre-programmed channel
A ANT: The antenna which receives the signal of the microphone (A for receiver
A and B for receiver B)
864.40: Frequency of the selected pre-programmed channel
OPEN: Shows which receiver (display) is selected for the use of function
buttons 2~5
AUTO: Shows that the microphone is powered off. Appears also when there is no
connection with the microphone on the showed frequency in the display.
MUTE: There is no audio output from the receiver to mixer or amplifier because
the microphone is powered off or there is no reception
TUNE: Push the SELECT button (2) to switch between manual tuning or
pre-programmed channels. With manual tuning it's possible to select the
frequency by steps of 0,05MHz. The range is 840.00MHz till 868.00MHz.
This feature offers the use of other wireless microphones operating in
the frequency band from 840.00MHz till 868.00MHz. Note: the supplied
microphones are pre-programmed from 863.00MHz till 865.00MHz
IMPORTANT NOTICE:
It‘s the responsibility of the user to ensure that the use of frequencies comply
with the local regulations and does not cause interference with other users.


Product specificaties

Merk: Konig
Categorie: Microfoon
Model: KN-MICW620
Kleur van het product: Zwart
Gewicht verpakking: 3620 g
Soort: Microfoon voor podiumpresentaties
Connectiviteitstechnologie: Draadloos
Afmetingen verpakking (BxDxH): 290 x 490 x 125 mm
Ondersteund aantal accu's/batterijen: 2
Frequentiebereik: 40Hz - 15KHz
Meegeleverde ontvanger: Ja
Operating voltage: 1.5 V
XLR out: Ja
Stroomverbruik (typisch): 4 W
Type batterij: AA
RF vermogen: 10 mW
Dynamisch bereik: 90 dB
Microphone Total Harmonic Distortion (THD): 0.5 procent

Heb je hulp nodig?

Als je hulp nodig hebt met Konig KN-MICW620 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Konig

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon